Brands

SKU: AF-3201 | Brand: Adafruit

Wireless is wonderful, but sometimes you need the strong reliability of a wired connection. The Ethernet FeatherWing adds quick and easy wired Internet to any Feather board — just plug in a standard Ethernet cable and...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: SF-ROB-13177 | Brand: SparkFun

The Micro Gripper Kit B is a compact robotic gripper designed for small-scale robotics projects. It works with any sub-micro size Hitec servo (not included) and features the standard 0.77" hub mount pattern for easy i...

SKU: AF-394 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-3218 | Brand: Adafruit

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure&nbs...

SKU: SF-PRT-10927 | Brand: SparkFun

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy loo...

SKU: DF-KIT0018 | Brand: DFRobot

The DFRobot Gravity Intermediate Kit for Arduino takes you beyond the basics with a comprehensive set of sensors, modules, and an Arduino-compatible board. Starting with simple LED projects and progressing to more com...

SKU: SF-TOL-10865 | Brand: SparkFun

There’s nothing worse than getting ready for a good hack and then realizing that you can’t even get the box open because you don’t have the right screwdriver. Sure, we all have a few Phillips-head drivers and maybe a ...

SKU: SF-PRT-13054 | Brand: SparkFun

A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or c...

SKU: DF-DFR0213 | Brand: DFRobot

The Dreamer Nano V4 is a surface mount breadboard embedded version of the ATMEGA 32U4 with integrated Micro USB. It has everything that Arduino Leonardo has (electrically).Physically, it is just missing power jack ...

SKU: DF-FIT0414 | Brand: DFRobot

This is a handy cables kit for WTRnode users. It contains a USB to TTL cable which allows for a simple way to connect TTL interface devices to USB, and a WRTnode dedicated network cable. WRTnode(A Mini Op...

SKU: DF-FIT0416 | Brand: DFRobot

Introduction This product converts from USB output to TTL output, supports three levels, facilitates communication between PC and serial port, does not need an external crystal oscillator, has high stability and str...

SKU: AF-3316 | Brand: Adafruit

The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light senso...

SKU: SF-DEV-10587 | Brand: SparkFun

Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The SparkFun Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next A...

SKU: AF-3318 | Brand: Adafruit

Check out this handy USB extension cable, which will make it easy for you to enclose a device that has a Mini-B USB type port. We think this would be most handy when putting a Teensy, FTDI friend, USB LiPo charger, Be...

SKU: SF-DEV-10524 | Brand: SparkFun

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to ...

SKU: AF-2926 | Brand: Adafruit

The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, wi...

SKU: SF-PRT-10371 | Brand: SparkFun

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers...

SKU: AF-616 | Brand: Adafruit

Give yourself some more room with an EL wire cable extender. This cable has a 2-pin JST SM plug on one end and receptacle on the other. Use it to extend the reach of EL wire, panel, tape, etc. The cable is a meter ...

SKU: DF-DFR0419 | Brand: DFRobot

You are viewing a 4GB RAM LattePanda with 64GB internal memory. It does not include a Windows 10 activation key. A LattePanda is a complete Windows 10 single board computer. It has everything a regular PC has a...