NEO-D9S GNSS Correction Data Receiver with Qwiic
SKU: SF-GPS-19390 | Brand: SparkFun
This NEO-D9S breakout is an L-Band satellite correction data receiver designed to feed correction streams to a compatible multi-band, high-precision GNSS receiver such as the u-blox ZED-F9P. With a clear view of the s...
Delivered by Wed 2 Dec
Artemis Global Tracker Satellite GNSS Board
SKU: SF-WRL-18712 | Brand: SparkFun
Built for field deployments well beyond WiFi and mobile coverage, this compact tracker combines an Iridium 9603N Short Burst Data modem with the Arduino-compatible Artemis module. It can send and receive short satelli...
Delivered by Wed 2 Dec
GNSS Flex pHAT with LG290P RTK & IM19 IMU
SKU: SF-GPS-29891 | Brand: SparkFun
Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level posit...
Delivered by Wed 2 Dec
GNSS Flex Breakout Carrier Board
SKU: SF-GPS-28962 | Brand: SparkFun
This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. Th...
Delivered by Wed 2 Dec
Allband GNSS RTK Breakout - mosaic-G5 P3
SKU: SF-GPS-29208 | Brand: SparkFun
Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the...
Delivered by Wed 2 Dec
Qwiic Alphanumeric Display - Red
SKU: SF-COM-16916 | Brand: SparkFun
Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without sol...
Delivered by Wed 2 Dec
Qwiic Alphanumeric Display - White
SKU: SF-COM-18565 | Brand: SparkFun
This compact white alphanumeric display gives you fourteen-segment characters for showing numbers, letters and symbols in your project. It uses the VK16K33 LED driver over I2C, so it is a neat fit for Qwiic-based buil...
Delivered by Wed 2 Dec
Qwiic Power Switch
SKU: SF-PRT-26784 | Brand: SparkFun
This compact Qwiic board lets you switch power to downstream Qwiic devices so high-current modules can be turned off when they are not needed. That can help conserve energy in battery-powered builds using GNSS and oth...
Delivered by Wed 2 Dec
Qwiic Soil Moisture Sensor
SKU: SF-SEN-24409 | Brand: SparkFun
This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...
Delivered by Wed 2 Dec
Red Vision HM01B0 Camera and Touch Display Kit for RedBoard
SKU: SF-KIT-30216 | Brand: SparkFun
Add camera input and a capacitive touchscreen to an RP2350 RedBoard IoT for machine-vision projects. This kit combines the Red Vision Touch Display for RedBoard with the Red Vision Camera Board - HM01B0 (Color), and i...
Delivered by Wed 2 Dec
Qwiic OLED Display - 1.5in 128x128
SKU: SF-LCD-29530 | Brand: SparkFun
This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and ...
Delivered by Wed 2 Dec
Qwiic Relay - 1x1A DPDT
SKU: SF-COM-30416 | Brand: SparkFun
Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at...
Delivered by Wed 2 Dec
Gravity Factory-Calibrated Laser Methane CH4 Sensor
SKU: DF-SEN0654 | Brand: DFRobot
This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas s...
Delivered by Wed 2 Dec
Gravity GP8600 1-Channel I2C/PWM 16-bit DAC Module
SKU: DF-DFR1229 | Brand: DFRobot
This GP8600 module is a high-precision digital-to-analogue converter for connecting logic-level microcontrollers to industrial-style analogue control inputs. It accepts I2C or PWM signals and converts them for applica...
Delivered by Wed 2 Dec
DFRobot GP8630N 16-bit I2C/PWM to ±10V & 4-20mA DAC Module
SKU: DF-DFR1230 | Brand: DFRobot
This Gravity DAC module converts I2C or PWM digital signals into stable analogue voltage or current outputs for control and automation projects. Built around the GP8630N chip, it supports output modes such as ±10V, 0-...
Delivered by Wed 2 Dec
Gravity BMP585 Barometric Pressure & Temperature Sensor (I2C/UART)
SKU: DF-SEN0664 | Brand: DFRobot
Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...
Delivered by Wed 2 Dec
Gravity 3-Pin PH2.0 to DuPont Male Cable Pack 30cm
SKU: DF-FIT0897 | Brand: DFRobot
This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making th...
Delivered by Wed 2 Dec
Gravity LED Button for Arduino and micro:bit - Red
SKU: DF-DFR0785-R | Brand: DFRobot
This compact illuminated push-button module is designed for interactive electronics and quick prototyping. A transparent cap sits over an internal red LED, giving instant visual feedback when the button is pressed.The...
Delivered by Wed 2 Dec
DFRobot Gravity LED Switch Module - Green
SKU: DF-DFR0789-G | Brand: DFRobot
This compact illuminated push-button module combines a tactile switch with a built-in green LED indicator, making it handy for interactive electronics, control panels and classroom builds.It uses a self-locking toggle...
Delivered by Wed 2 Dec
Gravity LED Self-Locking Switch - Red
SKU: DF-DFR0789-R | Brand: DFRobot
This illuminated pushbutton module is a simple self-locking switch with a built-in red LED for clear visual feedback. Press it once and the module outputs High while the LED turns on; press it again and the output goe...
Delivered by Wed 2 Dec
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared