Brands and Manufacturers

SKU: AF-2778 | Brand: Adafruit

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give you a higher DC voltage! It's a handy way to power ...

SKU: SF-DEV-14050 | Brand: SparkFun

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for a...

SKU: SF-ROB-12105 | Brand: SparkFun

These enclosures allow you to mount your micro gearmotor to other Actobotics products easily. Once your gearmotor is inserted, you can take advantage of the 0.77” hole pattern. These enclosures have a length of 1.14”,...

SKU: SF-PRT-08613 | Brand: SparkFun

Two pin, compact surface mount connector. We really like the solid locking feeling and high current rating on these small connectors. Documents: Datasheet

SKU: SF-SEN-14049 | Brand: SparkFun

The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temperature range. Over its entire -55°C to +125°C operating range, the devi...

SKU: SF-PRT-08619 | Brand: SparkFun

An empty canvas for electrical enthusiasts! Designed to fit the SFE project enclosures this project board gives you 8x10cm (3.15x3.94") of building space for through-hole components with 2.54mm (100mil) spaced hole...

SKU: DF-DFR0220 | Brand: DFRobot

The Arduino Due is Arduino's first ARM-based development board, powered by the Atmel SAM3X8E — a 32-bit Cortex-M3 processor running at 84MHz. With 54 digital I/O pins, 12 analogue inputs, 2 DAC outputs, and USB-OTG, i...

SKU: DF-SEN0057 | Brand: DFRobot

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtr...

SKU: SF-COM-08530 | Brand: SparkFun

A jumbo 6.5-inch (153mm tall) single-digit 7-segment display in red. This oversized display is visible from over 30 metres away, making it ideal for large-scale scoreboards, countdown timers, and public-facing numeric...

SKU: SF-SEN-14032 | Brand: SparkFun

It’s back! This is the LIDAR-Lite v3, a compact, high-performance optical distance measurement sensor from Garmin™. When space and weight requirements are tight, the LIDAR-Lite v3 soars. The LIDAR-Lite v3 is the ideal...

SKU: AF-2680 | Brand: Adafruit

OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service a...

SKU: AF-2943 | Brand: Adafruit

This anodised aluminium chassis provides a sturdy, lightweight foundation for building your own mini robot rover. With plenty of mounting holes and slots, it's easy to configure for 2-wheel or 4-wheel designs and simp...

SKU: SF-DEV-12049 | Brand: SparkFun

The LilyPad Arduino USB is a sewable microcontroller board built around the ATmega32U4 with native USB support — just plug in a micro-USB cable to program, no external FTDI adapter needed. Officially supported in the ...

SKU: AF-2944 | Brand: Adafruit

An aluminium top plate accessory for the Mini Robot Rover Chassis, adding a second level to your robot platform. Mount electronics, batteries, or sensors on top while keeping the lower chassis clear for motors and wir...

SKU: SF-COM-08348 | Brand: SparkFun

The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...

SKU: DF-TEL0067 | Brand: DFRobot

The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to r...

SKU: SF-PRT-08232 | Brand: SparkFun

A 3-pin polarised male header with standard 0.1" (2.54mm) pin spacing. The keyed design prevents incorrect or reversed connections, making it ideal for power and sensor connections on perfboard and PCB projects. Spec...

SKU: SF-BOB-13994 | Brand: SparkFun

The SparkFun 16-Pin SSOP to DIP Adapter is a small PCB that lets you adapt SSOP packages into a DIP footprint. These small boards are useful for modding and upgrading devices that use 14- and 16-pin DIP ICs, when the ...

SKU: DF-ROB0102 | Brand: DFRobot

The Cherokey 4WD arduino mobile robot is a versatile mobile robot jeep compatible with the most popular microcontrollers like DFRduino UNO R3 - Arduino Compatible, Mega2560 (arduino microcontroller board), Romeo V...

SKU: SF-PRT-08100 | Brand: SparkFun

Individual crimp pins for use with polarized connector housings. These pins prevent incorrect or reversed connections, making them ideal for power, sensor, and general-purpose wiring on perfboard and PCB projects. At...