Brands

SKU: SF-GPS-17519 | Brand: SparkFun

Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the s...

SKU: SF-DEV-16832 | Brand: SparkFun

The SparkFun OpenLog Artemis is an open source data logger that comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure, humidity, and distance sensors. All without writing a single line o...

SKU: AF-4569 | Brand: Adafruit

The Adafruit ISM330DHCX + LIS3MDL FeatherWing combines two precision ST sensors to deliver 9 degrees of freedom — accelerometer, gyroscope, and magnetometer — in the Feather form factor. Stack it onto any Feather boar...

SKU: AF-4516 | Brand: Adafruit

The Feather nRF52840 Sense takes the popular Feather nRF52840 Express and adds a suite of on-board environmental and motion sensors. It features Bluetooth Low Energy, native USB, CircuitPython and Arduino support, plu...

SKU: AF-4545 | Brand: Adafruit

This clear PVC tubing is sized to fit standard small submersible pumps, with an 8 mm inner diameter that provides a snug, secure connection. It's easy to cut to length and flexible enough to route through tight spaces...

SKU: EC-RPD12028K | Brand: Elecrow

If you have been wanting to dive into the world of Raspberry Pi but didn’t know where to start, this kit will certainly get your feet wet. It has lots of crowtail sensors and some necessary modules like leds and motor...

SKU: PR-PIM483 | Brand: Little Bird

Plug Pirate Audio Line-out for Raspberry Pi into your hi-fi amp or powered speakers, then sit back, relax, and soak in the rich, digital audio. It has a high-quality I2S DAC, high-res colou...

SKU: DF-KIT0157 | Brand: DFRobot

The Maixduino AI Development Kit combines the Kendryte K210 RISC-V dual-core AI processor with an ESP32 module for Wi-Fi and Bluetooth connectivity, all in an Arduino UNO-compatible form factor. The K210 features a bu...

SKU: AF-2770 | Brand: Adafruit

The 2.8" TFT Display is a bare LCD module with a capacitive single-touch touchscreen. Featuring 240×320 resolution with individual RGB pixel control and a bright 4-LED backlight, it delivers vivid full-colour output f...

SKU: AF-4300 | Brand: Adafruit

The Adafruit HalloWing M4 Express is a skull-shaped development board powered by the ATSAMD51G18 — a 120 MHz Cortex M4 processor with 512 KB Flash and 192 KB RAM. Featuring a 1.54" IPS TFT display (240×240 pixels), a ...

SKU: AF-4304 | Brand: Adafruit

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper cables have a premium ...

SKU: YH-TINYBIT | Brand: Little Bird

Tiny:bit is a robotic car for the micro:bit education market. It is compact, easy to assemble, and easy to move in tight spaces. The Tiny:bit smart car is based on the micro:bit development board design and uses the o...

SKU: AF-4182 | Brand: Adafruit

A 3.5 mm mono audio jack cable with alligator clips on the other end, making it easy to clip onto development boards like the BBC micro:bit or Adafruit Circuit Playground. Also compatible with AT (accessibility techno...

SKU: LB-24MICRO-NO-BIT | Brand: Little Bird

NEW VERSION!This kit has been discontinued but we have a new version for the Micro:bit V2Why not learn how to use the micro:bit in bite-sized chunks this year using the all-new  Little Bird Micro:bit 24 project ...

SKU: DF-SEN0265 | Brand: DFRobot

The Pixy2 (CMUcam5) is a fast, compact vision sensor for robotics that can detect objects, track colours, follow lines, and read small barcodes — all at 60 frames per second. Teach it to recognise objects by pressing ...

SKU: PI-COM0621 | Brand: Pimoroni

These bright white LED panels are the same sort used in backlights for LCD displays, usually tucked just behind the display. The LEDs are encased in acrylic to produce a beautifully even light, and there's a foil refl...

SKU: PI-CAB1100 | Brand: Pimoroni

Power your Pi with a wide range of input voltages from 3 to 16V!If you need a longer power cable to go with your Wide Input SHIM this is the product for you. This is a  1.5m long 3.5mm OD male to tinned wires cable.

SKU: PI-COM0403 | Brand: Pimoroni

  Need the Datasheet?  12mm is Here. 6mm is Here. And the 3mm is Here.

SKU: PI-SH-1025 | Brand: Pimoroni

Soldering irons work best if they're clean!This tip cleaner, made of low abrasive brass shavings, won't drop your irons temperature like normal sponges or damage the tip.With an anti-slip pad on the base it won't move...

SKU: LB-LR0347A | Brand: Little Bird

This E-Textiles  Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on ...