Brands and Manufacturers

SKU: AF-4913 | Brand: Adafruit

The Adafruit Mini Skinny NeoPixel LED Strip in Warm White 3000K combines full RGB colour with a dedicated warm white LED element in each pixel. With 60 RGBW LEDs per metre on a flexible black PCB, it delivers vibrant ...

SKU: AF-5159 | Brand: Adafruit

The Adafruit TCA4307 Hot-Swap I2C Buffer protects your main I2C bus from glitches caused by hot-plugging STEMMA QT / Qwiic peripherals. I2C wasn't designed for hot-swapping, and plugging or unplugging at the wrong mom...

SKU: AF-4600 | Brand: Adafruit

The Adafruit QT Py SAMD21 is the original QT Py — a tiny development board built around the ATSAMD21E18 (ARM Cortex-M0+ at 48 MHz) with native USB, a STEMMA QT connector, and an RGB NeoPixel. It's the same chip found ...

SKU: AF-4888 | Brand: Adafruit

The Adafruit ItsyBitsy RP2040 brings the Raspberry Pi RP2040 to the compact ItsyBitsy form factor. Featuring a dual-core Cortex M0+ running at 125 MHz, 264 KB RAM, and 8 MB of SPI Flash, it packs serious power into a ...

SKU: SF-CAB-18079 | Brand: SparkFun

This is a handy cable for connecting a six pin GHR-06V type locking connector to breadboard friendly male pins. The six male pins that terminate one side of the cable feature a 1.25mm pitch while the GHR-06V JST is ty...

SKU: SF-CAB-18080 | Brand: SparkFun

This is a 4-pin JST-ZHR cable that's terminated on the end with breadboard compatible Dupont connectors. The four male pins that terminate one side of the cable feature a 1.5mm pitch while the JST-ZHR JST provides a s...

SKU: SF-DEV-17712 | Brand: SparkFun

With a 32-bit ARM® Cortex®-M4 RISC core, the SparkFun STM32 Thing Plus brings power and precision to your projects. The STM32 Thing Plus provides you with an economical and easy to use development platform if you're ...

SKU: SF-WRL-18430 | Brand: SparkFun

The SparkFun MicroMod ESP32 Function Board adds additional wireless options to MicroMod Processor Boards that do not have that capability. This special function board acts as a coprocessor that takes advantage of Espr...

SKU: SF-KIT-18577 | Brand: SparkFun

The SparkFun Tinker Kit (STK) is a great way to get started with programming and hardware interaction with the Arduino programming language. This latest version of the STK adds in the Qwiic functionality. Each Spar...

SKU: DF-FIT0820 | Brand: DFRobot

Here comes a case that can hold the Raspberry Pi and the screen together.It consists of a metal case with a frosted tactile feel and a 3.5-inch TFT touch screen.The touch screen has a resolution of 480x320 and a refre...

SKU: AF-5022 | Brand: Adafruit

The Adafruit Proximity Trinkey is a tiny USB-A development board built around the APDS9960 multi-function sensor and an ATSAMD21 microcontroller. Plug it into any USB port and you instantly have proximity, colour, amb...

SKU: SF-DEV-17745 | Brand: SparkFun

The SparkFun Thing Plus - RP2040 is a low-cost, high performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the Thing Plus or Feather footprint (w...

SKU: AF-4907 | Brand: Adafruit

A pack of 10 USB-C jack connectors designed for power-only applications. These sturdy metal connectors feature four through-hole mounting tabs that make them extremely difficult to rip off a PCB. They also work in SMT...

SKU: PR-PIM540 | Brand: Little Bird

Connect some LEDs (and a battery) up to this little square board and watch them blink! SDB also functions as a handy power switch for papercrafts, cards and wearables. Super Dinky Blinky has terminals designed to acco...

SKU: LB-LS2925 | Brand: Little Bird

USB male to 2 Female cable 30cm Type#1

SKU: LB-FINCH-5 | Brand: Little Bird

Bulk pack of 5The Little Bird Finch is our smallest programmable board. The Finch is a tiny little  board designed to add flashy functionality to your project without taking up a lot of room. It has an ...

SKU: AF-5026 | Brand: Adafruit

This mounting plate kit is an affordable, simple solution to mounting your Raspberry Pi 4 or Model 3 B+ to your Raspberry Pi HQ Camera.  Easy to assemble, the plate attaches to your HQ Camera on one sid...

SKU: DF-DFR0760 | Brand: DFRobot

The Gravity Speech Synthesis Module converts text to spoken audio in English and Chinese, including mixed-language content. It connects via I2C or UART using the standard Gravity interface and includes a built-in spea...

SKU: AF-4955 | Brand: Adafruit

Kailh White clicky mechanical key switches with Cherry MX compatibility. These switches deliver a tactile bump and audible click on each keystroke, providing satisfying feedback for typing and custom keyboard builds. ...

SKU: SF-DEV-17725 | Brand: SparkFun

The SparkFun MicroMod Update Tool is built to interface with the MicroMod Asset Tracker Carrier Board and also makes it simple to communicate directly with the u-blox SARA-R510M8S module using u-blox’s sophisticated m...