Brands

SKU: AF-1487 | Brand: Adafruit

Put on your sunglasses before wiring up this LED matrix — 64 eye-blistering RGB LEDs adorn the NeoPixel NeoMatrix for a blast of configurable colour. Arranged in an 8×8 matrix, each pixel is individually addressable w...

SKU: PL-2851 | Brand: Pololu

The Pololu D24V50F5 is a high-efficiency step-down (buck) voltage regulator that converts input voltages up to 38V down to a fixed 5V output. With a typical maximum output current of 5A and efficiency between 85% and ...

SKU: AF-2243 | Brand: Adafruit

A short-profile 2×20 female through-hole header for connecting Raspberry Pi HATs with minimal height above the board. This custom header provides a slimmer fit than standard-height GPIO headers, ideal for compact encl...

SKU: AF-2239 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (60 LED/m, black flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing r...

SKU: PL-2692 | Brand: Pololu

This ball caster is an improved version of our original Pololu Ball Caster with 1″ Plastic Ball; we recommend this new version over the older version for all applications that are not somehow specifically tied to the ...

SKU: AF-154 | Brand: Adafruit

This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different h...

SKU: AF-2561 | Brand: Adafruit

Everything you need to get started with NeoPixel LED strips in one convenient pack. Includes a 1-metre NeoPixel strip with white flex PCB, power supply, and connectors — just add a microcontroller and you're ready to ...

SKU: AF-2298 | Brand: Adafruit

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and ...

SKU: AF-2744 | Brand: Adafruit

We're keepin' it wheel with this one! Need a great drive solution for your little robotic friends? This black plastic Micro Continuos Rotation Servo Wheel is equipped with a silicone t...

SKU: SF-SEN-08679 | Brand: SparkFun

A thin, flexible membrane potentiometer that senses finger or stylus position along a 200 mm strip. Pressing anywhere on the strip varies resistance linearly from 100 Ω to 10 kΩ, providing accurate positional data for...

SKU: SF-KIT-13927 | Brand: SparkFun

The LilyPad Sewable Electronics Kit is an introduction to the world of e-textiles and electronic sewing. Through a series of guided projects, you'll learn to sew basic circuits, light up LEDs, control them with button...

SKU: SF-DEV-13902 | Brand: SparkFun

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-t...

SKU: PL-1131 | Brand: Pololu

This small digital distance sensor detects objects between 0.5 cm and 5 cm (0.2″ and 2″) away. With its quick response time, small size, low current draw, and short minimum sensing distance, this sensor is a...

SKU: PL-1105 | Brand: Pololu

A powerful brushed DC motor with a 70:1 metal gearbox, designed for operation at 12V. The unit features a 16mm-long, 6mm-diameter D-shaped output shaft, suitable for robotics and mechanical projects requiring high tor...

SKU: SF-WRL-11373 | Brand: SparkFun

The SparkFun XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that ...

SKU: PL-2098 | Brand: Pololu

The Pololu D24V3F5 is a compact buck (step-down) switching voltage regulator that converts input voltages up to 42 V down to a fixed 5 V output. With a typical efficiency of 80–90%, it significantly outperforms linear...

SKU: SF-DEV-13298 | Brand: SparkFun

The Touch Board from Bare Conductive is an easy-to-use Arduino@Heart board that gives you the ability to turn almost any material or surface into a sensor. Each Touch Board offers 12 electrodes for your a conductiv...

SKU: SF-COM-13253 | Brand: SparkFun

This is a single pole, 10 position rotary switch able to select up to 10 different states in a durable package. Unlike our other rotary switch, this model is much more robust and capable of handling larger currents...

SKU: PL-1964 | Brand: Pololu

This #4-40, pan-head screw is 1 1/4″ (1.25″) long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-1952 | Brand: Pololu

Hexagonal male-female aluminium standoffs designed specifically for the Raspberry Pi. The 11mm spacing is the ideal height for mounting expansion boards with standard-size female headers, and the M2.5 threads fit the ...