Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Interface Cable - RP-SMA Male to RP-SMA Female (1M, RG174)
SKU: SF-CAB-22036 | Brand: SparkFun
An RP-SMA (Reverse Polarity Sub-Miniature A) extension cable with male-to-female connectors and RG174 coaxial housing. Ideal for mounting an antenna to the outside of an enclosure while keeping the electronics inside....
Delivered by Mon 7 Sep
Cockatoo - Micro:bit simple screw-terminal breakout
SKU: LB-COCKATOO | Brand: Little Bird
The Cockatoo is a simple screw-terminal breakout board for the BBC micro:bit. Slide your micro:bit into the edge connector and you get secure screw terminal access to pins 0, 1, 2, 3.3V, and GND — no soldering or croc...
Delivered by Thu 10 Sep
Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)
SKU: SF-CAB-22037 | Brand: SparkFun
A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable R...
Delivered by Mon 7 Sep
GNSS Multi-Band L1/L2/L5 Surveying Antenna - TNC (SPK6618H)
SKU: SF-GPS-21801 | Brand: SparkFun
The SPK6618H is the latest advancement in GNSS antenna technology allowing tri-band (L1/L2/L5) reception for GPS, GLONASS, Galileo, and BeiDou constellations. These 'UFO' antennas have incredible performance for the m...
Delivered by Mon 7 Sep
Adafruit CAN Bus FeatherWing - MCP2515
SKU: AF-5709 | Brand: Adafruit
The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...
Delivered by Thu 27 Aug
Gravity: LTR390 UV Light Sensor (280nm to 430nm) - I2C & UART
SKU: DF-SEN0540 | Brand: DFRobot
The Gravity LTR390-UV sensor provides both ambient light and UV sensing with a UV spectral response from 280nm to 430nm. It features high sensitivity, quick response, and strong anti-interference performance. With a ...
Delivered by Mon 7 Sep
SparkFun USB-C Host Shield
SKU: SF-DEV-21247 | Brand: SparkFun
The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...
Delivered by Thu 27 Aug
Adafruit ESP32-S3 Reverse TFT Feather
SKU: AF-5691 | Brand: Adafruit
The Adafruit ESP32-S3 Reverse TFT Feather places a 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the back of the board, making it ideal for panel-mounted projects where the screen faces outward through an e...
Delivered by Fri 18 Sep
Gravity: CH423 I2C 24 Digital IO Expansion Module
SKU: DF-DFR0979 | Brand: DFRobot
The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrup...
Delivered by Thu 27 Aug
Woven USB A Cable with Magnetic Tips - Micro B, Type C, and iOS
SKU: AF-5652 | Brand: Adafruit
Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Syn...
Delivered by Thu 27 Aug
Adafruit PCA9546 4-Channel I2C Multiplexer
SKU: AF-5663 | Brand: Adafruit
Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a ...
Delivered by Fri 18 Sep
LattePanda DC 5.5x2.1mm Power Cable
SKU: DF-FIT0903 | Brand: DFRobot
The cable is compatible with LattePanda 2 Alpha&Delta, and LattePanda 3 Delta 864.With the DC 5.5x2.1mm Power Cable, LattePanda can be powered by a common 12V DC power supply or a 12V battery pack easily. Feat...
Delivered by Mon 7 Sep
Rainbow Allen Wrench / Hex Key Set - Metric 9 Piece
SKU: AF-5473 | Brand: Adafruit
Why settle for a boring old hex key set when you can get one with a burst of color like this 9 Piece Rainbow Metric Allen Wrench / Hex Key Set. If your DIY project has hexagonal screws, you’re gonna need hex keys (als...
Delivered by Fri 18 Sep
Adafruit PCF8575 I2C 16 GPIO Expander Breakout
SKU: AF-5611 | Brand: Adafruit
The Adafruit PCF8575 GPIO Expander Breakout is an affordable 16-channel I2C GPIO expander that doubles your available digital I/O over a simple two-wire connection. Add extra buttons, LEDs, relays, or other digital pe...
Delivered by Fri 18 Sep
Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic
SKU: AF-5610 | Brand: Adafruit
The Adafruit LTR-303 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configura...
Delivered by Fri 18 Sep
Magnetic Right Angle USB Type C Adapter - 120W Data and Power
SKU: AF-5521 | Brand: Adafruit
A magnetic right-angle USB-C adapter that handles up to 120 W of power and supports data transfer. Insert the magnetic nub into your device's USB-C port, then snap your cable onto it magnetically — giving you a quick-...
Delivered by Fri 18 Sep
LED Filament - 3V 26mm long - Warm White 3 Pack
SKU: AF-5505 | Brand: Adafruit
These non-flexible LED filaments are often seen in 'Edison-like' LED bulbs, arranged in different patterns to give a bright warm lighting effect. They're made of dozens of micro LED diodes that are bonded together ...
Delivered by Fri 18 Sep
nOOds - Flexible LED Filament - 3V 300mm long - Blue
SKU: AF-5508 | Brand: Adafruit
Our favorite food when hacking on code or electronics is a hot bowl of noodles - and around NYC these are often called 'noods'! What we've got here are flexible LED noodles, in different lengths and colors. All are no...
Delivered by Fri 18 Sep
Gravity: Liquid Flow Sensor (G3/4)
SKU: DF-SEN0551 | Brand: DFRobot
This Gravity: liquid flow sensor is designed based on the electromagnetic principle. It adopts O-ring rubber seal and uses silicone sealant at the outlet end to strength water-resistance. With high anti-interference a...
Delivered by Thu 27 Aug
3mm SC-SC Single Mode Duplex Fiber Jumper (3m)
SKU: DF-TEL0155 | Brand: DFRobot
A 3-metre single-mode duplex fibre optic patch cable with SC connectors on both ends. The cable uses 9/125µm (G652D) single-mode fibre with ceramic ferrules and PBT protective shells, delivering low insertion loss and...
Delivered by Mon 7 Sep
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
