Brands and Manufacturers

SKU: DF-FIT0550 | Brand: DFRobot

Dedicated Design, Superior Texture Titan case uses conflict aesthetics to combine functional design considerations with sci-fi elements. Understated color selection and layered surface treatment technology create a...

SKU: DF-FIT0551 | Brand: DFRobot

This 7" IPS touch display connects to the LattePanda Alpha and LattePanda Delta via eDP (Embedded DisplayPort) interface. With 1024×600 resolution, 178° viewing angle, and high colour saturation, it delivers excellent...

SKU: DF-FIT0552 | Brand: DFRobot

Run your LattePanda on a PC in pip(Picture in Picture) mode at the speed of light. Appreciating that we need a better way to interact between different platforms, the Streaming Cable enables your LattePanda to act lik...

SKU: DF-SEN0298 | Brand: DFRobot

This is a circular flexible thin film pressure sensor of long legs with a diameter of 7.6mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static and ...

SKU: DF-SEN0299 | Brand: DFRobot

The RP-L-400 is a long, flexible thin-film pressure sensor with a 400 mm active length. It detects both static and dynamic pressure by converting applied force into a variable resistance — resistance decreases as pres...

SKU: AF-4369 | Brand: Adafruit

The Adafruit PCT2075 Temperature Sensor is a precise, affordable I2C temperature sensor and a drop-in replacement for the classic LM75. With an 11-bit ADC (compared to the LM75's 9-bit), it delivers finer temperature ...

SKU: DF-DFR0600 | Brand: DFRobot

PYNQ-Z2 is a FPGA development board based on ZYNQ  XC7Z020 FPGA, intensively designed to support PYNQ, a new open-sources framework that enables embedded programmers to explore the possibilities of xilinx ZYNQ...

SKU: SF-WRL-15574 | Brand: SparkFun

The SparkFun Thing Plus - Artemis combines the powerful Artemis module with the popular Thing Plus footprint and Feather-compatible pinout. With 1MB flash, 384KB RAM, Bluetooth, and a built-in digital MEMS microphone,...

SKU: DF-SEN0256 | Brand: DFRobot

The DFRobot TS01 is a non-contact infrared temperature sensor that measures surface temperature via infrared radiation. The all-metal IP65 housing provides protection against impact, water, and dust, making it suitabl...

SKU: DF-SEN0264 | Brand: DFRobot

DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface temperature without touching. The built-in temperatu...

SKU: DF-SEN0281 | Brand: DFRobot

The MB1260 XL-MaxSonar-EZL0 sensor features centimeter resolution and a 10Hz read rate, and provides short to long distance detection, range information from 25cm to 1068cm. Besides, this sensor has the widest and mos...

SKU: DF-SEN0283 | Brand: DFRobot

The MB7139 XL-TrashSonar-WR is a weather-resistant ultrasonic sensor specifically designed for waste bin fill-level monitoring. It measures the distance to the nearest target from 20 cm to 350 cm with centimetre resol...

SKU: DF-SEN0282 | Brand: DFRobot

The MB7076 XL-MaxSonar-WRLA1 is a weather-resistant ultrasonic ranging sensor with centimetre resolution and a 10 Hz read rate. It detects the nearest target from 20 cm to 1068 cm (over 10 metres) and provides three o...

SKU: DF-SEN0268 | Brand: DFRobot

The MB8450 is a weather-resistant ultrasonic car detection sensor with centimetre resolution and a range of 500–5000 mm. It connects via USB Micro-B for simple interfacing and is factory calibrated for reliable long-r...

SKU: SF-SEN-15219 | Brand: SparkFun

The SparkFun Pulse Oximeter and Heart Rate Sensor is an I2C based biometric sensor, utilizing two chips from Maxim Integrated: the MAX32664 Biometric Sensor Hub and the MAX30101 Pulse Oximetry and Heart Rate Module. W...

SKU: AF-4367 | Brand: Adafruit

The TFT Gizmo adds a vibrant 1.54" colour display and audio output to your Circuit Playground board. It bolts directly onto the back of your Circuit Playground using M3 standoffs that provide both mechanical support a...

SKU: AF-4372 | Brand: Adafruit

This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to...

SKU: AF-4346 | Brand: Adafruit

The Adafruit PDM Microphone Breakout with JST SH Connector provides a digital audio input using Pulse Density Modulation (PDM) in a compact, cable-ready form factor. The 4-pin JST SH connector (3V, GND, DAT, CLK) pair...

SKU: AF-4330 | Brand: Adafruit

Here is the perfect kit for mounting convex lenses (glass or plastic) to your Monster M4sk! These acrylics has been laser-cut specifically for lenses with a lip-edge, so we can't guarantee it'll fit with any ol' conve...

SKU: SF-WRL-15454 | Brand: SparkFun

The XBee3 Thing Plus is an ultra-capable and easy way for getting into wireless device development. The combination of XBee and Qwiic in a space-conscious design represents a much-needed update to our XBee offering. W...