Buttons & Switches

SKU: PL-1406 | Brand: Pololu

This single-pole, double-throw (SPDT) rocker switch makes a great on/off power switch. It is rated for 10 A at 125 VAC and 6 A at 250 VAC.

SKU: AF-1443 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired ...

SKU: AF-1444 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired...

SKU: AF-1476 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in blue LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired i...

SKU: AF-1400 | Brand: Adafruit

The Adafruit Push-button Power Switch Breakout lets you toggle DC power on and off with a simple button press. A latching analogue circuit uses a 3A P-FET to connect or disconnect the input to the output — press once ...

SKU: AF-1478 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in white LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired ...

SKU: SF-COM-10860 | Brand: SparkFun

A simple SMD slide switch. Perfect for when you need access to a setting or a power switch from the edge of a PCB buried deep within a project. Features: 4V - 300mA 70mOhm resistance 10,000 cycle life Documen...

SKU: PL-2808 | Brand: Pololu

A compact latching power switch with built-in reverse voltage protection. One push turns power on, another push turns it off – providing clean, reliable power control without bulky mechanical switches. This low-volta...

SKU: SF-COM-11971 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm thread...

SKU: AF-5783 | Brand: Adafruit

The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your ...

SKU: SF-COM-11975 | Brand: SparkFun

A heavy-duty, panel-mount latching pushbutton with an illuminated white LED ring. Built from stainless steel with IP65 weatherproofing, this 16mm threaded switch is designed to withstand tough environments while deliv...

SKU: SF-COM-11972 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated blue LED ring. It is a SPDT with 16mm threa...

SKU: DF-DFR0789 | Brand: DFRobot

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little butt...

SKU: TB-ST0505 | Brand: Little Bird

A miniature 3PDT (3-pole, double-throw) toggle switch for panel-mount applications. With three independent switching circuits, this switch can control multiple signals simultaneously — commonly used in guitar effect p...

SKU: AF-1685 | Brand: Adafruit

A push-button toggle switch with three wire leads. Each press alternates the connection — push once to connect the middle pin to one side, push again to switch it to the other. It functions as a simple, satisfying mec...

SKU: DF-DFR0423 | Brand: DFRobot

INTRODUCTION This module is a self-locking switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating and...