Brands and Manufacturers

SKU: AF-592 | Brand: Adafruit

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

SKU: AF-3351 | Brand: Adafruit

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small...

SKU: AF-5323 | Brand: Adafruit

The Adafruit ESP32-S3 Feather with STEMMA QT brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. This version comes with 8 MB flash, 512 KB SRAM, and no PSRAM — suitable fo...

SKU: AF-5046 | Brand: Adafruit

The BME688 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...

SKU: DF-FIT0860 | Brand: DFRobot

This small portable USB isolator with USB2.0 compatibility provides complete isolation between devices.  Featuring a 12Mbps data transmission rate and 2500V isolation voltage, the industrial USB isolator can ...

SKU: LB-LS3450 | Brand: Little Bird

A KCD4 panel-mount rocker switch with ON/OFF two-position operation and four-pin DPST (double pole, single throw) configuration. Rated for 16 A at 250 V AC, it is suitable for power switching in equipment, appliances,...

SKU: EC-RAP40020P | Brand: Elecrow

GPIO Header adapter for the Raspberry Pi 400 computer.Specification: Size: 5.5 x 4.8 cm Weight: 18g Package List: 1 x Raspberry Pi 400 GPIO Header Adapter

SKU: AF-4853 | Brand: Adafruit

This simple Translucent Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, and battery. It's translucent plastic so you ...

SKU: DF-FIT0641 | Brand: DFRobot

This 1-metre USB-A to USB-C cable supports both data transfer and power delivery at up to 5V/3A (15W). It provides a reliable connection for charging and programming USB-C devices including the Raspberry Pi 4B, Jetson...

SKU: AF-4756 | Brand: Adafruit

The Adafruit LTC4311 Active Terminator solves a common I2C problem: running long cables. Standard I2C is designed for short PCB-level connections, but cable capacitance and resistance degrade signals over distance. Th...

SKU: DF-DFR0667 | Brand: DFRobot

This Charger - MicroUSB is designed for single-cell 3.7V lithium battery. With its tiny body, you can easily integrate it into your applications. The charger adopts TP4056X lithium battery charging IC, which guarantee...

SKU: AF-3955 | Brand: Adafruit

This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, ...

SKU: AF-1189 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a  16mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does,...

SKU: AF-1185 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, how...

SKU: LB-LR0045 | Brand: Little Bird

Easily add SD card read/write capabilities to your Arduino projects with this SD card interface module. Designed for simple integration, this module breaks out the standard SD card slot and allows your Arduino to rea...

SKU: DF-DFR0229 | Brand: DFRobot

This is a Micro SD(TF) module from DFRobot. It is compatible with TF SD card (commonly used in Mobile Phone) which is the most tiny card in the market. SD module has various applications such as data logger, au...

SKU: AF-3006 | Brand: Adafruit

The Adafruit MAX98357A I2S Class D Amplifier Breakout is an all-in-one digital audio solution that decodes I2S audio and amplifies it directly to a speaker — no separate DAC required. Delivering up to 3.2W into a 4Ω s...

SKU: SF-PRT-10007 | Brand: SparkFun

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for st...

SKU: DF-FIT0502 | Brand: DFRobot

INTRODUCTION FIT0502(Stereo Enclosed Speaker) is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size ...

SKU: EC-ASA46530A | Brand: Elecrow

DFPlayer Mini is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module can be used alone with battery power supply, speaker and keypad, or through the serial port control, as the A...