Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
NeoPixel FeatherWing - 4x8 RGB LED Add-on For All Feather Boards
SKU: AF-2945 | Brand: Adafruit
The NeoPixel FeatherWing adds a 4×8 matrix of 32 individually addressable RGB LEDs to any Adafruit Feather board. Using Feather stacking headers or female headers, the wing connects directly on top or bottom of your F...
Delivered by Thu 15 Oct
Acrylic UNO Base
SKU: DF-DWG0003 | Brand: DFRobot
A frosted milky-white acrylic base plate for the Arduino UNO and Leonardo. The base mounts underneath the board using nylon standoffs, protecting the underside from contact with work surfaces and giving your setup a c...
Delivered by Mon 26 Oct
RGB LED Breakout (5050)
SKU: DF-DFR0238 | Brand: DFRobot
This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lig...
Delivered by Thu 15 Oct
Metal Pushbutton - Latching (16mm, Red)
SKU: SF-COM-11971 | Brand: SparkFun
This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm thread...
Delivered by Thu 15 Oct
Button Pad 4x4 - LED Compatible
SKU: SF-COM-07835 | Brand: SparkFun
A translucent silicone rubber button pad with 16 buttons in a 4×4 grid. Each button has a hole underneath that accepts a standard 3 mm or 5 mm LED, allowing you to backlight individual buttons with any colour — includ...
Delivered by Thu 15 Oct
Header - 10-pin Female (PTH, 0.1)
SKU: SF-PRT-11896 | Brand: SparkFun
A standard 10-pin female header with 0.1" (2.54 mm) pitch, designed for through-hole soldering. Mates with standard 10-pin male headers for board-to-board connections, breakout boards, and prototyping. Specifications...
Delivered by Thu 15 Oct
LilyPad Simple Power
SKU: SF-DEV-11893 | Brand: SparkFun
The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery a...
Delivered by Thu 15 Oct
LilyPad LED White (5pcs)
SKU: SF-DEV-13902 | Brand: SparkFun
This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-t...
Delivered by Mon 26 Oct
LED - Basic Yellow 3mm
SKU: SF-COM-00532 | Brand: SparkFun
LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard, yellow LED. The lens is 3mm in diameter and it is diffused.
Delivered by Thu 15 Oct
LED - Super Bright Yellow
SKU: SF-COM-00530 | Brand: SparkFun
A super bright yellow 5 mm LED with a clear lens, delivering high-intensity output that's ideal for indicator lights, visual alerts, and hobby electronics projects. The clear lens provides a focused beam with excellen...
Delivered by Thu 15 Oct
Stackable Header - 3 Pin (Female, 0.1)
SKU: SF-PRT-13875 | Brand: SparkFun
This is a simple 3 pin female PTH header. This header is in a configuration that makes it ideal to be used with the MyoWare Muscle Sensor line. Each pin has a spacing of 0.1" in between each other. Documents: Da...
Delivered by Thu 15 Oct
SparkFun SSOP to DIP Adapter - 28-Pin
SKU: SF-BOB-00500 | Brand: SparkFun
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devi...
Delivered by Thu 15 Oct
SparkFun XBee Explorer USB
SKU: SF-WRL-11812 | Brand: SparkFun
This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, att...
Delivered by Thu 15 Oct
Multi USB-RS232-RS485-TTL Converter
SKU: DF-TEL0070 | Brand: DFRobot
A multi-protocol converter board that supports USB, TTL, RS232, and RS485 interfaces. It can convert signals between any two protocols and supports one input to multiple outputs simultaneously — for example, convertin...
Delivered by Mon 26 Oct
Thermistor 10K
SKU: SF-SEN-00250 | Brand: SparkFun
10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...
Delivered by Thu 15 Oct
USB Female Type B Connector
SKU: SF-PRT-00139 | Brand: SparkFun
A USB Type-B female connector with 0.1" pin spacing, suitable for use on development boards and perfboard. The four connection pins fit standard 2.54 mm pitch headers. The two support posts can be accommodated by dril...
Delivered by Mon 26 Oct
Gravity:Terminal Sensor Adapter V2.0
SKU: DF-DFR0055 | Brand: DFRobot
This is universal sensor adapter V2.0, it can be accessed by digital input modules and analog input module. The module with Arduino sensor expansion board, in combination.Improvment compare with the old version,we a...
Delivered by Mon 26 Oct
LED - RGB Clear Common Cathode
SKU: SF-COM-00105 | Brand: SparkFun
Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indic...
Delivered by Thu 15 Oct
Gravity: Arduino Digital Weight Sensor
SKU: DF-SEN0160 | Brand: DFRobot
A digital weight sensor kit based on the HX711 24-bit ADC, capable of measuring up to 1 kg. The HX711 is designed specifically for weight scale applications, interfacing directly with a bridge sensor to deliver precis...
Delivered by Mon 26 Oct
9V battery clip with 5.5mm/2.1mm plug
SKU: AF-80 | Brand: Adafruit
A high-quality 9V battery clip with a pre-assembled 5.5mm/2.1mm centre-positive barrel connector. The moulded plastic clip covers the battery terminals to prevent short circuits, and the barrel plug connects directly ...
Delivered by Thu 15 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared