Brands

SKU: AF-6101 | Brand: Adafruit

This 4cm USB-powered cooling fan provides instant airflow to prevent electronics from overheating. Simply plug it into any USB port for immediate cooling, or cut off the USB connector to wire it directly to a 5V power...

SKU: AF-6096 | Brand: Adafruit

A lightning bolt-shaped COB (Chip-on-Board) LED filament that produces a warm, uniform glow similar to classic Edison-style LED bulbs. Dozens of micro LED diodes are bonded to a rigid metal backing and coated in silic...

SKU: AF-6095 | Brand: Adafruit

This skull-shaped LED filament uses COB (Chip-on-Board) technology — dozens of micro LED diodes bonded to a rigid metal backing and coated in silicone — to produce a warm, uniform glow similar to Edison-style LED bulb...

SKU: AF-6094 | Brand: Adafruit

COB LED Unicorn – A Miniature Magical LightThis glowing unicorn is crafted from COB (Chip-on-Board) LEDs, the same technology found in Edison-style LED bulbs, arranged in a whimsical design to create a bright, warm, a...

SKU: AF-6093 | Brand: Adafruit

A decorative COB (Chip-on-Board) LED shaped like a snowflake, using the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a rigid metal backing and coated in silicone, produci...

SKU: AF-6092 | Brand: Adafruit

The Adafruit bq25185 is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 3.3V buck converter. It is an excellent upgrade from MCP73833 or MCP73831-based charge...

SKU: AF-6077 | Brand: Adafruit

If you’re looking to add a USB-C connector to your wearable tech project, check out our sewable connectors! This USB Type-C connector is mounted horizontally on a flexible, sewable base, with red and black power wires...

SKU: AF-6076 | Brand: Adafruit

If you want to add a Micro-B connector to your favorite garment for a wearable tech project, check out our sewable connectors! This Micro-B connector is mounted horizontally on a flexible, sewable base, with red and b...

SKU: AF-6073 | Brand: Adafruit

This snap-in panel mount USB cable is perfect for adding a USB host connection to your project enclosure. On one end, it features a compact USB Type-A connector designed for easy snap-in panel mounting—no screws or dr...

SKU: AF-6072 | Brand: Adafruit

A snap-in panel mount cable with a USB Type A socket on one end and bare power wires on the other. Perfect for adding a USB-A charging or power port to project enclosures without screws or drilling — just cut a rectan...

SKU: AF-6067 | Brand: Adafruit

The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...

SKU: PI-PIM728 | Brand: Pimoroni

Add smart light and sound effects to models and dioramas with this small-but-mighty RP2040-powered programmable controller board - now with wireless connectivity!Tiny FX W is an effects controller for the LED dots and...

SKU: AF-6054 | Brand: Adafruit

The Feather Mount for LEGO-Compatible Brick Systems lets you securely attach any standard-sized Feather or FeatherWing board (2" × 0.9" / 51 mm × 23 mm) to LEGO-compatible brick plates. No hot glue, epoxy, or tape nee...

SKU: AF-6062 | Brand: Adafruit

The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...

SKU: AF-6038 | Brand: Adafruit

The Adafruit SPI Flash SD Card breakout features an XTSD 2 GB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 2 GB ...

SKU: AF-6004 | Brand: Adafruit

This panel-mount USB extension cable runs a USB Type-A port through an enclosure wall. The socket end has two flexible mounting ears with pre-installed M3 screws for securing to a panel, while the plug end connects to...

SKU: AF-5994 | Brand: Adafruit

No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter cable will be able to get this-connected-to-that. It supports RS232 serial, TTL UART serial, RS485 and RS422. ...

SKU: DF-FIT1002 | Brand: DFRobot

The photonic thin-film battery is an advanced energy-harvesting solution that stands out from traditional solar cells and amorphous silicon photonic cells due to its higher conversion efficiency and output power. Made...

SKU: DF-SEN0611 | Brand: DFRobot

The Gravity: Correlated Color Temperature (CCT) & ALS Meter is a high-performance light sensing device, specifically designed to meet the needs of professional videographers and photographers. With precise calibration...

SKU: AF-6022 | Brand: Adafruit

DescriptionPerfect for building your custom keyboard, these "Half Height" Low Profile MX key switches are compatible with standard MX layouts and solder-free sockets, offering a significantly slimmer design. While st...