Gravity: 8-Digital LED Segment Display Module (Red)
SKU: DF-DFR0646-R | Brand: DFRobot
An 8-digit red LED segment display module with Gravity I2C interface. This module can display numbers, basic characters, and supports 16 levels of brightness adjustment — ideal for clocks, counters, dashboards, and da...
Delivered by Wed 1 Jul
Gravity: 4-Digital LED Segment Display Module (Red)
SKU: DF-DFR0645-R | Brand: DFRobot
A 4-digit 7-segment LED display module from DFRobot's Gravity series. This red LED display communicates over I2C, making it easy to wire up with just two data lines and compatible with a wide range of microcontrollers...
Delivered by Fri 10 Jul
Gravity: 4-Digital LED Segment Display Module (Green)
SKU: DF-DFR0645-G | Brand: DFRobot
The Gravity 4-Digital LED Segment Display Module features a bright green 7-segment display with four digits, perfect for showing numbers, time, sensor readings, and other data in your projects. It communicates over I2...
Delivered by Fri 10 Jul
Adafruit 1.3 240x240 Wide Angle IPS TFT Display
SKU: AF-4520 | Brand: Adafruit
The Adafruit 1.3" 240×240 Wide Angle IPS TFT Display is a bare display module — the same screen used in the Adafruit CLUE and Mini PiTFT 1.3". It delivers 240×240 pixels of 16-bit full colour with 80° viewing angles i...
Delivered by Thu 23 Jul
Assembled Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500
SKU: AF-2598 | Brand: Adafruit
The Adafruit Feather M0 WiFi combines an ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 WiFi module for an all-in-one Arduino-compatible development board with built-in USB, battery charging, and 802.11b/g/n ...
Delivered by Thu 23 Jul
Adafruit eInk Feather Friend with 32KB SRAM
SKU: AF-4446 | Brand: Adafruit
The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect you...
Delivered by Thu 23 Jul
Geared DC Motor with Magnetic Encoder Outputs - 7 VDC 1:20 Ratio
SKU: AF-4416 | Brand: Adafruit
This geared DC motor comes with a built-in magnetic encoder — a magnetic wheel and two Hall effect sensors are already attached to the motor body, giving you quadrature feedback for both speed and direction without an...
Delivered by Thu 23 Jul
OCTOPUS 1-Channel Relay
SKU: EF-EF04026 | Brand: ElecFreaks
OCTOPUS 1-Channel Relay is a single relay electronic brick: Note: Module 5V power supply: Never use power supply more than 5V, which may cause damage to the module. Features: Relay Power Supply Voltage:<V Relay dri...
Delivered by Fri 10 Jul
Geekservo Motor compatible with Lego
SKU: EF-EF09087 | Brand: ElecFreaks
The Geekservo Motor is a compact DC motor designed to be fully compatible with LEGO building systems. Its LEGO-compatible mounting points let you integrate motorised movement directly into brick-based builds, making i...
Delivered by Wed 1 Jul
Octopus MQ3 Alcohol Sensor Brick
SKU: EF-EF04060 | Brand: ElecFreaks
The Octopus MQ3 Alcohol Sensor Brick from ElecFreaks is an analogue gas sensor module with high sensitivity to alcohol vapour. It outputs an analogue voltage proportional to the detected alcohol concentration, making ...
Delivered by Fri 10 Jul
Octopus ADKeypad
SKU: EF-EF04017 | Brand: ElecFreaks
Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...
Delivered by Wed 1 Jul
Ring:bit Car Accessories (Sonar:bit，Tracking Module and LED Light bar)
SKU: EF-EF03435 | Brand: ElecFreaks
An accessory pack for the ElecFreaks Ring:bit Car V2, adding obstacle avoidance, line-following, and colourful LED lighting to your micro:bit-powered car. The kit includes three modules that plug directly into the Rin...
Delivered by Wed 1 Jul
Octopus Passive buzzer Brick OBPB01
SKU: EF-EF04031 | Brand: ElecFreaks
The Octopus Passive Buzzer Brick is a plug-and-play buzzer module from the Elecfreaks Octopus series. Unlike an active buzzer, the passive design lets you control both tone and volume via PWM, making it ideal for gene...
Delivered by Wed 1 Jul
Octopus Alphanumeric LED Brick
SKU: EF-EF04058 | Brand: ElecFreaks
A common cathode alphanumeric LED display module driven by the HT16K33 chip over I2C. The 0.56-inch digit height makes it suitable for displaying letters, numbers, and basic symbols in electronics projects and interac...
Delivered by Wed 1 Jul
Experiment box for micro:bit (with micro:bit)
SKU: EF-EF08199 | Brand: ElecFreaks
ParameterSKU: EF08199/EF08200 The board: micro:bit Coding language: makecode\python\C++ Power supply: 2 x AA Connection line: banana line Size: 25X17.6X...
Delivered by Wed 1 Jul
LED Ring Light - 76mm Diameter
SKU: AF-4433 | Brand: Adafruit
This LED Ring Light is designed for use with microscopes but we kinda like the design and think it could be a really nice LED element for costuming or lighting effects or... something else? Of course you could also ju...
Delivered by Thu 23 Jul
Ultra Skinny NeoPixel 1515 LED Strip 4mm wide - 0.5 meter long - 75 LEDs
SKU: AF-4368 | Brand: Adafruit
We have all sorts of LED strips for a wide range of needs. Chonky strips? We got those! Strips with alligator clips that are easy-peasy to MakeCode? Oh definitely. Weatherproof? We have a gamut of options.Now we have ...
Delivered by Thu 23 Jul
Aluminum Metal Heatsink Raspberry Pi 4 Case - Without Fans
SKU: AF-4341 | Brand: Adafruit
A premium anodised aluminium enclosure for the Raspberry Pi 4 with completely silent passive cooling. The solid aluminium body acts as a heatsink for the main processor, keeping the Pi cool without any fans or moving ...
Delivered by Wed 1 Jul
edge:bit for micro:bit (edgebit)
SKU: EF-EF03414 | Brand: ElecFreaks
Edge:bit is a breakout board for protecting your micro:bit golden finger. The special designed golden finger brings more convenience to micro:bit extension. But, at the same time, it is easily abraised or scratched by...
Delivered by Fri 10 Jul
SparkFun ATX Power Connector Breakout Board
SKU: SF-BOB-15035 | Brand: SparkFun
Do you need to power a project with 12V and 5V from one power supply? The ATX power connector breakout board breaks out the standard 4-pin computer peripheral port when mated with an ATX connector for your 12V and 5V ...
Delivered by Fri 10 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
