Brands

SKU: AF-3089 | Brand: Adafruit

The Adafruit 14-Segment Alphanumeric LED FeatherWing adds a bright 4-digit alphanumeric display to any Feather board. The 0.56" 14-segment LEDs can display the full alphabet, numbers, and punctuation — readable from u...

SKU: AF-167 | Brand: Adafruit

Plastic wheel with a cutout specially designed to allow attachment to our larger continuous rotation servo. Makes it easy to get your robot rolling. Each wheel comes with a rubber tire that is quite sturdy. To...

SKU: AF-173 | Brand: Adafruit

The "poor man's" accelerometer! Tilt sensors are switches that can detect basic motion/orientation. The metal tube has a little metal ball that rolls around in it, when its tilted upright, the ball rolls onto the cont...

SKU: SF-GPS-13670 | Brand: SparkFun

The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim de...

SKU: AF-3090 | Brand: Adafruit

Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just tw...

SKU: SF-SEN-11446 | Brand: SparkFun

A breakout board for the Analog Devices ADXL362, a 3-axis MEMS accelerometer that operates at ultra-low power consumption. It measures both dynamic acceleration (motion, shock) and static acceleration (tilt), and comm...

SKU: SF-DEV-13664 | Brand: SparkFun

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Mini Breakout is a great landing spot. The SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSA...

SKU: AF-3097 | Brand: Adafruit

Looking to improve the printing bed on your Flashforge Creator Pro? Check out the PRINTinZ Skin for Flashforge! The PRINTinZ Skin is a peel and stick surface for 3D printer beds made from the sam...

SKU: PL-1100 | Brand: Pololu

A Pololu micro metal gearmotor with a 5:1 gear ratio and low-power (LP) 6V motor. The LP motor variant uses precious metal brushes and draws the least current of the micro metal gearmotor family, making it well-suited...

SKU: SF-COM-13639 | Brand: SparkFun

A pack of two SPDT mini microswitches with a small push-button actuator. These 3-terminal switches have a tactile click and are commonly used as limit switches in 3D printers, sliders, and robot projects. Specificati...

SKU: DF-FIT0356 | Brand: DFRobot

A 1-metre weatherproof digitally addressable RGB LED strip with 60 WS2812 LEDs. Each LED is individually controllable via a single data line, supporting 256 brightness levels per channel and over 16 million colours. T...

SKU: SF-DEV-13629 | Brand: SparkFun

This is the SparkFun Photon IMU Shield, a versatile motion-sensing add-on board for your Photon device. Each IMU shield is equipped with an on-board LSM9DS1 system-in-a-chip that houses a 3-axis accelerometer, 3-axis ...

SKU: DF-DFR0285 | Brand: DFRobot

The Beetle shield is designed to attach a Beetle (DFR0282) controller for easy connecting servos and sensors. ​ SPECIFICATIONS Operating voltage: 3 - 5V Compatible with DFRobot Beetle ...

SKU: SF-DEV-13628 | Brand: SparkFun

The SparkFun Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceiving...

SKU: AF-206 | Brand: Adafruit

A 150mm (6″) jumper cable with 6 conductors at 0.1″ (2.54mm) spacing. Features female socket connectors on both ends for quick plug-in connections to header pins. Key Features Socket-to-Socket – Female connectors o...

SKU: SF-LCD-11377 | Brand: SparkFun

The µLCD-144-G2 (GFX) is a compact 1.44" colour LCD module with an embedded GOLDELOX-GFX2 graphics processor. It delivers standalone graphics capability — draw lines, circles, text, display images, animations, and vid...

SKU: SF-DEV-13614 | Brand: SparkFun

The Qduino Mini is a compact, Arduino-compatible development board with built-in LiPo battery charging and a fuel gauge for monitoring battery level. Based on the ATmega32U4, it runs at 3.3V/8 MHz and measures just 2 ...

SKU: SF-PRT-13612 | Brand: SparkFun

This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB. This little connector is actually the exact part we recommend using with our SparkFun Th...

SKU: AF-249 | Brand: Adafruit

This pack includes everything you need to build a light and temperature data logger with an Arduino. The Adafruit data logger shield records sensor readings to an SD card with real-time timestamps, while the included ...

SKU: SF-SEN-13582 | Brand: SparkFun

The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital bits! We have designed the SparkFun Line Follower Arrays to follow a dark line of about ¾ in...