Brands

SKU: PT-AUX-USBC | Brand: Little Bird

Introducing our cutting-edge USB Type C Headphone Jack Adapter! This innovative audio adapter allows you to easily connect your favorite headphones to any device with a USB-C port. Say goodbye to the hassle of carryin...

SKU: AF-5768 | Brand: Adafruit

The Adafruit RP2040 Prop-Maker Feather is an all-in-one board designed for building props, cosplay pieces, lightsabers, animatronics, and interactive toys. It combines the RP2040 microcontroller with a prop-making too...

SKU: LB-LR0214-110A | Brand: Little Bird

Raspberry Pi 8 channel Level Switching (3.5V to 5V) IO Module Logic Level Converter is able to convert signals from 5V down to 3.3V (and vice versa) meaning you can safely use 5V or 3.3V devices with the Raspberry ...

SKU: LB-EAGLED-LED-O | Brand: Little Bird

EagLED LEDs are purpose-built for e-textiles and wearable projects. This pack of 10 orange sewable LEDs come attached to each other on a snappable strip — simply break them apart as needed and sew them into clothing, ...

SKU: LB-PT-LOOP | Brand: Little Bird

Contains1 x Cable with 5.2mm ring3 x Screws3 x Nuts

SKU: DF-FIT0871 | Brand: DFRobot

The Argon ONE M.2 is a premium aluminium alloy case for the Raspberry Pi 4B, featuring an M.2 SATA SSD expansion slot for faster boot times and larger storage. With its Space Grey finish, full-size dual HDMI output, a...

SKU: AF-5100 | Brand: Adafruit

The Adafruit MACROPAD RP2040 Bare Bones is a programmable 3×4 macro keyboard powered by the Raspberry Pi RP2040 microcontroller. It comes with a 128×64 OLED display, rotary encoder with push-button, speaker, and 12 Ne...

SKU: SF-BOB-18012 | Brand: SparkFun

Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to boards that have only one Qwiic port on the I2C bus. O...

SKU: SF-PRT-17912 | Brand: SparkFun

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. The cable insulation is made from a highly malleable material maki...

SKU: EF-EF08256 | Brand: ElecFreaks

The micro:bit Smart Health Kit has a well-selection of the Sensor:bit, Analog UV Sensor, PIR Sensor, MQ3 Alcoholic Sensor Brick, Servo and etc., we could use it to build such themes as the UV light detections, the ...

SKU: LB-LS1697 | Brand: Little Bird

This is the Light and Colour Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and colour measuring, proximity detection, and touch-less gesture sensing. With this Light...

SKU: SF-WRL-17841 | Brand: SparkFun

A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connect...

SKU: EC-ASW51001E | Brand: Elecrow

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up...

SKU: EC-ACC05010A | Brand: Elecrow

This 1.5-meter-long wire will perfectly match the input port of your raspberry pi 4! Support transfer 720P/1080i/1080P Full HD 4K 60Hz high-definition video.High-quality material, 24K gold-plated connector, strong cor...

SKU: LB-CTC-CAPS | Brand: Little Bird

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers.  The Crack the Code shield uses these on the buzzer module.  These little j...

SKU: AF-3870 | Brand: Adafruit

A compact push-button toggle switch — press once to turn on, press again to turn off. Often called a "flashlight switch" due to its common use in small torches, this latching switch is ideal as a power switch or mode ...

SKU: DF-SEN0236 | Brand: DFRobot

BME280 is an environmental sensor that integrates onboard temperature sensor, humidity sensor and barometer. The sensor is of high precision, multiple functions, and small size etc. It provides both SPI and I2C in...

SKU: SF-PRT-14492 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters....

SKU: PR-PIM269 | Brand: Little Bird

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare ...

SKU: AF-1063 | Brand: Adafruit

A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully ass...