Brands

SKU: AF-898 | Brand: Adafruit

This here is your standard A-microB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (among other things).Approximately 6.5" long from end to end, its a littl...

SKU: AF-4056 | Brand: Adafruit

This panel mount cable will allow you to enclose a device that has a USB Micro B port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a ...

SKU: AF-4172 | Brand: Adafruit

The Adafruit HUZZAH32 ESP32 Breakout is a compact, breadboard-friendly development board built around the Espressif ESP32 dual-core processor. With WiFi, Bluetooth Classic, and BLE support, 4 MB SPI Flash, and a gener...

SKU: AF-1207 | Brand: Adafruit

The Adafruit SMT Breakout PCB for 16-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 16-pin TSSOP footprint while the other sup...

SKU: AF-1208 | Brand: Adafruit

The Adafruit SMT Breakout PCB for 28-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 28-pin TSSOP footprint while the other sup...

SKU: AF-1231 | Brand: Adafruit

The ADXL345 from Analog Devices is a triple-axis digital accelerometer with both I2C and SPI interfaces. This breakout board includes an on-board 3.3V regulator and logic-level shifting, making it easy to interface wi...

SKU: AF-3045 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assemble...

SKU: AF-1248 | Brand: Adafruit

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits the FX-888 analog and digital irons, and they're fast to swap, takes only...

SKU: AF-1194 | Brand: Adafruit

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. T...

SKU: AF-1272 | Brand: Adafruit

The Adafruit Ultimate GPS Logger Shield combines the popular Ultimate GPS module with a MicroSD card slot, giving your Arduino a complete GPS datalogging solution. Built around the MTK3339 chipset, it tracks up to 22 ...

SKU: AF-1313 | Brand: Adafruit

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm a...

SKU: AF-3986 | Brand: Adafruit

This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...

SKU: AF-1349 | Brand: Adafruit

A really tiny portable inverter for EL wire. Powers off of a single AAA battery (not included!), it can drive up to 50cm / 20 inches of our high-brightness EL wire or 10cm x 1cm long piece of EL tape for 3 hours (o...

SKU: AF-3984 | Brand: Adafruit

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, bas...

SKU: AF-3942 | Brand: Adafruit

The HC-SR04 is an ultrasonic distance sensor that measures distances from approximately 2 cm to 400 cm (best results between 10–250 cm). Widely used in robotics, automation, interactive art, and motion sensing project...

SKU: AF-3928 | Brand: Adafruit

The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixe...

SKU: AF-917 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep wat...

SKU: AF-1501 | Brand: Adafruit

The Adafruit Trinket 5V is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a single...

SKU: AF-1467 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...

SKU: SF-CAB-14576 | Brand: SparkFun

These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use fo...