Breadboard - Mini Modular
SKU: SF-PRT-12047 | Brand: Little Bird
A compact solderless breadboard for quickly prototyping small electronics projects. With 170 tie points, it gives you enough space to build and test simple circuits without taking up much room on your bench or in an e...
Delivered by Mon 23 Nov
UPS HAT (D) for Raspberry Pi, Supports 21700 Li battery (NOT included), 5V Uninterruptible Power Supply, Pogo Pins Connector
SKU: WS-25567 | Brand: Waveshare
The UPS HAT (D) is a powerful uninterruptible power supply designed for Raspberry Pi, offering seamless charging and power output with dynamic path management. This HAT provides stable 5V output, ensuring uninterrupte...
Delivered by Mon 23 Nov
Piezo Buzzer [PS1240]
SKU: AF-160 | Brand: Adafruit
The PS1240 is a compact piezo buzzer for generating beeps, tones, and alerts in electronic projects. Drive it with a 3–30 V peak-to-peak square wave from a timer or microcontroller. It produces its loudest output arou...
Delivered by Mon 23 Nov
M3 Nylon Screw Black Hex Screw Nut Nylon PCB Standoff Assortment Kit 250pcs
SKU: LB-LS0513 | Brand: Little Bird
M3 Nylon Screw Black Hex Screw Nut Nylon PCB Standoff Assortment Kit 250pcs M3*6+6mm 25pcs M3*8+6mm 25pcs M3*10+6mm &n...
Delivered by Mon 23 Nov
USB Audio Adapter
SKU: LB-LS6232 | Brand: Little Bird
For better audio quality when playing music, consider using a USB audio card with your Raspberry Pi. This upgrade can greatly enhance sound quality and volume since the on-board audio is produced through a minimally f...
Delivered by Mon 23 Nov
ThinkNode M5 Walkie-Talkie Pro- Meshtastic (LoRa) Signal Transceiver |ESP32-S3 | 1.54” Screen | GPS Function-915 MHz
SKU: EC-ILM13205D2-915 | Brand: Elecrow
The Elecrow ThinkNode M5 is a high-performance LoRa communication device powered by the ESP32-S3 processor. Pre-installed with Meshtastic firmware and featuring the SX1262 wireless chip, it efficiently sends and recei...
Delivered by Mon 23 Nov
Raspberry Pi 7" Display Case with Pi 5 & HAT Compatibility
SKU: WS-31510 | Brand: Waveshare
A protective enclosure designed for the official Raspberry Pi 7" Touch Display 2 paired with a Raspberry Pi 5. The modular design allows easy assembly, disassembly, and access to heatsinks, cables, and accessories. T...
Delivered by Mon 23 Nov
USB Male to USB Female + MicroUSB + USB-C
SKU: LB-LS4167 | Brand: Little Bird
This USB Male to USB Female + MicroUSB + USB-C Adapter is perfect for connecting your USB devices to your computer. It features a male USB connector on one end and a female USB connector on the other, as well as a ...
Delivered by Mon 23 Nov
Mini Vibration Motor (10*2.7mm)
SKU: DF-FIT0774 | Brand: DFRobot
A compact coin-type vibration motor measuring just 10 × 2.7 mm — roughly the size of a fingernail. It delivers strong vibration with low noise and operates across a 1.5–4.2 V range, with vibration intensity increasing...
Delivered by Mon 23 Nov
Gravity: Expansion Board for Raspberry Pi Pico
SKU: DF-DFR0848 | Brand: DFRobot
A Gravity-compatible expansion board for the Raspberry Pi Pico, breaking out all GPIO pins to labelled female headers and Gravity-standard 3-pin connectors. Provides plug-and-play access to 13 digital I/O, 3 analogue ...
Delivered by Mon 23 Nov
FireBeetle ESP32-E IoT Microcontroller with header (Supports Wi-Fi Bluetooth)
SKU: DF-DFR0654-F | Brand: DFRobot
FireBeetle ESP32-E, specially designed forIoT, is an ESP-WROOM-32E-based main controller board with dual-core chips. It supports WiFi and Bluetooth dual-mode communication, and features small size, ultra-low power ...
Delivered by Mon 23 Nov
Prong Soil Moisture Sensor for BBC micro:bit
SKU: KI-5647 | Brand: Kitronik
The Prong Soil Moisture Sensor mounts directly onto a BBC micro:bit to monitor soil moisture levels. Two conductive tines are inserted into the soil — any moisture conducts an analogue voltage that the micro:bit reads...
Delivered by Mon 23 Nov
Micro:bit Cable and Battery Case with Switch
SKU: LB-MICROACC | Brand: Little Bird
Handy accessories to get you started with micro:bit! This little kit has a battery pack with switch for portable projects, and a micro-USB cable to connect your micro:bit to your computer to start your coding...
Delivered by Mon 23 Nov
Temperature and Humidity Sensor Module DHT11
SKU: LB-LR0029 | Brand: Little Bird
DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use. This DHT11 Arduino temperature and humidity sensor has a full range temperature compensation, low power consumption...
Delivered by Mon 23 Nov
Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25
SKU: AF-2780 | Brand: Adafruit
ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 220Ω Resistors. More specifically, they are carbon ...
Delivered by Mon 23 Nov
Motion Activated Audio Player with Two Separate PIR
SKU: LB-2-PIR-AUDIO | Brand: Little Bird
This motion-activated MP3 player is designed to play audio automatically when movement is detected by PIR sensors. The sensors are separate from the player, so they can be positioned where they are most useful while t...
Delivered by Mon 23 Nov
3D RGB Xmas Tree for Raspberry Pi
SKU: PH-TPH-017 | Brand: PiHut
The 3D RGB Xmas Tree sits on top of your Raspberry Pi and features 25 individually addressable RGB LEDs that you can control with Python. Change colours, adjust brightness, create fading effects, or build your own fes...
Delivered by Mon 23 Nov
Little Bird PN532 NFC MODULE
SKU: LB-LR0214-148A | Brand: Little Bird
This PN532-based NFC module is designed for near field communication projects in the 13.56MHz range, with a maximum communication distance of 30mm.The board includes its own antenna and can communicate via SPI, IIC (I...
Delivered by Mon 23 Nov
Micro USB Cable
SKU: DF-FIT0265 | Brand: DFRobot
Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Mic...
Delivered by Mon 23 Nov
JST 2-pin cable
SKU: AF-261 | Brand: Adafruit
Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'ex...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared