Digital Potentiometer - 10K
SKU: SF-COM-10613 | Brand: SparkFun
A digital potentiometer that lets you control a voltage divider with serial signals from your microcontroller. Wire it up like a standard potentiometer, then use digital commands to adjust the wiper position — no mech...
Delivered by Tue 24 Nov
Tweezers - Curved (ESD Safe)
SKU: SF-TOL-10602 | Brand: SparkFun
Precision curved tweezers with an ESD-safe coating, ideal for handling surface-mount components and other small electronic parts. The fine curved tip provides excellent control when placing or removing tiny components...
Delivered by Tue 24 Nov
3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip
SKU: AF-3286 | Brand: Adafruit
A slim 3×AAA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making i...
Delivered by Wed 16 Dec
Clear Plastic Knob
SKU: SF-COM-10597 | Brand: SparkFun
This plastic knob accepts a 6mm shaft and has a 15mm outer diameter. They simple press-fit onto a shaft. These are clear so that they can be used with our illuminated rotary encoders. Documents: Dimensional Drawing
Delivered by Thu 3 Dec
Coin Cell Battery Holder - 12mm (SMD)
SKU: SF-PRT-10592 | Brand: SparkFun
This is the SMD version of PRT-07948, which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the batte...
Delivered by Tue 24 Nov
RF Link Receiver - 4800bps (315MHz)
SKU: SF-WRL-10533 | Brand: SparkFun
A simple 315 MHz wireless receiver module that pairs with 315 MHz transmitters to create a basic one-way data link. It fits easily into a breadboard and works well with microcontrollers like Arduino for straightforwar...
Delivered by Tue 24 Nov
9V Battery Holder
SKU: SF-PRT-10512 | Brand: SparkFun
A snap-in 9V battery holder with a 5.5mm/2.1mm centre-positive barrel jack connector. The battery clicks securely into place, and three mounting holes allow you to attach the holder to an enclosure or chassis. Key Fe...
Delivered by Tue 24 Nov
Adafruit Music Maker FeatherWing - MP3 OGG WAV MIDI Synth Player
SKU: AF-3357 | Brand: Adafruit
The Adafruit Music Maker FeatherWing turns any Feather board into a versatile audio player and MIDI synthesiser. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, wi...
Delivered by Wed 16 Dec
Graphic Equalizer Display Filter - MSGEQ7
SKU: SF-COM-10468 | Brand: SparkFun
The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...
Delivered by Tue 24 Nov
Panel Current Meter - 0 to 9.99A
SKU: AF-574 | Brand: Adafruit
Put a current meter anywhere with this very handy display. This panel meter requires a DC voltage to run, and then has two thick gauge wires to measure current draw. A shunt is already on board so its very easy to hoo...
Delivered by Wed 16 Dec
Panel Temperature Meter / -30 to +70 °C
SKU: AF-576 | Brand: Adafruit
Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has revers...
Delivered by Wed 16 Dec
12V Solenoid Valve - 3/4
SKU: SF-ROB-10456 | Brand: SparkFun
This 12V DC solenoid valve controls water flow through a 3/4″ threaded inlet and outlet. It is normally closed — fluid is blocked until 12V is applied to the fast-on spade connectors on the solenoid coil. Connect it t...
Delivered by Thu 3 Dec
Liquid Pump - 350GPH (12v)
SKU: SF-ROB-10455 | Brand: SparkFun
The SEAFLO mini water pump is a submersible 12 V pump capable of moving up to 1325 litres per hour (350 GPH). Powered by a heavy-duty 1.5 A motor housed in a tough thermoplastic body, it handles continuous operation i...
Delivered by Tue 24 Nov
SPI/I2C Monochrome 60x32 0.5 OLED Display for Arduino
SKU: DF-DFR0376 | Brand: DFRobot
INTRODUCTION OCELL is a 0.5" micro OLED display designed for Arduino and other microcontrollers. This micro OLED display is small as the grown-up's fingernail- 0.5" only. It has 450cd/m^2 sc...
Delivered by Thu 3 Dec
Wire Connector Set
SKU: DF-FIT0452 | Brand: DFRobot
A 2-way lever-action wire connector made from flame-retardant material. These connectors provide a quick, solderless way to join wires — simply lift the lever, insert the stripped wire, and push the lever down to lock...
Delivered by Tue 24 Nov
GSM Antenna with Magnetic Base (3m)
SKU: DF-FIT0453 | Brand: DFRobot
A GSM antenna with SMA connector and magnetic base for easy mounting on ferrous metal surfaces. The 3 m extension cable uses 174 pure copper construction for low impedance, and the antenna provides 2.5 dBi signal gain...
Delivered by Tue 24 Nov
Stackable Header - 2x23 Pin Female
SKU: SF-PRT-12790 | Brand: SparkFun
This is a 2x23 pin female PTH header, with extra long legs which makes great for stacking. This piece is in the common configuration for Beaglebone Black headers. Each pin has a spacing of 0.1" in between each othe...
Delivered by Thu 3 Dec
Solenoid - 36v
SKU: SF-ROB-10391 | Brand: SparkFun
A linear push-type solenoid rated for 36 V DC that also works well at 12 V. Solenoids produce linear motion for pushing, pulling, or actuating switches and levers. This unit has a measured throw of approximately 10 mm...
Delivered by Tue 24 Nov
Jumper Wire - 0.1, 5-pin, 12
SKU: SF-PRT-10375 | Brand: SparkFun
This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway hea...
Delivered by Thu 3 Dec
Illuminated Toggle Switch with Cover - Blue
SKU: AF-3306 | Brand: Adafruit
Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic blue protective casing, and a diffused blue LED at the tip of the switch, this Blue LED Toggle Switch is s...
Delivered by Wed 16 Dec
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared