Crystal 10MHz
SKU: SF-COM-00535 | Brand: SparkFun
Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.
Delivered by Mon 23 Nov
SparkFun Infrared Temperature Breakout - TMP006
SKU: SF-SEN-11859 | Brand: SparkFun
This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it. By using a thermopile to detect and absorb the infrared energy an object is emi...
Delivered by Mon 23 Nov
RGB LED Satellite Module 004 (Circle)
SKU: PL-1245 | Brand: Pololu
The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your...
Delivered by Mon 23 Nov
6x1 F-F 12 Cable for ShiftBrites and ShiftBars
SKU: PL-1239 | Brand: Pololu
A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. ...
Delivered by Mon 23 Nov
ShiftBar
SKU: PL-1242 | Brand: Pololu
The ShiftBar is a medium-power RGB LED controller featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBar modules can be chained together and controlled from a si...
Delivered by Mon 23 Nov
2.7 OLED 12864 Display Module
SKU: DF-FIT0328 | Brand: DFRobot
A 2.7" white OLED display module with 128×64 pixel resolution, driven by the SSD1325 controller. The OLED technology delivers deep blacks, wide viewing angles, and a slim profile — with no backlight required, the disp...
Delivered by Mon 23 Nov
SparkFun GPS Breakout
SKU: SF-BOB-11818 | Brand: SparkFun
This is a more universal GPS breakout board that uses a vertical SMD connector which is perfect for the GP-735T GPS receiver that we sell. It features 2 mounting holes and through-hole connections for wires or headers...
Delivered by Mon 23 Nov
USB-to-Serial Bridge - µUSB-PA5
SKU: SF-DEV-11814 | Brand: SparkFun
The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily fo...
Delivered by Mon 23 Nov
SparkFun Picoboard Starter Kit
SKU: SF-KIT-13863 | Brand: SparkFun
The SparkFun PicoBoard Starter Kit is your go-to source to begin learning everything about the SparkFun PicoBoard and the Scratch programming environment. This kit includes your very own PicoBoard, multiple pieces ...
Delivered by Mon 23 Nov
Gravity: Analog Adjustable Infrared Sensor Switch (50cm)
SKU: DF-SEN0164 | Brand: DFRobot
This adjustable infrared sensor features a high-sensitivity photoreflector to perform distance detection function,ranging from 3cm to 50cm. When the infrared light emitted by the emitter gets reflected on a surface...
Delivered by Mon 23 Nov
SparkFun SOIC to DIP Adapter - 28-Pin
SKU: SF-BOB-00496 | Brand: SparkFun
The SparkFun SOIC to DIP Adapter converts 28-pin SOIC surface-mount packages to standard 0.1" through-hole headers, making it easy to prototype with SMD ICs on breadboards or in DIP sockets. Key Features 28-Pin SOI...
Delivered by Mon 23 Nov
SparkFun RedBot Sensor - Line Follower
SKU: SF-SEN-11769 | Brand: SparkFun
The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measurin...
Delivered by Mon 23 Nov
Thermocouple Type-K - Glass Braid Insulated (Bare Wire)
SKU: SF-SEN-00251 | Brand: SparkFun
36" high temperature Type-K Thermocouple with glass braid insulation.
Delivered by Mon 23 Nov
SparkFun Rotary Encoder Breakout - Illuminated (RG/RGB)
SKU: SF-BOB-11722 | Brand: SparkFun
This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a foo...
Delivered by Mon 23 Nov
Input Shield for Arduino
SKU: DF-DFR0008 | Brand: DFRobot
The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface...
Delivered by Mon 23 Nov
Mini Tamiya Plug with 10cm Leads, Male
SKU: PL-2179 | Brand: Pololu
This connector, a smaller version of the male Tamiya plug, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that ...
Delivered by Mon 23 Nov
SparkFun Blynk Board - ESP8266
SKU: SF-WRL-13794 | Brand: SparkFun
Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB controllers to their phone. The SparkFun Blynk Board is specially designed to work with th...
Delivered by Mon 23 Nov
2.4GHz Ceramic Chip Antenna
SKU: SF-WRL-00144 | Brand: SparkFun
A tiny 2.4 GHz ceramic chip antenna designed for surface-mount PCB layouts. While it won't match the range of a full-size rubber duck antenna, its extremely compact footprint lets you add wireless capability to space-...
Delivered by Mon 23 Nov
Gravity: Joystick Module V2
SKU: DF-DFR0061 | Brand: DFRobot
The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intui...
Delivered by Mon 23 Nov
SparkFun Block for Intel Edison - ADC
SKU: SF-DEV-13770 | Brand: SparkFun
The Intel® Edison is an ultra-small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing t...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared