Brands

SKU: SF-PRT-08671 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 100mm length Documents: JST connector

SKU: DF-DFR0222 | Brand: DFRobot

Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through internet. The Xboard Relay combines an Atmega 32u4 microprocessor and wi...

SKU: DF-DFR0225 | Brand: DFRobot

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousand...

SKU: AF-2928 | Brand: Adafruit

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your mi...

SKU: DF-FIT0302 | Brand: DFRobot

This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35...

SKU: SF-COM-08377 | Brand: SparkFun

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our b...

SKU: SF-DEV-13975 | Brand: SparkFun

At SparkFun we use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so we decided to make our own version that combines a...

SKU: SF-COM-07950 | Brand: SparkFun

This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.This is not a true piezoelectric speaker but behaves similarly. Inst...

SKU: SF-PRT-07937 | Brand: SparkFun

Dip sockets for all your prototyping needs. If you’ve ever had to de-solder a dip part from a circuit board, you know how valuable these are! Number of pins include: 8, 14, 16, 18, 28, and 40. This is a 300mil wide ...

SKU: SF-BOB-13906 | Brand: SparkFun

The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/demultiplexer. The 74HC4051 allows you to turn four I/O pins into eight multifunctional, indi...

SKU: SF-COM-00589 | Brand: SparkFun

The ‘must have’ IC for 3V projects. This is the RS232 converter IC that is capable of running at 3V and communicating with 3V logic. Comes in an easy to solder 16-Pin SOIC SMD package. Requires four external 0.1uF cer...

SKU: SF-PRT-00587 | Brand: SparkFun

USB Type ‘Mini-B’ Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players, media/disk readers, USB hubs, pretty much anything small and USB.

SKU: SF-PRT-11864 | Brand: SparkFun

This Deans (mini T-plug) connector pair provides a secure, high-current connection rated up to 30A. Widely used in R/C vehicles, battery packs, and power distribution, the polarised design prevents reverse-polarity co...

SKU: SF-COM-00536 | Brand: SparkFun

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.

SKU: AF-2946 | Brand: Adafruit

The Adafruit IS31FL3731 breakout is a charlieplexed PWM LED matrix driver that controls a 16×9 grid of individually dimmable LEDs over I2C. Each of the 144 LEDs can be set to any brightness level with 8-bit (256-level...

SKU: AF-3008 | Brand: Adafruit

Short female headers designed for tight spaces where standard-height headers won't fit. At just 5mm tall (compared to the standard 8mm), these low-profile headers are ideal for compact builds and slim assemblies. Eac...

SKU: SF-PRT-13777 | Brand: SparkFun

The SparkFun Battery Babysitter is an all-in-one single-cell Lithium Polymer (LiPo) battery manager. It’s half battery charger, half battery monitor, and all you’ll ever need to keep your battery-powered project runni...

SKU: AF-2989 | Brand: Adafruit

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its shape. We love the sturdiness and reliability ...

SKU: SF-CAB-11604 | Brand: SparkFun

USB On-The-Go is a really useful USB specification! It allows some small devices that would usually be unable to act as a host to have limited hosting capabilities! USB-OTG is common for things like tablet computers a...

SKU: SF-DEV-13712 | Brand: SparkFun

The SparkFun OpenLog is an open-source serial data logger based on the ATmega328 running at 16 MHz. It logs incoming serial data directly to a microSD card, supporting cards from 64 MB to 64 GB in FAT16 or FAT32 forma...