Brands and Manufacturers

SKU: SF-ROB-10848 | Brand: SparkFun

These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear m...

SKU: SF-PRT-10853 | Brand: SparkFun

This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all of those pesky pins. Integrating these connectors into your projects ma...

SKU: AF-443 | Brand: Adafruit

For really big projects, give yourself some room to work in, with a massive 2250-point breadboard - equivalent in size to three full sized breadboards side by side.The breadboards are mounted onto a metal plate, and ...

SKU: AF-454 | Brand: Adafruit

You will squeak with delight when you hold this adorable miniature LED 8x8 matrix. 0.8" square, it's got everything a big LED matrix has, but bite-sized! There are 16 pins on the side, 8 on each, with 0.1" spacing ...

SKU: AF-462 | Brand: Adafruit

Turn any Arduino into an AVR chip programmer with this shield kit. Designed for burning Arduino bootloaders onto blank ATmega328P chips, it can also be configured as a standalone AVR ISP programmer that works without ...

SKU: AF-460 | Brand: Adafruit

Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 2-wire versi...

SKU: AF-415 | Brand: Adafruit

EL tape is the flat, wide cousin of EL wire — same glowing effect but in a 1cm-wide strip format. The glowing surface is 1cm wide (plastic coating is about 1.5cm), with adhesive on the back for easy mounting. Covered ...

SKU: AF-475 | Brand: Adafruit

This 30mm translucent green arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no ...

SKU: SF-WRL-13002 | Brand: SparkFun

This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is constructed of stainless steel and features an SMA male...

SKU: AF-3270 | Brand: Adafruit

Adafruit offers fun and exciting stickers for achievement in electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a sticker is just one of the...

SKU: SF-CAB-10759 | Brand: SparkFun

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Woul...

SKU: AF-498 | Brand: Adafruit

This is a fancy upgrade to standard 20x4 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a dark/black background! That means you can change the character displa...

SKU: SF-PRT-10739 | Brand: SparkFun

Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Note: These are sold as a...

SKU: SF-PRT-10687 | Brand: SparkFun

A 33-metre roll of polyimide (Kapton-style) tape that withstands temperatures up to 258°C (496°F). This high-temperature adhesive tape is an excellent electrical insulator with good corrosion resistance, and its silic...

SKU: AF-499 | Brand: Adafruit

This 20×4 character LCD features black text on a full-colour RGB backlight that you can set to any colour — red, green, blue, purple, teal, white, and everything in between. It's the most daylight-readable character L...

SKU: AF-3315 | Brand: Adafruit

A 2.4" TFT touchscreen display shield for the Adafruit Feather ecosystem. Featuring a 320×240 pixel display with 16-bit colour, a resistive touchscreen, and a built-in microSD card slot, this FeatherWing adds a full i...

SKU: DF-SEN0185 | Brand: DFRobot

INTRODUCTION what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right! This Hall sensor knows whether there is a magne...

SKU: DF-SEN0186 | Brand: DFRobot

INTRODUCTION  Ever want to build your own weather station? This iot weather station kit includess anemometer, wind vane and rain bucket. The serial communication method provides good compatibility and ma...

SKU: AF-512 | Brand: Adafruit

A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, pro...

SKU: AF-3305 | Brand: Adafruit

The Adafruit TFT 50-Pin to 40-Pin + AR1100 Touchscreen Adapter converts Adafruit RTD266X driver boards with 50-pin TFT connectors to work with 40-pin TFT displays. It also includes a built-in AR1100 resistive touch co...