Brands

SKU: DF-TEL0142 | Brand: DFRobot

When building a project that needs to transmit some simple signals wirelessly, have you been bothered by the any of the following problems: Bluetooth's cumbersome AT command configuration and high cost, Wifi's signal ...

SKU: DF-FIT0861 | Brand: DFRobot

A set of five solderless snap-down connectors for joining 10 mm wide, 3-wire LED strips without soldering. Simply align the strip's copper pads with the connector contacts and snap the cover down for a firm electrical...

SKU: AF-5160 | Brand: Adafruit

Cytron's Maker Pi Pico Base incorporates the most wanted Reset button for your Raspberry Pi Pico and gives you access to all GPIO pins on two 20-pin headers, with clear labels. Each GPIO is paired with an LED indicato...

SKU: SF-SEN-18367 | Brand: SparkFun

A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to yo...

SKU: WS-20330 | Brand: Waveshare

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For softwa...

SKU: LB-LS1891 | Brand: Little Bird

HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface.&nbsp...

SKU: EC-SEL71220A | Brand: Elecrow

A current sensing module based on the Allegro ACS712 Hall effect sensor, capable of accurately measuring both AC and DC current up to ±20 A. The module outputs a proportional analogue voltage that can be read directly...

SKU: AF-4831 | Brand: Adafruit

The Adafruit LTR390 is a dual-purpose UV and ambient light sensor with true UVA sensing at a peak spectral response between 300 and 350 nm. Unlike UV index approximation sensors, the LTR390 has a genuine UV photodiode...

SKU: DF-FIT0720 | Brand: DFRobot

These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with c...

SKU: EC-SEA0001T | Brand: Elecrow

The Crowtail Starter Kit for Arduino is a beginner-friendly electronics kit built around the Crowduino Uno-SD board and the Crowtail modular connector system. With 22 plug-and-play modules and over 20 guided tutorials...

SKU: EC-DPO01117E | Brand: Elecrow

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate ...

SKU: LB-EAGLED-BUZZ-KIT | Brand: Little Bird

The EagLED is Little Bird Electronics' own Arduino-compatible wearable development kit, designed from the ground up for e-textile projects. It packs a microcontroller, LEDs, light sensor, push button, and buzzer onto ...

SKU: AF-4716 | Brand: Adafruit

The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a...

SKU: EC-ACS70028DH | Brand: Elecrow

The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor control...

SKU: EC-MCA03168A | Brand: Elecrow

The Nano 168 is a compact, breadboard-friendly Arduino-compatible development board based on the ATmega168 microcontroller. It offers the same functionality as the Arduino Nano in a small DIP form factor, with 14 digi...

SKU: AF-4646 | Brand: Adafruit

The Adafruit BNO055 STEMMA QT breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion and plug-and-play I2C connectivity. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer...

SKU: SF-ROB-16413 | Brand: SparkFun

The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is dete...

SKU: EC-DRA09012K | Brand: Elecrow

An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapte...

SKU: LB-TINY | Brand: Little Bird

The CJMCU card is a small microcontroller based on the ATTiny85 chipset. It is perfect for wearable projects. Also widely used in electronic projects due to its compatibility with the Arduino IDE, bringing an ATtiny85...

SKU: EF-EF04093 | Brand: ElecFreaks

Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the...