AltIMU-10 v5 Gyro, Accelerometer, Compass, and Altimeter (LSM6DS33, LIS3MDL, and LPS25H Carrier)
SKU: PL-2739 | Brand: Pololu
The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent ...
Delivered by Mon 23 Nov
Adafruit DotStar Digital LED Strip - Black 30 LED - Per Meter [BLACK]
SKU: AF-2237 | Brand: Adafruit
The Adafruit DotStar Digital LED Strip (30 LED/m, black flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing r...
Delivered by Mon 23 Nov
Arduino Pro Mini 328 - 5V/16 MHz
SKU: AF-2378 | Brand: Adafruit
The Arduino Pro Mini is SparkFun's minimal design approach to Arduino. It's essentially a 5v Arduino that runs an 16 MHz bootloader on a super small, super thin board. There are no connectors attached -...
Delivered by Mon 23 Nov
Getting Started with Adafruit FLORA
SKU: AF-1839 | Brand: Adafruit
Making Wearables with an Arduino-Compatible Electronics PlatformThis book introduces readers to building wearable electronics projects using Adafruit's tiny FLORA board: at 4.4 grams, and only 1.75 inches in diameter...
Delivered by Mon 23 Nov
Pololu 38 kHz IR Proximity Sensor, Fixed Gain, High Brightness
SKU: PL-2578 | Brand: Pololu
This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This high-brightness version draws an average of 16 mA at 5&...
Delivered by Mon 23 Nov
Sharp GP2Y0A21 IR Distance Sensor (10-80cm) For Arduino
SKU: DF-SEN0014 | Brand: DFRobot
The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than o...
Delivered by Mon 23 Nov
Zumo Robot for Arduino, v1.2 (Assembled with 75:1 HP Motors)
SKU: PL-2510 | Brand: Pololu
Overview A Zumo robot preparing to attack a Parallax SumoBot. Zumo Robot for Arduino, v1.2. This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such...
Delivered by Mon 23 Nov
DB9 Male Connector For RS232/RS422/RS485
SKU: DF-FIT0108 | Brand: DFRobot
A solder-tail DB9 male connector for serial communication interfaces including RS-232, RS-422, and RS-485. This is one of the most widely used connectors for serial data links in industrial, embedded, and legacy compu...
Delivered by Mon 23 Nov
micro:bit Go (On-the-go Starter Bundle)
SKU: DF-KIT0130 | Brand: DFRobot
micro:bit is a pocket-sized microcontroller designed for kids and beginners learning how to program, letting them easily bring ideas into DIY digital games, interactive projects and robotics.micro:bit comes with a var...
Delivered by Mon 23 Nov
VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max
SKU: PL-2490 | Brand: Pololu
This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for rangi...
Delivered by Mon 23 Nov
Jumper Cap (600pcs)
SKU: DF-FIT0140 | Brand: DFRobot
These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers. Commonly used to modify settings on a board or device. APPLICATIONS Jumpering pi...
Delivered by Mon 23 Nov
JST 2 Holes Female Connector
SKU: DF-FIT0148 | Brand: DFRobot
This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 2-pin 2.0mm mating connector housing 28-26 AWG crim...
Delivered by Mon 23 Nov
PCB of Arduino LCD Keypad Shield
SKU: DF-DFR0009-BP | Brand: DFRobot
This is the back panel pcb of 1602 Arduino LCD Shield. This shield allows you to place your own LCD onto this shield. It only requieres a 16x2 HD44780 compatible LCD. This Shield uses Arudino LCD4Bit library. ...
Delivered by Mon 23 Nov
SparkFun Environmental Combo Breakout - CCS811/BME280 (Qwiic)
SKU: SF-SEN-14348 | Brand: SparkFun
The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality sensing needs with the popular CCS811 and BME280 ICs. This unique breakout provides a variety of environmental data, i...
Delivered by Mon 23 Nov
Vishay TSSP58P38 IR Detector Module, 38kHz, Automatic Gain (3-Pack)
SKU: PL-2463 | Brand: Pololu
The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter an...
Delivered by Mon 23 Nov
Gravity:Digital Infrared Distance Sensor (10cm)
SKU: DF-SEN0042 | Brand: DFRobot
A compact digital infrared distance sensor from DFRobot's Gravity range, designed for edge detection and close-range proximity sensing. It detects objects within 1–10 cm and outputs a simple digital HIGH/LOW signal — ...
Delivered by Mon 23 Nov
Photon Stackable Header - 12 Pin
SKU: SF-PRT-14322 | Brand: SparkFun
These stackable headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great deal of connectivity to your next Photon project. Each order includes one 1x12 stackable header...
Delivered by Mon 23 Nov
Mini Bread Board Self Adhesive - Green
SKU: DF-FIT0008-G | Brand: DFRobot
This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices of different colors. SP...
Delivered by Mon 23 Nov
USB Serial Light Adapter - Atmega8U2 (Arduino Compatible)
SKU: DF-DFR0164 | Brand: DFRobot
This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no ...
Delivered by Mon 23 Nov
LED - Infrared 950nm
SKU: SF-COM-09349 | Brand: SparkFun
This is a very simple, clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (s...
Delivered by Mon 23 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared