Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Gravity: I2C LCD1602 Arduino LCD Display Module (Green)
SKU: DF-DFR0556 | Brand: DFRobot
A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD...
Delivered by Tue 13 Oct
Through-Hole Resistors - 4.7K ohm 5% 1/4W - Pack of 25
SKU: AF-2783 | Brand: Adafruit
ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 4.7K Ω Resistors. More specifically, they are carbon film,...
Delivered by Wed 4 Nov
Pro Mini board ATMEGA328P 5V/16M
SKU: LB-LR0509A | Brand: Little Bird
Specification:14 Digital input / output port: RX, TX, D2 - D138 analog inputs: A0 - A71 pairs of ports TTL level serial transceiver: RX / TX6 PWM ports: D3, D5, D6, D9, D10, D11Using Atmel AtMega328P-AU MCUSupport...
Delivered by Tue 13 Oct
Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]
SKU: AF-1438 | Brand: Adafruit
The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. D...
Delivered by Wed 4 Nov
5V Electromagnet - 5 Kg Holding Force - P25/20
SKU: AF-3873 | Brand: Adafruit
This 5V electromagnet provides 5kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it suitable for small contr...
Delivered by Wed 4 Nov
Little Bird L3G4200D based 3 Axis Gyro
SKU: LB-LR0401 | Brand: Little Bird
This compact module is built around the L3G4200D, a low-power 3-axis angular rate sensor with temperature data output. It measures the rate of change in rotation on the X, Y and Z axes, making it useful for motion sen...
Delivered by Tue 13 Oct
Adafruit RGB Matrix Bonnet for Raspberry Pi
SKU: AF-3211 | Brand: Adafruit
The Adafruit RGB Matrix Bonnet makes it easy to drive HUB75-type RGB LED matrices directly from your Raspberry Pi. Simply plug the bonnet onto any Pi with a 40-pin GPIO header, connect your matrix via the IDC cable, a...
Delivered by Wed 4 Nov
Gravity: Analog Water Pressure Sensor
SKU: DF-SEN0257 | Brand: DFRobot
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...
Delivered by Tue 13 Oct
Professional Silicone-Tip Solder Sucker
SKU: AF-1597 | Brand: Adafruit
This professional-grade solder sucker features a machined aluminium body and a replaceable silicone rubber tip that won't melt on contact with hot solder joints. The smooth spring-loaded action provides reliable, powe...
Delivered by Tue 13 Oct
SparkFun Qwiic Adapter
SKU: SF-DEV-14495 | Brand: SparkFun
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with you...
Delivered by Thu 22 Oct
JST-PH 2-Pin SMT Right Angle Connector
SKU: AF-1769 | Brand: Adafruit
This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...
Delivered by Tue 13 Oct
On-Off Power Button / Pushbutton Toggle Switch
SKU: AF-1683 | Brand: Adafruit
This latching pushbutton toggle switch provides a simple push on / push off action — press once to turn on, press again to turn off. It delivers a satisfying tactile click and can reliably handle up to 500 mA at up to...
Delivered by Wed 4 Nov
Gravity: Digital Piezo Disk Vibration Sensor
SKU: DF-DFR0052 | Brand: DFRobot
The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.So you can know the...
Delivered by Thu 22 Oct
TCS3200 RGB Color Sensor For Arduino
SKU: DF-SEN0101 | Brand: DFRobot
An RGB colour sensor breakout board based on the TAOS TCS3200 chip, with four built-in white LEDs for illumination. The TCS3200 can detect and measure a wide range of visible colours by converting light intensity to a...
Delivered by Thu 22 Oct
Gravity: Soil Moisture Sensor For Arduino
SKU: DF-SEN0114 | Brand: DFRobot
A resistive soil moisture sensor that reads the water content of surrounding soil by measuring electrical resistance between its two probes. Wetter soil conducts more easily (lower resistance), while dry soil conducts...
Delivered by Tue 13 Oct
Programming the Raspberry Pi: Getting Started with Python [Second Edition]
SKU: AF-1089 | Brand: Adafruit
Program your own Raspberry Pi projects!An updated guide to programming your own Raspberry Pi projects. Learn to create inventive programs and fun games on your powerful Raspberry Pi--with no programming experience req...
Delivered by Wed 4 Nov
Adjustable Compartment Parts Box - 24 compartments
SKU: DF-FIT0211 | Brand: DFRobot
Keep electronic components, screws, and small parts organised with this large parts box featuring up to 24 adjustable compartments. Twenty-one removable dividers let you customise the layout to suit different componen...
Delivered by Thu 22 Oct
Needle Nose Pliers
SKU: SF-TOL-08793 | Brand: SparkFun
Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long.
Delivered by Thu 22 Oct
Reed Switch
SKU: SF-COM-08642 | Brand: SparkFun
This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the ...
Delivered by Tue 13 Oct
Jumper Wires 7.8 F/M (10 Pack)
SKU: DF-FIT0301 | Brand: DFRobot
INTRODUCTIONThese are 7.8"(20cm) long jumper wires terminated as male to female. Use these to jumper from any female header on any board such as Arduino processor. Multiple jumpers can be connected next to one a...
Delivered by Thu 22 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared