Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit Bluefruit LE UART Friend - Bluetooth Low Energy (BLE)
SKU: AF-2479 | Brand: Adafruit
The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during ...
Delivered by Thu 25 Jun
SRF02 ultrasonic sensor
SKU: DF-SEN0005 | Brand: DFRobot
This low cost SFR02 ultrasonic ranger has both I2C and Serial interfaces. New AutoTune algorithms intelligently back the minimum range right up to the transducer ringdown for the very best performance possible, aut...
Delivered by Mon 6 Jul
Toggle Clamp - Medium Flip-up Style
SKU: AF-2456 | Brand: Adafruit
This medium flip-up toggle clamp provides a quick, reliable way to press and hold PCBs firmly in place during testing, soldering, or pogo-pin bed operations. The rounded rubber tip grips securely without marring or da...
Delivered by Wed 15 Jul
Arduino Mega 2560 Rev3
SKU: DF-DFR0108 | Brand: DFRobot
The Arduino Mega 2560 Rev3 is a microcontroller board based on the ATmega2560, offering significantly more I/O than standard Arduino boards. With 54 digital I/O pins, 16 analog inputs, and 4 hardware serial ports, it'...
Delivered by Mon 6 Jul
3-wire Serial LCD Module (Arduino Compatible)
SKU: DF-DFR0091 | Brand: DFRobot
A 128 × 64 pixel graphic LCD module based on the ST7920 controller, featuring a blue backlight with white characters. Supports both parallel (8/4-bit) and SPI (3-wire serial) interfaces, with parallel mode set as the ...
Delivered by Mon 6 Jul
SRF10 - The Worlds Smallest Dual Transducer Ultrasonic Ranger
SKU: DF-SEN0008 | Brand: DFRobot
This small sonar ranger from Devantech offers an amazing wide range from 3cm to 6m. The SRF10 is interfaced using the IIC bus. SPECIFICATIONS Voltage-5v Current-15mA Typ. 3mA Standby Frequenc...
Delivered by Mon 6 Jul
Prototyping Plate (Square)
SKU: DF-FIT0101 | Brand: DFRobot
This is a really easy use prototyping plate. Basically you can put everything from Arduino board to sensors, even a motor on top of it. It fits M2-M3 screws. NOTE: This product does not ship with the board shown abov...
Delivered by Mon 6 Jul
3-Wire LED Module 8 Digital (Arduino Compatible)
SKU: DF-DFR0090 | Brand: DFRobot
An 8-digit serial LED display module that uses an SPI (3-wire) interface, requiring only three I/O pins from your Arduino or microcontroller. Multiple modules can be daisy-chained together for longer displays. The fli...
Delivered by Mon 6 Jul
Passive GPS Antenna uFL - 9mm x 9mm -2dBi gain
SKU: AF-2460 | Brand: Adafruit
An ultra-compact passive GPS antenna measuring just 9 × 9 × 6.5 mm, with a 50 mm uFL cable. Ideal for space-constrained projects where a full-size antenna won't fit. Key Features Tiny Form Factor – Only 9 × 9 × 6.5...
Delivered by Wed 15 Jul
Air Quality Monitor (PM 2.5, Formaldehyde, Temperature Humidity Sensor)
SKU: DF-SEN0233 | Brand: DFRobot
A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemica...
Delivered by Thu 25 Jun
Ultrasonic Sensor XL-MaxSonar -WRC1-Water Proof
SKU: DF-SEN0080 | Brand: DFRobot
The XL-MaxSonar-WR sensor provides very short to long-range detection and ranging, in a compact, robust PVC housing, designed to meet IP67 water intrusion, and matches standard electrical 3/4" PCV pipe fittings....
Delivered by Mon 6 Jul
MXChip Microsoft Azure IoT Developer Kit
SKU: DF-DFR0512 | Brand: DFRobot
The MXChip Azure IoT Developer Kit is an Arduino-compatible development board designed for building cloud-connected IoT applications with Microsoft Azure. It features an STM32F412 ARM Cortex-M4F microcontroller, built...
Delivered by Mon 6 Jul
50-pin FPC Extension Board + 200mm Cable
SKU: AF-2571 | Brand: Adafruit
This 50-pin FPC extension board lets you add approximately 22cm of reach to any 50-pin, 0.5mm pitch FPC/FFC connection. The board features two 50-pin flex connectors with a 200mm (20cm) FPC cable included, giving a to...
Delivered by Wed 15 Jul
XBee 2mW Wire Antenna - Series 2 (ZB)
SKU: DF-TEL0020 | Brand: DFRobot
This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. Th...
Delivered by Mon 6 Jul
Gravity: I2C VEML7700 Ambient Light Sensor (0~120Klx)
SKU: DF-SEN0228 | Brand: DFRobot
The Gravity VEML7700 is a high-accuracy digital ambient light sensor that outputs readings directly in lux (lx) over an I²C interface. Built around the Vishay VEML7700 IC, it features a 16-bit ADC, a high-sensitivity ...
Delivered by Mon 6 Jul
LED Voltage Meter (Green)
SKU: DF-DFR0130-G | Brand: DFRobot
This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...
Delivered by Mon 6 Jul
LED Voltage Meter (Red)
SKU: DF-DFR0130-R | Brand: DFRobot
This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...
Delivered by Thu 25 Jun
Flora Sewable 3-Pin JST Wiring Adapter
SKU: AF-2566 | Brand: Adafruit
This product's about as simple as a cup of lemonade on a hot summer day. And, like lemonade, it's just three components! This board is a sewable adapter with a 3-pin JST wiring adapter. It's a perf...
Delivered by Wed 15 Jul
Gravity:Digital RED LED Light Module
SKU: DF-DFR0021-R | Brand: DFRobot
A simple red LED module with a Gravity 3-pin digital interface for plug-and-play connection to Arduino and other microcontrollers via a Gravity IO Expansion Shield. Ideal for beginners learning digital output control....
Delivered by Thu 25 Jun
Adafruit Bluefruit LE SPI Friend - Bluetooth Low Energy (BLE)
SKU: AF-2633 | Brand: Adafruit
The Adafruit Bluefruit LE SPI Friend adds Bluetooth Low Energy connectivity to any microcontroller with just 4–5 GPIO pins. Using SPI instead of UART means no baud rate configuration or flow control to worry about — c...
Delivered by Wed 15 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
