Brands and Manufacturers

SKU: DF-FIT0731 | Brand: DFRobot

NOTE: This product compatible with Raspberry Pi 3 Model B+, Raspberry Pi 4 Model B, and Jetson Nano.              Not compatible with Raspberry Pi 400, Raspberry Pi Pico and Raspber...

SKU: DF-FIT0850 | Brand: DFRobot

This NPN to PNP signal converter module bridges the gap when your sensor outputs an NPN signal but your controller or PLC expects a PNP input. Simply wire it inline between the sensor and the controller to convert the...

SKU: DF-SEN0326 | Brand: DFRobot

The binocular camera module features dual onboard OV2640 cameras, 2MP pixels, 60mm binocular distance, compatible with standard 24P camera. It is suitable for AI vision applications like depth vision and stereo vision...

SKU: DF-SEN0486 | Brand: DFRobot

This highly integrated QR code scanner with excellent performance can recognize common 1D codes and 2D codes. With a small size, it employs easy-to-connect Gravity Interface and is equipped with a colorful indicator t...

SKU: DF-FIT0821 | Brand: DFRobot

A 4-port RS-485 bus hub with optical isolation and surge protection, designed for industrial environments with complex electromagnetic interference. Each port is independently opto-isolated at 2500 V and protected aga...

SKU: DF-TEL0140 | Brand: DFRobot

A simple 433 MHz RF wireless switch set that transmits digital signals between a transmitter and receiver module. Based on Gravity interface connectors, it works with any microcontroller that can read and write digita...

SKU: DF-FIT0790 | Brand: DFRobot

A pack of four coreless micro motors measuring 6 × 10 mm, capable of reaching 55,000 RPM at 3.7V. Slightly larger than the 4 × 12 mm variant, these motors offer a wider shaft (0.8 mm) for improved propeller compatibil...

SKU: DF-DFR0300-H | Brand: DFRobot

Gravity: Analog Electrical Conductivity Sensor / Meter(K=10) OverviewDFRobot Gravity: analog electrical conductivity sensor/meter(K=10) is particularly used to measure the high electrical conductivity liquid, such as ...

SKU: DF-DFR0785-B | Brand: DFRobot

This is a simple LED-illuminated switch button with a transparent cap. It’s just like a basic switch button, but it lights up color(red/ yellow/ green/ blue/ white) when pressed down, which gives you visual feedback. ...

SKU: DF-KIT0176 | Brand: DFRobot

The Gravity I2C 1 kg Weight Sensor Kit is a complete scale-building kit that includes a load cell, HX711 signal adapter board, acrylic mounting bracket, and all hardware needed to measure weight from 1 g to 1,000 g. T...

SKU: DF-SEN0464 | Brand: DFRobot

As an upgraded version of Industrial Gravity: ORP Sensor Meter For Arduino, this new generation ORP probe employs platinum indicator electrode and silver-silver chloridereference electrode, which makes it available fo...

SKU: DF-SEN0456 | Brand: DFRobot

This is a Arduino compatible pressure sensor module with a measuring range of 15-700kPa, which supports I2C digital output and can be calibrated according to known pressure values and allows fast and accurate measurem...

SKU: DF-SEN0325 | Brand: DFRobot

A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and...

SKU: DF-FIT0866 | Brand: DFRobot

These solderless 4-pin LED strip connector cables have a snap-down connector on one end and DuPont-style female headers on the other, making it easy to connect an RGB LED strip directly to a microcontroller or driver ...

SKU: DF-FIT0868 | Brand: DFRobot

This solderless 90° right-angle LED strip connector lets you join two sections of 4-wire RGB LED strip around corners, curves, and angles without soldering. The snap-down connectors on both ends provide firm, reliable...

SKU: DF-FIT0677 | Brand: DFRobot

An aluminium alloy heatsink enclosure for the LattePanda V1 single board computer. The all-metal construction with black anodised and sandblasted finish provides excellent durability and a professional appearance. The...

SKU: DF-FIT0784 | Brand: DFRobot

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards fro...

SKU: DF-FIT0783 | Brand: DFRobot

A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing D...

SKU: DF-FIT0864 | Brand: DFRobot

These solderless 4-pin snap-down connector cables make it easy to bridge a gap between two pieces of cuttable RGB LED strip without soldering. Each cable has a snap-down connector on both ends with a wire in between, ...

SKU: DF-DFR0914 | Brand: DFRobot

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 5V, making it easy to interface industrial sensors and PLC outputs with Arduino and other 5V microcontrollers. Each channel fe...