Brands

SKU: AF-2026 | Brand: Adafruit

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 5mm pitch. Designed for indoor use with a wide 160° viewing angle and pre-balanced white output, these panels look great in ambient light. The slightly larger...

SKU: AF-2176 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a narrow bevel finish. Slot the LED through the opening, insert the plastic retaining cap, and tighten the threaded washer for a clea...

SKU: AF-2178 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a wide concave bevel finish. The concave bezel creates a recessed look around the LED, adding a polished, professional touch to panel...

SKU: AF-2177 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a wide convex bevel finish. The raised convex bezel adds a bold, dome-shaped profile around the LED, giving panels and enclosures a d...

SKU: AF-2105 | Brand: Adafruit

This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket stra...

SKU: AF-2221 | Brand: Adafruit

As of October 12th, 2015 this product now ships with an Adafruit Trinket with a micro-USB plug. One of the most popular Trinket projects now has its own kit pack!  Make your very own programmable NeoPixel gogg...

SKU: AF-2260 | Brand: Adafruit

A compact, panel-mountable 5" HDMI monitor with a built-in resistive touchscreen. Featuring the TI TFP401 DVI/HDMI decoder, this display works with any computer that has HDMI output — simply plug in and go. The resis...

SKU: AF-2258 | Brand: Adafruit

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected...

SKU: AF-2329 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (144 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing ...

SKU: AF-2238 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (30 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing r...

SKU: AF-2279 | Brand: Adafruit

The 64×32 RGB LED Matrix Panel with 3mm pitch features 2048 bright RGB LEDs in a 192×96mm panel. With tighter pixel spacing than 4mm and 5mm variants, this panel delivers sharp images for indoor viewing at moderate di...

SKU: AF-2241 | Brand: Adafruit

Adafruit DotStar LED strips use 2-wire SPI instead of the single-wire protocol used by NeoPixels, allowing much faster data rates (up to 32 MHz) and a 20 KHz PWM refresh rate. This makes DotStars ideal for persistence...

SKU: AF-1936 | Brand: Adafruit

Ladyada's R is for Robotics is an A-to-Z colouring book adventure featuring robots, their inventors, and the history of robotics. From Isaac Asimov's three laws of robotics to the Jacquard loom, each page combines art...

SKU: AF-2351 | Brand: Adafruit

These APA102 (DotStar) cool white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three cool white (~6000K) dies. The phosphor coating p...

SKU: AF-2024 | Brand: Adafruit

The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — att...

SKU: AF-2454 | Brand: Adafruit

The Adafruit DPI TFT Kippah connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. The result is a fast, native 18-bit colour display with full g...

SKU: AF-2453 | Brand: Adafruit

The Adafruit DPI TFT Kippah with Touch Support connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. This version adds resistive touchscreen cap...

SKU: AF-2432 | Brand: Adafruit

The Adafruit DotStar APA102 Cool White LED Strip (30 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consistent...

SKU: AF-2434 | Brand: Adafruit

The Adafruit DotStar APA102 Cool White LED Strip (144 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consisten...

SKU: AF-2438 | Brand: Adafruit

With this handy 7 Pin Mini-DIN Connector you can now jack into the hackport on your iRobot and control it with an Arduino or some other favorite microcontroller that has a 5V TTL UART! You can also power your proje...