Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
ProtoBoard - Rectangle 2 Double Sided
SKU: DF-FIT0203 | Brand: DFRobot
This is a very basic double sided prototyping board with standard 0.1" spacing through holes and four 3mm diameter mounting holes. There are 22x26 holes in total. Great for quickly prototyping stackable circuit...
Delivered by Mon 7 Sep
Piezo Vibration Sensor - Small Horizontal
SKU: SF-SEN-09198 | Brand: SparkFun
The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user....
Delivered by Mon 7 Sep
Piezo Vibration Sensor - Large with Mass
SKU: SF-SEN-09197 | Brand: SparkFun
A flexible piezo vibration sensor from Measurement Specialties, commonly used for detecting flex, touch, vibration, and shock. The PVDF polymer film generates a small AC voltage (up to ±90 V) when it moves, which can ...
Delivered by Mon 7 Sep
Jumper Wires Premium 6 Mixed Pack of 100
SKU: SF-PRT-09194 | Brand: SparkFun
A mixed pack of 100 premium jumper wires in assorted colours, ideal for breadboard prototyping and connecting to 0.1″ headers. The pack includes 50 male-to-male and 50 female-to-female wires, each 155 mm (6″) long. T...
Delivered by Thu 27 Aug
Pogo Pin w/ Round Tip
SKU: SF-PRT-09173 | Brand: SparkFun
These spring-loaded pogo pins with round tips are ideal for programming jigs, test fixtures, and temporary connections where you don't want to solder permanent headers. The pins fit snugly into standard perfboard hole...
Delivered by Mon 7 Sep
Gravity: Arduino Carbon Monoxide Sensor (MQ7)
SKU: DF-SEN0132 | Brand: DFRobot
INTRODUCTION This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO) concentrations in the air from 20 to 2000ppm. The sensitivity ca...
Delivered by Mon 7 Sep
900MHz Duck Antenna RP-SMA
SKU: SF-WRL-09143 | Brand: SparkFun
A 900/1800MHz dual-band duck antenna with 2dBi gain and an RP-SMA connector. Well suited for XBee 900MHz modules and other 900MHz radio applications. 50-ohm impedance, 105mm long. Specifications Frequency – 900/180...
Delivered by Thu 27 Aug
Microswitch-5A/250V (especially for Ultimaker 3D printer)
SKU: DF-FIT0213 | Brand: DFRobot
This is a very sensitive and stable lever switch which is commomly used in industrial automation projects. But in your DIY projetcs or robots, this is also great for detecting objects. It can be used as a bumper sens...
Delivered by Thu 27 Aug
Jumper Wire - 0.1(housing pin not included)
SKU: DF-FIT0215 | Brand: DFRobot
A 300 mm (12") ribbon cable made of ten colour-coded jumper wires, each with female headers already attached at both ends. The wires can easily be pulled apart for individual use, making them versatile for breadboard ...
Delivered by Mon 7 Sep
Interface Cable SMA to U.FL
SKU: DF-FIT0219 | Brand: DFRobot
The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections. APPLICATIONS Connect Standard SMA Connector for SIM 908 GPS/GPRS/GSM Shield For Ardui...
Delivered by Mon 7 Sep
SparkFun Thumb Joystick Breakout
SKU: SF-BOB-09110 | Brand: SparkFun
This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners.
Delivered by Thu 27 Aug
Monochrome 2.42 128x64 OLED Graphic Display Module Kit
SKU: AF-2719 | Brand: Adafruit
If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display i...
Delivered by Fri 18 Sep
Amphenol FCI Clincher Connector (3 Position, Female)
SKU: SF-COM-14196 | Brand: SparkFun
The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed...
Delivered by Thu 27 Aug
Amphenol FCI Clincher Connector (2 Position, Male)
SKU: SF-COM-14195 | Brand: SparkFun
The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed...
Delivered by Thu 27 Aug
Adafruit Feather 32u4 Basic Proto
SKU: AF-2771 | Brand: Adafruit
The Feather 32u4 Basic Proto is the no-frills member of the Feather 32u4 family, with a built-in prototyping area where you can solder on extra components like buttons, sensors, or connectors without needing a separat...
Delivered by Thu 27 Aug
Carbon Monoxide Sensor (MQ7)
SKU: DF-FIT0227 | Brand: DFRobot
The MQ7 is a simple-to-use Carbon Monoxide (CO) sensor suitable for detecting CO concentrations in the air. It offers a wide detection range from 20 to 2000 ppm, making it ideal for safety monitoring and air quality p...
Delivered by Thu 27 Aug
USB Female Type A SMD Connector
SKU: SF-PRT-09011 | Brand: SparkFun
USB Type ‘A’ Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable. Designed to mount to the UBW32. Documents: Datasheet
Delivered by Thu 27 Aug
Two-sided Compartment Parts Box - 10 compartments
SKU: DF-FIT0214 | Brand: DFRobot
This is a two-sided parts box for securely holding electronic components,screws,wires and any small parts in individual compartments. One side has 4 compartments and the other has 6. It's a great tool to keep your ...
Delivered by Mon 7 Sep
Gas Sensor Breakout
SKU: SF-BOB-08891 | Brand: SparkFun
This breakout board provides a convenient PCB adapter for MQ-series gas sensors (MQ-3, MQ-4, MQ-6, MQ-7, and MQ-8). It converts the sensor's oversized, oddly-spaced pins into a standard breakout format that's easy to ...
Delivered by Thu 27 Aug
AL Heat Sink (With adhesive tape) - 30*30*10mm
SKU: DF-FIT0223 | Brand: DFRobot
A medium-sized aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. T...
Delivered by Mon 7 Sep
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
