Brands

SKU: AF-5446 | Brand: Adafruit

This USB Type C cable adds a DB-9 (DE-9) serial port to your computer or laptop. Works with MacOS X, Linux, and Windows. Note that this provides (approximately) +-6V serial (RS232) not 5V serial (TTL), good for old de...

SKU: AF-5543 | Brand: Adafruit

The Adafruit LSM6DS3TR-C + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It pairs the LSM6DS3TR-C accelerometer/gyroscope with the LIS3MDL magnetometer — prov...

SKU: AF-5488 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: AF-5466 | Brand: Adafruit

A 10KΩ linear slide potentiometer with a built-in geared DC motor underneath the slider. The motor can move the wiper up and down programmatically, while the slider also moves freely by hand when the motor is unpowere...

SKU: AF-5468 | Brand: Adafruit

These DIY magnetic connectors let you add MagSafe-style snap-together connections to your own projects. Each set includes two matching halves with seven spring-loaded pogo pins at 2.2 mm pitch and embedded magnets tha...

SKU: AF-5472 | Brand: Adafruit

Why are bananas never lonely? Because they hang around in bunches!A lot of power supplies, multimeters, and other benchtop equipment use standard 4mm banana plugs to connect this-to-that. When you need more, we now st...

SKU: AF-5471 | Brand: Adafruit

A 0.5-metre red banana plug cable with stackable connectors and retractable safety shrouds. The spring-loaded plastic cover retracts automatically when plugged into a 4 mm banana jack, then extends to cover the metal ...

SKU: SF-DEV-19217 | Brand: SparkFun

We carry several data logging products which have microSD sockets on them: OpenLog Artemis and the Qwiic OpenLog to name but two. They're great for logging data to a microSD card, but when it comes to reading the logg...

SKU: EC-CRB0000PK | Brand: Elecrow

The Crowbits Master kit is the ultimate kit of the Crowbits series, which mainly contains three applications: radar, mobile phone, and game console. The power of the Crowbits module is that it allows us to make app...

SKU: AF-5447 | Brand: Adafruit

A short-profile microSD-to-SD card adapter that sits 11 mm shorter than a standard SD card (excluding the silver lip). It protrudes far less from the card slot, reducing the risk of accidental damage — ideal for lapto...

SKU: AF-5444 | Brand: Adafruit

An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such a...

SKU: AF-5383 | Brand: Adafruit

This small, palm-sized battery power meter has a small display that shows off how much juice is left in your single Lithium Ion/Polymer rechargeable battery. The color display has four levels of power indication once ...

SKU: DF-SEN0496 | Brand: DFRobot

This full-scale oxygen sensor uses an original AO2 CiTiceL electrochemical probe to measure oxygen concentrations from 0–100%Vol via I2C digital output. A built-in calibration algorithm on the signal board supports si...

SKU: WS-14513 | Brand: Waveshare

An edge connector expansion board for the BBC micro:bit that breaks out all I/O pins to standard 2.54mm pitch pin headers for easy breadboard and jumper wire connections. Key Features Full Pin Breakout – All micro:...

SKU: AF-5397 | Brand: Adafruit

The Adafruit LiIon/LiPoly Charger BFF is a compact battery charging add-on designed to mount directly onto the back of any QT Py board. It makes portable power simple — plug in a standard 3.7 V/4.2 V lithium battery, ...

SKU: AF-5391 | Brand: Adafruit

If you're messing around with floppy drives, or disk drives, or other devices that are usually powered with a PC motherboard you'll often see these big 'Molex' connectors used to provide power. They are used to give 5...

SKU: JU-R-E172 | Brand: Jubly-Umph

There are very few rules in art and craft. However, there is one rule that one should always keep in mind: 'There are no mistakes in art.' If you're afraid of making a mistake, you'll never try anything new, and you'l...

SKU: SF-DEV-18426 | Brand: SparkFun

The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...

SKU: SF-CAB-18983 | Brand: SparkFun

A 1-metre TRS (Tip, Ring, Sleeve) audio cable with standard 3.5mm plugs on both ends. Suitable for connecting audio devices, development boards with 3.5mm jacks, and other three-conductor applications. Specifications...

SKU: SF-CAB-19244 | Brand: SparkFun

The MyoWare 2.0 Reference Cable extends the reference pin on the MyoWare 2.0 Muscle Sensor, allowing you to place the reference electrode on a separate part of the body. This is useful when the sensor's built-in refer...