Brands

SKU: AF-1751 | Brand: Adafruit

This 9.7" IPS TFT display module is the same ultra-high pixel density retina panel found in iPad 3 and 4 tablets. With a 2048×1536 resolution, it delivers incredibly sharp visuals for custom monitor builds and embedde...

SKU: AF-1773 | Brand: Adafruit

This 50-pin top-contact FPC connector is a surface-mount component for connecting 0.5mm pitch FPC/FFC cables to your custom PCB. It's compatible with many 50-pin displays including 2.8″ TFT panels with resistive touch...

SKU: AF-1685 | Brand: Adafruit

A push-button toggle switch with three wire leads. Each press alternates the connection — push once to connect the middle pin to one side, push again to switch it to the other. It functions as a simple, satisfying mec...

SKU: AF-2273 | Brand: Adafruit

This soft potentiometer is an interesting way to add an adjustable resistor / slide potentiometer to your wearable. You can use it to adjust the brightness of an LED, or as a sensor input to your Flora or Gemma. When ...

SKU: PL-2698 | Brand: Pololu

M3 Phillips head machine screws, 16 mm long. A common fastener size used in electronics enclosures, 3D printer assemblies, robotics builds, and general prototyping. Sold in a pack of 25. Specifications Thread Size:...

SKU: AF-2454 | Brand: Adafruit

The Adafruit DPI TFT Kippah connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. The result is a fast, native 18-bit colour display with full g...

SKU: AF-2439 | Brand: Adafruit

An analog LED strip featuring both RGB and warm white (~3000K) LEDs at 60 LEDs per metre on a weatherproof white flexi PCB. Control the entire strip at once using any microcontroller and four transistors (one per chan...

SKU: AF-2433 | Brand: Adafruit

The Adafruit DotStar APA102 Cool White LED Strip (60 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consistent...

SKU: AF-2435 | Brand: Adafruit

The Adafruit DotStar APA102 Warm White LED Strip (30 LED/m, ~3000K) uses the same integrated DotStar driver as the RGB strips but with dedicated warm white phosphor LEDs. The result is an incredibly bright, consistent...

SKU: DF-FIT0006 | Brand: DFRobot

This is a mounting bracket designed for our URM ultrasonic sensor series.It is fully compatible with URM37 and URM04. You can also have this item with only 300 reward points. SPECIFICATIONS Mounting Pitch: 14mm(0....

SKU: AF-2479 | Brand: Adafruit

The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during ...

SKU: AF-2542 | Brand: Adafruit

The Adafruit FONA 808 combines 2G cellular connectivity with integrated GPS tracking in a compact 1.75 × 1.6-inch breakout. Built around the SIM808 module with an MT3337 GPS chipset, it provides voice calling, SMS, GP...

SKU: DF-SEN0233 | Brand: DFRobot

A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemica...

SKU: PL-2508 | Brand: Pololu

This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into ...

SKU: AF-1902 | Brand: Adafruit

The SmartLED Shield (V4) provides a simple, solder-free way to connect a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to HUB75 RGB LED Matrix Panels. Just plug in your Teensy, connect your panel, and start displaying graphic...

SKU: DF-DFR0130-R | Brand: DFRobot

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...

SKU: DF-DFR0489 | Brand: DFRobot

DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC an...

SKU: DF-DFR0031-Y | Brand: DFRobot

The Digital Piranha LED Module (Yellow) is a bright LED module designed for Arduino and compatible microcontroller boards. Control it via a digital pin (LOW = on, HIGH = off) or use PWM output to adjust brightness for...

SKU: PL-1587 | Brand: Pololu

A low-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearb...

SKU: DF-DFR0141 | Brand: DFRobot

The Rainbow LED Ring V3 features 12 individually addressable SMD RGB LEDs arranged in a ring, each controllable for brightness and colour. It comes with a pre-loaded bootloader containing several built-in LED animatio...