Brands

SKU: DF-DFR0251 | Brand: DFRobot

A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in automatic control circuit. It i...

SKU: AF-64 | Brand: Adafruit

This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to...

SKU: SF-DEV-11235 | Brand: SparkFun

The Arduino and Breadboard Holder is a sturdy plastic base plate that keeps your Arduino and breadboard neatly organised during prototyping. The board mounts with two included screws using the standard Arduino mountin...

SKU: SF-ROB-13259 | Brand: SparkFun

These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you ...

SKU: DF-KIT0021 | Brand: DFRobot

A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one d...

SKU: AF-1950 | Brand: Adafruit

Premium female-to-female jumper wires in a convenient 20-pin ribbon cable, perfect for making wire harnesses or jumpering between headers on PCBs. Each wire is 150mm (6") long with 0.1" (2.54mm) female header contacts...

SKU: AF-1956 | Brand: Adafruit

A pack of 20 premium male-to-male jumper wires in a convenient ribbon cable format. Each wire is 75 mm (3") long with 0.1" (2.54 mm) male header contacts on both ends, fitting cleanly onto standard-pitch headers. The...

SKU: PR-PIM773 | Brand: Pimoroni

Our Inky Impression E Ink® displays are super crisp, low power and look great from a variety of viewing angles. They have high pixel density and bright vivid colours, perfect for showing off gorgeous dithered images ...

SKU: EC-DIS10411D | Brand: Elecrow

You can use your tablets as a second or third display with this side mount clip, this clip can clamp your tablet or cell phone to your laptop to extend your screen and get multi-display experience. It is a must-have f...

SKU: PI-PIM726 | Brand: Pimoroni

A top of the line Pirate-brand RP2350 microcontroller with all the goodies - 16MB of flash, 8MB of PSRAM, USB-C, Qw/ST and 2.4GHz wireless / Bluetooth.We adore the versatility and value of Raspberry Pi Pico but we als...

SKU: AF-5933 | Brand: Adafruit

The Adafruit ESP32-C6 Feather is built around Espressif's first Wi-Fi 6 SoC, combining 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), and 802.15.4 (Zigbee/Thread) in a single chip. The addition of 802.15.4 support makes it well-s...

SKU: WS-13460 | Brand: Waveshare

NOTE: This product is only 2G Compatible! Unfortunately while there are still 2G networks in some parts of America and Europe, there are no longer 2G networks in Australia anymore.Prohibited by the module manufact...

SKU: AF-5039 | Brand: Adafruit

A 10-pack of two-part relegendable plastic keycaps compatible with Cherry MX and MX-compatible switches. Each keycap consists of an off-white base and a clear snap-on cover — simply remove the cover, insert a custom l...

SKU: EF-EF08252 | Brand: ElecFreaks

The Smart City Kit has a well-selection of IoT:bit, DHT11 sensor, soil moisture sensor, water level sensor, sonar:bit, servos and etc., we could use it to build such themes as the smart parking lot, transportation ...

SKU: SF-DEV-17288 | Brand: SparkFun

The BBC micro:bit v2 is a pocket-sized computer that lets you get creative with digital technology. Each order contains just the micro:bit v2 board. You can code, customize and control your micro:bit from anywhere! Yo...

SKU: SF-DEV-16997 | Brand: SparkFun

Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with mos...

SKU: DF-ROB0156-L | Brand: DFRobot

Note: Maqueen, micro:bit board and battery are not included. Maqueen Loader includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as, metal servo, mecha...

SKU: AF-4410 | Brand: Adafruit

The Adafruit Micro-Lipo Charger is a tiny, easy-to-use charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Simply plug a USB-C cable into any USB power source and connect your bat...

SKU: AF-3416 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution ...

SKU: AF-1187 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, howe...