Buttons & Switches

SKU: SF-COM-15290 | Brand: SparkFun

Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun...

SKU: TB-SP0716 | Brand: Little Bird

A simple, reliable momentary pushbutton switch with a red actuator. Press to close the circuit, release to open — ideal for control panels, reset buttons, and general-purpose switching. Panel-mounts into a 6 mm round ...

SKU: AF-3423 | Brand: Adafruit

By popular demand, we now have rugged metal buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair.This is a 22mm Momentary version of ...

SKU: AF-5296 | Brand: Adafruit

The Adafruit LED Arcade Button 1×4 QT I2C Breakout lets you connect up to four illuminated arcade buttons to any microcontroller over I2C. A built-in seesaw microcontroller handles button press detection and LED PWM c...

SKU: AF-4978 | Brand: Adafruit

The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow - and that's what the Adafruit NeoKey Breakout will let you do! This little 0.75" x 0.85" PCB can fit one Cherry MX ...

SKU: M5-U025 | Brand: Little Bird

Description Dual Button, as its namesake, has two buttons with different color. If the Button unit is not enough, how about double it up to a pair. They share the exact same mechanism, button status can be detected...

SKU: PI-COM0413 | Brand: Pimoroni

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up! So now you can get visual feedback, or light up your project. These have a 12mm body and ar...

SKU: AF-1109 | Brand: Adafruit

The Adafruit RGB Positive 16×2 LCD + Keypad Kit is a Pi Plate that combines a 16×2 character LCD with RGB backlight and a 5-button keypad, all controlled over I2C using just two pins. The positive-style display shows ...

SKU: PI-COM0411 | Brand: Pimoroni

This LED tactile button combines a standard momentary push switch with a built-in red LED, all housed under a clear cap. It provides visual feedback when illuminated, making it ideal for control panels, interactive pr...

SKU: AF-1110 | Brand: Adafruit

The Adafruit RGB Negative 16×2 LCD + Keypad Kit is a Pi Plate that combines a 16×2 character LCD with RGB backlight and a 5-button keypad, all controlled over I2C using just two pins. The negative-style display shows ...

SKU: PR-PIM028 | Brand: Little Bird

The Touch module has four capacitive touch buttons and four bright white LEDs. It's ideal for reaction time games, a tiny piano, or a code entry keypad. Features CAP1166 driver chip Four capacitive touch...

SKU: PR-PIM034 | Brand: Little Bird

An analogue joystick module for the Pimoroni Flotilla ecosystem, featuring a two-axis thumbstick with a built-in click button. Use it as a game controller, to steer a robot, or as a general-purpose input device. Key ...

SKU: AF-915 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water ou...

SKU: AF-4020 | Brand: Adafruit

Everything you need to get started with the NeoTrellis M4 in one kit. This pack bundles the NeoTrellis M4 Mainboard, an acrylic enclosure, silicone elastomer button pads, and rubber feet — ready to assemble into a com...

SKU: LB-00331 | Brand: Little Bird

A small push-button switch module on a breakout board with a built-in pull resistor, so no external resistors are needed. The 3-pin header (signal, VCC, GND) plugs directly into a solderless breadboard or connects via...

SKU: SF-COM-09179 | Brand: SparkFun

A 33 mm round momentary pushbutton in arcade style with a convex green cap. Features a simple screw-in design for easy panel mounting — ideal for arcade builds, interactive projects, and control panels. Specification...

SKU: SF-COM-11967 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated blue LED ring. It is a SPDT with 16mm threadi...

SKU: SF-COM-11966 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated red LED ring. It is a SPDT with 16mm threadin...

SKU: SF-COM-10442 | Brand: SparkFun

A tactile push button with a built-in red LED, combining momentary switching with visual feedback in a single component. Press the button and it lights up red — ideal for control panels, interactive projects, and anyw...

SKU: SF-COM-10439 | Brand: SparkFun

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up white! So now you can get visual feedback, or light up your project. These have a 12mm body and...