Brands

SKU: SF-LAB-17363 | Brand: SparkFun

The SparkFun Inventor's Kit for micro:bit v2 Lab Pack includes 10 complete micro:bit v2 Inventor's Kits, an SIK Refill Pack and 25 AAA-sized batteries to get your students started in the world of electronics. The SIKs...

SKU: SF-DEV-16401 | Brand: SparkFun

Leveraging the ultra powerful Artemis Module, the SparkFun MicroMod Artemis Processor is the brain board of your dreams. With a Cortex-M4F with BLE 5.0 running up to 96MHz and with as low power as 6uA per MHz (less th...

SKU: SF-DEV-16791 | Brand: SparkFun

With a 32-bit ARM Cortex-M4F MCU, the SparkFun MicroMod SAMD51 Processor Board is one powerful microcontroller packaged on a small board! The provides you with an economical and easy to use development platform if ...

SKU: SF-DEV-16400 | Brand: SparkFun

The MicroMod Machine Learning Carrier Board combines some of the features of our SparkFun Edge Board and SparkFun Artemis boards, but allows you the freedom to explore with any processor in the MicroMod lineup without...

SKU: SF-KIT-17362 | Brand: SparkFun

The SparkFun Inventor’s Kit (SIK) for micro:bit v2 is a great way to get creative, connected and coding with the micro:bit. The SIK for micro:bit v2 provides not only the micro:bit v2 board but everything you need to ...

SKU: SF-SEN-17050 | Brand: SparkFun

The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by method of cycling high and low tem...

SKU: SF-LAB-17361 | Brand: SparkFun

The micro:bit v2 Educator's Lab Pack includes 10 micro:bit v2 boards and everything you need to get you started with the new learning platform. The Lab Pack has everything you need, including micro:bits, cables, batte...

SKU: SF-PRT-17253 | Brand: SparkFun

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40, right angle, SMD pins. Add this part to your board to create a handy...

SKU: SF-SEN-17049 | Brand: SparkFun

The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's wid...

SKU: SF-SEN-17052 | Brand: SparkFun

The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When H₂S gas exists, the sensor’s conductivity gets higher ...

SKU: SF-SEN-17053 | Brand: SparkFun

The MQ-137 is an ammonia (NH3) gas sensor from Winsen, designed to detect ammonia concentrations in the air. The sensing element is tin dioxide (SnO2), which has lower conductivity in clean air and increases in conduc...

SKU: SF-COM-16810 | Brand: SparkFun

The SparkFun Qwiic Dual Solid State Relay is a power delivery board that allows users to switch two AC loads from a low power microcontroller using the SparkFun Qwiic connect system. The board features two 25A/250VAC ...

SKU: EC-SEA0002T | Brand: Elecrow

The Crowtail Advanced Kit for Arduino is a comprehensive STEAM education kit containing 22 electronic modules and a Crowduino Uno SD board. With plug-and-play Crowtail connectors, no soldering or complex wiring is req...

SKU: SF-DEV-17360 | Brand: SparkFun

The Raspberry Pi Compute Module 4 I/O board is the perfect compliment to get you started working the Compute Module 4 line. The Compute Module plugs right into the I/O Board and provides a multitude of inputs and outp...

SKU: EC-CRT12036K | Brand: Elecrow

The IOT kit will supply you with Crowtail modules, which inclueds ESP8266 NodeMCU, OLED, RGB LED, Moisture sensor, Temperature & Humidity sensor, Flame sensor, Buzzer and Relay. This kit comes from our Philippine cust...

SKU: DF-SER0053 | Brand: DFRobot

A 9g micro servo with 300° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch...

SKU: DF-SER0050 | Brand: DFRobot

The DFRobot 2Kg 180° Clutch Servo features built-in clutch protection and electronic overload protection, making it ideal for robotics and model applications where servos may encounter external forces or stalling. Wh...

SKU: SF-DEV-17119 | Brand: SparkFun

The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teen...

SKU: DF-DFR0722 | Brand: DFRobot

The 8421 Encoder (Horizontal) is an absolute position encoder with 16 positions (0–F) using BCD/8421 encoding. Unlike incremental encoders or potentiometers, the mechanical position directly determines the output code...

SKU: DF-DFR0665 | Brand: DFRobot

The 2.8" IPS TFT LCD Touchscreen is a full-colour display module with integrated resistive touch and a MicroSD card slot. Driven by the ILI9341 display controller and XPT2046 touch controller, it communicates over SPI...