Brands

SKU: AF-3275 | Brand: Adafruit

If the holidays promise anything, it’s almost certainly a deluge of photographs. Instead of taking out your smartphones, why not build your own camera? With one of Adafruit’s best selling screens and an official...

SKU: DF-DWG0006-L | Brand: DFRobot

INTRODUCTION A stylish imprint T-Shirt featured with DFRobot's special maker design, 100% cotton. One of DFRobot must-haves! SPECIFICATION ...

SKU: SF-BOB-10467 | Brand: SparkFun

This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project. Note: Populate the board according to the polarity of the LED on the switch. The markings for the swi...

SKU: SF-PRT-10461 | Brand: SparkFun

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. Each standoff has an outer diameter of 6mm. Sold in pack...

SKU: AF-50 | Brand: Adafruit

We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most...

SKU: SF-COM-10443 | Brand: SparkFun

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up blue! So now you can get visual feedback, or light up your project. These have a 12mm body a...

SKU: SF-COM-10442 | Brand: SparkFun

A tactile push button with a built-in red LED, combining momentary switching with visual feedback in a single component. Press the button and it lights up red — ideal for control panels, interactive projects, and anyw...

SKU: SF-COM-10440 | Brand: SparkFun

This is a simple LED-illuminated tactile button with a green cap. It’s just like a basic tactile button, but it lights up green! So now you can get visual feedback, or light up your project. These have a 12mm body and...

SKU: AF-591 | Brand: Adafruit

The Adafruit Perma-Proto Super Pack includes 9 high-quality prototyping PCBs — three of each size — so you always have the right board for whatever you're working on. Each board features through-plated, gold-finished ...

SKU: SF-COM-10439 | Brand: SparkFun

This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up white! So now you can get visual feedback, or light up your project. These have a 12mm body and...

SKU: AF-3356 | Brand: Adafruit

The Adafruit Animated Eyes Bonnet (also known as the Snake Eyes Bonnet) is a Raspberry Pi accessory for driving two 128×128 pixel OLED or TFT LCD displays along with four analog sensor inputs. It's designed for creati...

SKU: SF-SEN-12787 | Brand: SparkFun

This is the SparkFun RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and...

SKU: AF-610 | Brand: Adafruit

A panel-mount DC barrel jack that accepts standard 2.1 mm power plugs. The extra-long threaded body fits panels up to 8 mm thick (5/16″), making it suitable for wooden enclosures and thicker project boxes — not just s...

SKU: AF-618 | Brand: Adafruit

A compact 1.8" TFT display with true 18-bit colour (262,144 shades) and 160 × 128 resolution. It uses a simple SPI interface requiring only 4–5 digital pins and features two white LED backlights running on 3.3 V. Driv...

SKU: SF-TOL-10326 | Brand: SparkFun

The Heaterizer XL-3000 is a compact 300W heat gun suitable for heat-shrink tubing, basic plastic forming, and low-temperature PCB rework. It heats up quickly and is sized conveniently for bench work and electronics us...

SKU: AF-1853 | Brand: Adafruit

The Small 1.2" (30 mm) 8x8 Bright Square LED Matrix + Backpack combines a vivid blue LED matrix with an I2C backpack driver board, making it simple to add a compact display to any microcontroller project without compl...

SKU: SF-PRT-12748 | Brand: SparkFun

A standard SMD (surface-mount) DC barrel power jack for use with common DC wall adapters. This is the same connector size used on most Arduino boards and many other development platforms. Key Features Surface-Mount...

SKU: AF-1854 | Brand: Adafruit

What's better than a single LED? Lots of LEDs! Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a ma...

SKU: AF-642 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: AF-1855 | Brand: Adafruit

What's better than a single LED? Lots of LEDs! Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a ma...