Brands

SKU: AF-4119 | Brand: Adafruit

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of yellow LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 1...

SKU: AF-1079 | Brand: Adafruit

This miniature 8×8 LED matrix packs 64 bright white LEDs into a compact 0.8″ (20 mm) square package. The 16 pins (8 per side) are on standard 0.1″ spacing, so the module plugs directly into a breadboard with room to s...

SKU: TB-SP0720 | Brand: Little Bird

PCB Mount, single pole, momentary. Suitable for keyboards, security systems, etc. 5 colours. - These switches are normally open SPST. When button is depressed the switch closes, but only while the button is down.- C...

SKU: EC-DTS04512B | Brand: Elecrow

This prototype expansion board breaks out all of the BBC micro:bit's edge connector pins to labelled headers and includes a small breadboard for building circuits. It provides a beginner-friendly way to learn electron...

SKU: AF-1093 | Brand: Adafruit

Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatibles. It can be used by students, artists, athletes, makers, and game & m...

SKU: AF-4147 | Brand: Adafruit

Add motion and precision temperature sensing to any Feather board with this all-in-one sensor FeatherWing from Adafruit. It combines two high-quality Analog Devices sensors — the ADXL343 triple-axis accelerometer and ...

SKU: AF-1116 | Brand: Adafruit

Board edge mounting standoffs designed to grip standard 1.6 mm (0.062") thick PCBs by the edge or corner — no mounting holes required. An elegant solution for securing boards like the original Raspberry Pi or any PCB ...

SKU: SF-SEN-15179 | Brand: SparkFun

The TFMini Plus is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 10 centimeters (+/- 5cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)! As with all LiDAR sen...

SKU: AF-1096 | Brand: Adafruit

These Simple RF receivers are the easiest way possible to add wireless control, painlessly! There's no programming, configuring or addressing - simply power the receiver with ~5 VDC and press the buttons on our mat...

SKU: SF-DEV-15164 | Brand: SparkFun

The SparkFun Qwiic OpenLog is an I²C-based data logger that stores serial data to a microSD card. Based on the popular OpenLog, this version replaces the serial interface with I²C and Qwiic connectors, allowing you to...

SKU: AF-1164 | Brand: Adafruit

This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy INA169 chip on this breakout to both measure both the DC current draw and have a...

SKU: AF-4042 | Brand: Adafruit

This LED Is super chonky! Bigger than your average LED, it has a big, bold, and beautiful diffused body that measures approximately 18mm diameter. Inside is nestled a bi-color red and green LED, just like you're famil...

SKU: AF-1206 | Brand: Adafruit

The Adafruit SMT Breakout PCB for 20-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 20-pin TSSOP footprint while the other sup...

SKU: AF-1155 | Brand: Adafruit

A sturdy cast aluminium corner brace for joining 20×20mm aluminium extrusion at 90° angles. Stronger than extruded corner supports, with two mounting holes for a secure connection between extrusion pieces. Key Featur...

SKU: AF-1230 | Brand: Adafruit

Beguiled by a fancy new chip, regulator or transistor that is only available in a SOT23-3, SOT23-5, SOT23-6, SOT-223, SOT-89, or TO-252 pinout? This set of breakout PCBs will make your life much much easier and get...

SKU: SF-DEV-14812 | Brand: SparkFun

If you’re ready to step up your Arduino game from older 8-bit/16MHz microcontrollers, the SparkFun RedBoard Turbo is a formidable alternative. At its heart, the RedBoard Turbo uses the ATSAMD21G18, which is an ARM Cor...

SKU: AF-1246 | Brand: Adafruit

Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Comp...

SKU: DF-KIT0138 | Brand: DFRobot

IoT Starter Kit is an all-in-one bundle for micro:bit beginners to fast experience and build Internet of Things projects.The kit comes with a micro:bit microcontroller, a Wi-Fi module and 7 sensors/actuators that are ...

SKU: DF-DFR0577 | Brand: DFRobot

The Gravity I/O Expansion Shield for Pyboard connects your Pyboard v1.1 to the DFRobot Gravity sensor and module ecosystem with colour-coded plug-and-play connectors. No soldering is required — simply plug Gravity-com...

SKU: DF-DFR0524 | Brand: DFRobot

A 5.5-inch OLED display with 1920×1080 Full HD resolution and a capacitive multi-touch overlay. The display connects via mini-HDMI for video and USB for touch input, with driver-free plug-and-play touch support on Win...