Brands

SKU: SS-110060062 | Brand: Seeed Studio

The AllPixel PowerTap is a tiny accessory board (under 1" square) that simplifies power injection on long runs of LEDs. When running long LED strips, voltage drops can cause dimming and colour inconsistency — the Powe...

SKU: SF-COM-10246 | Brand: SparkFun

The FreeM is a wireless infrared controller and power supply for BlinkM smart LEDs, enabling completely standalone deployment without physical wiring. When paired with a CtrlM transmitter, it creates an invisible, low...

SKU: AF-1651 | Brand: Adafruit

The 2.8" TFT Touch Shield with Resistive Touch Screen plugs directly into any Arduino UNO or Mega-shaped board, providing a bright, full-colour display with touch input and an onboard MicroSD card socket. Fully assemb...

SKU: AF-1624 | Brand: Adafruit

A compact 8×8 pure green LED matrix in a 20 × 20 mm (0.8″) package. With 64 LEDs, 16 pins (8 per side), and standard 2.54 mm (0.1″) pin spacing, it plugs directly into a breadboard with room to spare for wiring. This...

SKU: TB-LO1238 | Brand: Little Bird

L15 ferrite toroid cores suitable for winding custom transformers, inductors, and chokes. Commonly used for RF suppression and applications requiring compact reactive components. Specifications Material – L15 ferri...

SKU: AF-1623 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded pure green LED matrix. Only 1.2" on a side, it is quite visible but not so large it wont plug into a breadboard! There are 16 pins on the side, ...

SKU: SF-COM-11041 | Brand: SparkFun

A bare PCB for building a relay control circuit, based on SparkFun's Controllable Power Outlet tutorial. It allows you to switch high-voltage loads using a simple 0–5V GPIO signal from any microcontroller. Components ...

SKU: AF-1644 | Brand: Adafruit

These nylon clips will let you attach our flexible NeoPixel strips to a wall, moulding, or project. Just side the rubber tubing thru so that the clips are in between two LEDs. Comes in a pack of 5.

SKU: SF-COM-00538 | Brand: SparkFun

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.

SKU: AF-1633 | Brand: Adafruit

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright pure green dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA an...

SKU: AF-3630 | Brand: Adafruit

Stranded NeoPixel dots are perfect for adding individual points of colour to costumes, wearables, and decorations without the rigidity of a PCB strip. Each strand contains 20 individually addressable NeoPixel LEDs enc...

SKU: AF-3636 | Brand: Adafruit

A side-emitting NeoPixel strip with 60 individually addressable RGB LEDs per metre on a flexible black PCB. Unlike standard NeoPixel strips that emit light upward, these side-light LEDs emit at 90 degrees — perfect fo...

SKU: SF-COM-00682 | Brand: SparkFun

LED Matrix with Bright-Red and Bright-Green LEDs. This medium matrix has 64 Red/Green LEDs built into one common cathode housing. Unit comes with a black finish and a opaque LED lenses. Features: 0.33 x 2 x 2" ...

SKU: SF-COM-08973 | Brand: SparkFun

A 14-pin ZIF connector designed for use with sealed membrane keypads. The right-angle SMD package with 1 mm pitch allows for a low-profile, surface-mount connection to membrane switch assemblies. Specifications Pin...

SKU: SF-COM-08236 | Brand: SparkFun

This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down sel...

SKU: SF-COM-00588 | Brand: SparkFun

The IMD2AT108 is a complementary NPN/PNP transistor array IC that integrates two transistors, two base resistors, and two pull-up resistors into a single Mini6 package (similar to SOT-457). Commonly used for level tra...

SKU: SF-CAB-14303 | Brand: SparkFun

A 10-pack of cables with an alligator clip on one end and a bare hookup pigtail (male pin) on the other. These cables make it easy to connect alligator clips directly into breadboards, development boards, and any stan...

SKU: SF-BOB-11040 | Brand: SparkFun

The SparkFun LED RingCoder Breakout provides a visual position indicator for rotary encoders. Two 8-bit shift registers drive a circular LED bargraph that displays the virtual position of the encoder as it turns, givi...

SKU: AF-1673 | Brand: Adafruit

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our 1.27" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. ...

SKU: AF-1660 | Brand: Adafruit

Add tons of storage to your next project with this micro SD card socket. We use this part in all our designs and it works great with any microSD ('transflash') of any storage size. It's a surface-mount part and the pi...