Brands

SKU: DF-DFR0994 | Brand: DFRobot

Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...

SKU: SF-SEN-23352 | Brand: SparkFun

QR codes are a great way for users to communicate with microcontrollers, whether it’s passing WiFi credentials to set up connectivity or sending personal information to fill out a digital badge. Reading them from a ma...

SKU: DF-DFR1056 | Brand: DFRobot

Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...

SKU: DF-SEN0567 | Brand: DFRobot

Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...

SKU: AF-5709 | Brand: Adafruit

The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...

SKU: SF-DEV-21247 | Brand: SparkFun

The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...

SKU: DF-DFR0979 | Brand: DFRobot

The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrup...

SKU: AF-5652 | Brand: Adafruit

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Syn...

SKU: AF-5619 | Brand: Adafruit

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not ...

SKU: DF-SEN0551 | Brand: DFRobot

This Gravity: liquid flow sensor is designed based on the electromagnetic principle. It adopts O-ring rubber seal and uses silicone sealant at the outlet end to strength water-resistance. With high anti-interference a...

SKU: AF-5497 | Brand: Adafruit

We now have a handy extension cord for JST-XH projects!&nbsp;One end has a JST-XH&nbsp;socket, and the other has a matching plug. Between the two, 500mm of color-coded wire.&nbsp;This solid 2.5mm pitch connector exten...

SKU: AF-5532 | Brand: Adafruit

Have you found yourself in a maze of twisty-turny knobs, all alike? These micro potentiometer&nbsp;(or rotary encoder) knobs offer a rainbow burst of color to your synth or control panel. They are made of a hard plast...

SKU: LB-LS1274 | Brand: Little Bird

Light up your night with this Battery Powered PIR Motion Sensor with 9 LED illumination.This LED light is perfect for providing light in dark areas around your home. The PIR motion sensor allows the light to turn o...

SKU: SF-SEN-19512 | Brand: SparkFun

The Arducam Camera Module V3 delivers 16MP autofocus imaging for Raspberry Pi projects, powered by the Sony IMX519 sensor. With twice the resolution of the V2 camera module, it's an affordable yet high-performance opt...

SKU: AF-5390 | Brand: Adafruit

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your Raspberry Pi Zero&nbsp;but was still small...

SKU: SF-SEN-19096 | Brand: SparkFun

The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...

SKU: DF-SEN0522 | Brand: DFRobot

This human body sensing switch adopts an infrared detection way to control load switch. It offers a detection range of 5~8m, high sensitivity, and reliability.&nbsp;The sensor has an adjustable delay function and the ...

SKU: AF-5357 | Brand: Adafruit

This double-row 2×17 (34-pin) IDC box header with 2.54 mm (0.1″) pitch is commonly used for floppy disk drive interfaces and other legacy 34-pin IDC ribbon cable connections. The keyed box header ensures correct cable...

SKU: AF-5281 | Brand: Adafruit

An Alpha 5K linear potentiometer with right-angle PC mount pins spaced at 0.2" — perfect for plugging directly into a breadboard or perfboard during prototyping. When you're ready for a permanent build, mount it to a ...

SKU: DF-FIT0850 | Brand: DFRobot

This NPN to PNP signal converter module bridges the gap when your sensor outputs an NPN signal but your controller or PLC expects a PNP input. Simply wire it inline between the sensor and the controller to convert the...