Brands

SKU: AF-5064 | Brand: Adafruit

The SHT30-D sensor has an excellent ±2% relative humidity and ±0.5°C accuracy for most uses. Unlike earlier SHT sensors, this sensor has a true I2C interface.The enclosed box is a Sensiron SHT-30 digita...

SKU: AF-5325 | Brand: Adafruit

The Adafruit QT Py ESP32-S2 combines Wi-Fi connectivity with native USB in the compact QT Py form factor. Built around the ESP32-S2 — a single-core 240 MHz Tensilica processor with 4 MB flash and 2 MB PSRAM — this boa...

SKU: AF-5056 | Brand: Adafruit

The Adafruit Trinkey QT2040 is an RP2040-based microcontroller that plugs directly into any USB-A port on your computer or laptop. With a STEMMA QT / Qwiic connector on the end, it turns any I2C sensor or accessory in...

SKU: PR-PIM559 | Brand: Little Bird

PicoSystem is a pocket sized handheld games console, built around Raspberry Pi's RP2040 chip (that's the little fella that's the core of a Raspberry Pi Pico).We've taken these lucky bits of silicon to the component sp...

SKU: AF-5221 | Brand: Adafruit

This breakout PCB converts the ANO rotary navigation encoder's non-standard pinout into a straightforward, breadboard-friendly header strip. The ANO encoder combines a rotary encoder with directional and centre-push b...

SKU: DF-DFR0762 | Brand: DFRobot

Specially designed for FireBeetle 2 series (M0, ESP32-E), this Gravity IO expansion shield offers various ports including digital, analog, I2C, UART, SPI, etc. Also, it comes with power input socket for connecting ext...

SKU: LB-LS1307 | Brand: Little Bird

This is the ESP32-CAM WiFi + Bluetooth Camera Module! It is designed be used for a wide range of IoT applications. For example, you could use it to build your own smart home device, set up a security monitoring sys...

SKU: MD-A0036 | Brand: Makedo

Get started with cardboard construction using this Makedo Basic Starter Pack. With 36 pieces including the MINI-TOOL, it's ready to use straight out of the box — perfect for first-time makers or as a top-up for your e...

SKU: AF-4877 | Brand: Adafruit

This simple development board for the STM32F411 is a great way to add a powerful STM chip to your next project. Featuring the STM32F411CEU6, this chip has 512 KB of flash, 128 KB of SRAM and runs at 100 MHz. There's a...

SKU: AF-4872 | Brand: Adafruit

A matching pair of 2-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, relia...

SKU: DF-SEN0387 | Brand: DFRobot

This magnetic switch consists of two parts: a reed switch sensor with cable and a magnet trigger in a plastic housing. When the magnet is brought within approximately 1 cm of the sensor, the reed switch closes, allowi...

SKU: DF-SEN0374 | Brand: DFRobot

BNO055 is a new sensor IC for implementing an intelligent 9-axis Absolute Orientation Sensor. It is a System in Package, integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope, a triaxial geomagnetic...

SKU: SF-TOL-17235 | Brand: SparkFun

The Stickvise holds your PCB flat at table level, giving your hands a stable surface to rest on while soldering — a significant advantage over elevated, tilted vises when working on fine pitch components. The low-prof...

SKU: AF-4690 | Brand: Adafruit

Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. It's easy to use and more affordable than ever!These modules are t...

SKU: RP-SC0451 | Brand: Raspberry Pi Ltd

Red T-shirt White Logo Adult Size Medium. Sizing is to a standard UK high-street size, and the shirts fit true to size.  We recommend purchasing your usual size.  If you fall between two sizes, we advise ...

SKU: SF-COM-16473 | Brand: SparkFun

The classic 555 timer/oscillator IC from Texas Instruments — one of the most versatile and widely used integrated circuits in electronics. With just a few external resistors and capacitors, it can generate timing dela...

SKU: EC-CDP03051C | Brand: Elecrow

The Arduino CNC Shield V3.51 by Protoneer turns an Arduino Uno into a 4-axis CNC controller. Compatible with GRBL 0.9 firmware, it accepts Pololu-style stepper drivers (sold separately) and supports up to 4 stepper mo...

SKU: EC-MCA03328A | Brand: Elecrow

The Crowduino Nano V3.1 is a compact, breadboard-friendly development board based on the ATmega328, fully compatible with the Arduino Nano 3.0 and its shields. It features a Mini-B USB port for programming and serial ...

SKU: EC-DTS02115S | Brand: Elecrow

This shield is specially designed for Micro: bit, LCD1602 and Micro: bit using 4-wire connection, it is the same size as LCD1602 display and has 4 crowtail interface, IIC, UART, analog port and digital port. LCD160...

SKU: AF-4632 | Brand: Adafruit

The Adafruit PMSA003I Air Quality Breakout is a compact laser-scattering particulate matter sensor with an I2C interface — a significant advantage over the UART-based sensors that dominate this category. Simply connec...