Brands

SKU: AF-4156 | Brand: Adafruit

A pack of five 20-pin female headers in blue, with standard 0.1" (2.54mm) pitch. These are essential for connecting breakout boards, shields, and wires to perfboard and PCB projects. The blue plastic housing adds a sp...

SKU: AF-4000 | Brand: Adafruit

The Adafruit Metro M4 Express AirLift combines the powerful ATSAMD51J19 ARM Cortex M4 processor with an on-board ESP32 WiFi co-processor — all in the standard Metro/UNO shield-compatible form factor. With 120 MHz cloc...

SKU: EC-CRT40540K | Brand: Elecrow

The Crowtail STEAM Edu Kit for Micro:bit contains 12 common Crowtail modules, it’s a great way to build innovative projects to learn programming and electronics. All of the Crowtail modules have a standard 4 pin co...

SKU: AF-4164 | Brand: Adafruit

This side-lighting fibre optic tube produces a glowing effect along its entire length when illuminated by a powerful LED. Unlike standard fibre optics that only emit light from the end, this tube allows light to escap...

SKU: AF-4157 | Brand: Adafruit

A pack of five 20-pin female headers in red, with standard 0.1" (2.54mm) pitch. These are essential for connecting breakout boards, shields, and wires to perfboard and PCB projects. The red plastic housing adds a spla...

SKU: AF-4201 | Brand: Adafruit

Give any microcontroller WiFi connectivity with the Adafruit AirLift Breakout. This board uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...

SKU: AF-4110 | Brand: Adafruit

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on...

SKU: AF-4104 | Brand: Adafruit

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on...

SKU: AF-3877 | Brand: Adafruit

A hex Schmitt-trigger inverter IC that doubles as a handy logic level shifter. The 74AHCT14 provides six independent inverter channels, each with Schmitt-trigger inputs for clean switching on noisy or slow-transitioni...

SKU: AF-4224 | Brand: Adafruit

The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite displa...

SKU: EF-EF04012 | Brand: ElecFreaks

Photo Interrupter Sensor is a sensor module based on ITR9608 photoelectric switch, together with special Arduino shield in use. It has been widely used in parts counting, motor speed and so on. Three pins electronic b...

SKU: AF-4105 | Brand: Adafruit

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on...

SKU: AF-4137 | Brand: Adafruit

We love playing with obscure materials that have a creepy-cool or magical quality. Sure, there's invisible ink, but have you ever used heat to make a painting disappear?We're carrying these Thermochromic Pigments in a...

SKU: EF-EF11083 | Brand: ElecFreaks

The Octopus Dust Sensor Module features the Sharp GP2Y1010AU0F optical dust sensor, capable of detecting fine particles with a diameter as small as 0.8 μm. It uses an infrared LED and phototransistor to measure dust d...

SKU: SF-GPS-15210 | Brand: SparkFun

The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...

SKU: SF-GPS-15193 | Brand: SparkFun

The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...

SKU: EF-EF04061 | Brand: ElecFreaks

A linear sliding potentiometer module from the ElecFreaks Octopus series. Provides an analogue voltage output proportional to the slider position, making it useful as a variable input for controlling volume, brightnes...

SKU: SF-SEN-14722 | Brand: SparkFun

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (V...

SKU: DF-FIT0589 | Brand: DFRobot

A spring-loaded friction torque limiter (model TL350-2) that protects drive systems from damage caused by shock loads, overloads, or machine jams. When torque exceeds the preset threshold, the coupling slips to absorb...

SKU: DF-FIT0588 | Brand: DFRobot

This is a CE-certified XT90 plug that is mini-sized and takes up less space. The banana plug features a true gold plating and a cross-slot design with a larger contact area that can withstand a constant 40A and peak ...