Brands

SKU: DF-SEN0185 | Brand: DFRobot

INTRODUCTION what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right! This Hall sensor knows whether there is a magne...

SKU: DF-SEN0186 | Brand: DFRobot

INTRODUCTION  Ever want to build your own weather station? This iot weather station kit includess anemometer, wind vane and rain bucket. The serial communication method provides good compatibility and ma...

SKU: DF-DFR0369 | Brand: DFRobot

This 4.3-inch e-ink display module from DFRobot supports 800×600 resolution and communicates via serial (UART), making it straightforward to integrate with microcontrollers. It features built-in Chinese and English fo...

SKU: AF-3305 | Brand: Adafruit

The Adafruit TFT 50-Pin to 40-Pin + AR1100 Touchscreen Adapter converts Adafruit RTD266X driver boards with 50-pin TFT connectors to work with 40-pin TFT displays. It also includes a built-in AR1100 resistive touch co...

SKU: SF-BOB-10616 | Brand: SparkFun

The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of thi...

SKU: DF-DFR0373 | Brand: DFRobot

The Particle Photon is a compact WiFi development board for building connected Internet of Things (IoT) projects and products. Powered by a Broadcom BCM43362 WiFi chip and an STM32F205 ARM Cortex M3 microcontroller ru...

SKU: SF-SEN-12909 | Brand: SparkFun

This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes ai...

SKU: SF-COM-10594 | Brand: SparkFun

Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or...

SKU: DF-DFR0310 | Brand: DFRobot

Time to upgrade! This is a upper deck PCB for the 2WD MiniQ Robot Chassis. It is compatible with 9g micro servo and URM ultrasonic mounting bracket. With this upper deck you can upgrade the MiniQ with more senso...

SKU: AF-445 | Brand: Adafruit

EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...

SKU: DF-FIT0419 | Brand: DFRobot

INTRODUCTION This is a new micro DC geared motor, using planetary gear mechanism, applicable to the various types of DIY project. Especially the project which has a certain requirements for ...

SKU: SF-PRT-12885 | Brand: SparkFun

This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel ...

SKU: AF-447 | Brand: Adafruit

EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...

SKU: AF-3337 | Brand: Adafruit

Learning to invent is fast and fun with no code-typing or circuit-soldering to slow things down. The BlocklyProp Starter Kit has all the hardware required to fully learn the Parallax’s Blockly visual programming to...

SKU: SF-WRL-10534 | Brand: SparkFun

A simple 434 MHz ASK RF transmitter module for creating basic one-way wireless data links. Breadboard-friendly and easy to pair with a microcontroller, this transmitter works with compatible 434 MHz receiver modules t...

SKU: SF-WRL-10532 | Brand: SparkFun

The RF Link Receiver is a simple 434 MHz wireless receiver module designed for one-way data communication with a compatible 434 MHz transmitter. It fits easily into a breadboard and pairs with microcontrollers to crea...

SKU: SF-TOL-12878 | Brand: SparkFun

This is 50g of high quality, Lead-Free Solder Paste, the perfect amount to keep around for prototyping and hobby projects that require a bit of SMD soldering. Solder Paste Stenciling is the easiest and quickest way t...

SKU: AF-3354 | Brand: Adafruit

The Rainbow HAT from Pimoroni has a buffet of sensors, inputs, and displays to explore Android Things™. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things.Pimoroni collab...

SKU: AF-3341 | Brand: Adafruit

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of the ones in our digital DotStart strips and matrices wi...

SKU: SF-WRL-12861 | Brand: SparkFun

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough...