Brands

SKU: AF-2846 | Brand: Adafruit

Add individually addressable RGB plus white lighting to your project with this flexible NeoPixel strip. Each pixel contains red, green, blue and white LEDs, giving you colourful effects plus a dedicated white channel ...

SKU: AF-6024 | Brand: Adafruit

Add tiny points of addressable colour to costumes, props, wearables and embedded builds without fighting a fragile flexible PCB. This NeoPixel strand uses solid plated wire cords that hold their shape, making it easie...

SKU: AF-6023 | Brand: Adafruit

For wearable builds and sculptural lighting, this NeoPixel strand gives you lots of tiny RGB points without a flexible PCB to crack. Each coated NeoPixel sits on soft plastic-coated plated wire, so the strand can be s...

SKU: AF-6025 | Brand: Adafruit

Add tiny dots of colour to costumes, props, wearables and embedded builds without the stiffness of a normal flexible PCB strip. This NeoPixel strand uses solid plated wire that holds its shape, making it easier to sew...

SKU: AF-6026 | Brand: Adafruit

This strand puts tiny NeoPixel “pebbles” or “seeds” along solid plated wires, making it easier to add dots of colour to costumes, props, wearables and embedded structures than a flexible PCB strip that can crack when ...

SKU: SF-LCD-29766 | Brand: SparkFun

Add a bright 2.8-inch colour display to your Raspberry Pi Pico project with this Pimoroni display pack. It uses a 320×240 pixel IPS LCD driven by an ST7789V controller, giving you a generous active screen area for men...

SKU: AF-5807 | Brand: Adafruit

This breakout is built around the HUSB238 USB PD sink chip, making it easy to negotiate power from a USB Type-C Power Delivery source without soldering tiny resistors. It plugs into a USB-C cable and uses the CC lines...

SKU: AF-6365 | Brand: Adafruit

This compact breakout adds a 4-pin JST SH connector to a Raspberry Pi or compatible board, giving you a quick STEMMA QT/Qwiic connection for I2C sensors and devices. The 2x3 socket plugs onto the Pi’s I2C and power pi...

SKU: AF-5808 | Brand: Adafruit

This square TFT module is made for advanced display projects that need a high-resolution, compact screen. It has a 3.4 inch IPS panel with 480x480 full-colour pixels, giving a crisp square format with good colour visi...

SKU: AF-5825 | Brand: Adafruit

This square TFT module is for advanced display projects that need a high-resolution, 3.4 inch IPS panel with a 480 x 480 pixel layout. It delivers 16-bit full-colour output and wide off-axis viewing, making it a neat ...

SKU: AF-764 | Brand: Adafruit

Circuit Playground Bluefruit is a round, beginner-friendly electronics and programming board with Bluetooth® Low Energy built in. It builds on the Circuit Playground Express concept with a more powerful nRF52840 micro...

SKU: WS-31284 | Brand: Waveshare

Built around the ESP32-S3 dual-core processor, this industrial relay module brings local control, networking and edge automation into one DIN-rail friendly unit. It combines 8 relay outputs, 8 digital inputs, isolated...

SKU: DF-SEN0693 | Brand: DFRobot

Built around the Bosch BMI323, this compact Fermion module combines a 3-axis accelerometer and a 3-axis gyroscope on a 16 mm × 16 mm board. It provides high-rate acceleration and angular velocity data over I²C for emb...

SKU: AF-6490 | Brand: Adafruit

This breakout carries the TMAG5273 A2, a low-power linear 3D Hall-effect sensor for measuring magnetic fields across the X, Y and Z axes. Its built-in 12-bit ADC provides axis readings over I2C, and there is also an i...

SKU: AF-5893 | Brand: Adafruit

This compact USB serial UPDI programmer is made for programming modern ATtiny chips, including parts used on Adafruit seesaw boards such as the ATtiny816, ATtiny817 and ATtiny1616. It provides selectable 3V or 5V powe...

SKU: AF-5806 | Brand: Adafruit

This round TFT module is aimed at advanced display projects that need a compact circular screen with plenty of pixels. The 2.1" diagonal IPS panel provides 480x480 16-bit full-colour output, with good colour visibilit...

SKU: AF-6137 | Brand: Adafruit

Add a tiny strip of glowing neon-style light to miniatures, props, costumes and displays with this flexible LED filament. It is made from dozens of micro LED diodes bonded to an ultra-flexible metal backing, then coat...