Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM And 16MB Onboard Flash Memory
SKU: WS-25506 | Brand: Waveshare
Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM and 16MB onboard Flash memory, compatible with Raspberry Pi 40PIN GPIO header RP2040-PiZero Development Bo...
Delivered by Thu 25 Jun
PL2303 USB To UART (TTL) Communication Module Type C Connector
SKU: WS-20645 | Brand: Waveshare
A USB-to-UART (TTL) communication module based on the PL2303GS chip. Connect it to your PC via USB and communicate with microcontrollers, single-board computers, and other TTL-level serial devices. Three LED indicator...
Delivered by Thu 25 Jun
LC76G Multi-GNSS Module, Supports GPS, BDS, GLONASS, Galileo, QZSS
SKU: WS-24370 | Brand: Waveshare
The LC76G is a multi-GNSS positioning module that supports GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS satellite systems. It allows multi-system combined or single-system independent positioning for fast, accurate l...
Delivered by Thu 25 Jun
Right Angle Phillips and Flat Screwdriver Kit
SKU: AF-5739 | Brand: Adafruit
You can now attack just about every kind of box or enclosure that needs undoing with this Right Angle Phillips Head and Flat Head Screwdriver Kit. These right angled screwdrivers are ideal when you want something that...
Delivered by Thu 25 Jun
Pro'sKit SD-3502 6-Piece Precision Screwdriver Set
SKU: LB-SD-3502 | Brand: Little Bird
A six-piece precision Torx screwdriver set from Pro'sKit, featuring AISI 8660 Cr-Mo-V alloy steel blades for durability and hardness. Each screwdriver has a rotating end cap for fine control and a non-slip ABS handle ...
Delivered by Thu 25 Jun
Rubber wheels 30mm x 4 units
SKU: LB-LS3917 | Brand: Little Bird
4 Wheel Set Get your next robotics project in motion with the 4 Wheel Set—an essential component for any small robot or moving platform. Designed with both form and function in mind, this set of four wheels is perfec...
Delivered by Thu 25 Jun
micro:bit XGO Robot Kit
SKU: EF-EF08268 | Brand: ElecFreaks
Bring an AI dog robot into the micro:bit classroom with a kit designed to make robotics and artificial intelligence approachable for students.The XGO robot has 12 DOFs and supports omni-movement, letting it perform in...
Delivered by Thu 25 Jun
RJ-45 Ethernet Round Panel Mount Extension Cable - 30cm
SKU: AF-4215 | Brand: Adafruit
Add a panel-mount Ethernet port to any enclosure without cutting custom shapes. This RJ-45 round panel mount extension cable fits a standard ~30 mm round hole — just drill with a common hole saw, unscrew the plastic n...
Delivered by Thu 25 Jun
Adafruit DS3231 Precision RTC - STEMMA QT
SKU: AF-5188 | Brand: Adafruit
The Adafruit DS3231 Precision RTC with STEMMA QT connectors is a highly accurate I2C real-time clock featuring an integrated temperature-compensated crystal oscillator (TCXO). Unlike standard RTCs that rely on an exte...
Delivered by Thu 25 Jun
RP2040-Plus, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Plus ver.
SKU: WS-20290 | Brand: Waveshare
The RP2040-Plus is a Pico-compatible development board based on the Raspberry Pi RP2040 microcontroller, upgraded with 4 MB onboard flash, a USB-C connector, and a lithium battery charge/discharge header for portable ...
Delivered by Thu 25 Jun
Round 5V LED Matrix Lamp Kit
SKU: KI-2169 | Brand: Kitronik
This round 5V LED matrix lamp Kit offers a really bright light, which is compact and easy to mount. The unit is supplied with 9 white super flux LEDs, which collectively output around 16,000 mCd. The unit incorpora...
Delivered by Thu 25 Jun
TPBot STEM Car - micro bit robot
SKU: EF-EF08230 | Brand: ElecFreaks
TP Bot is a smart programming car for micro:bit. Can it be considered a different robot car because of its pre-defined functions that don't require a micro:bit? It can also be used as a teaching tool at the same time,...
Delivered by Thu 25 Jun
Temperature Sensor Module DS18B20
SKU: LB-24-TEMP | Brand: Little Bird
A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature read...
Delivered by Thu 25 Jun
Maker Case 12cm
SKU: LB-MAKER-ORANGE | Brand: Little Bird
The Maker Case 12cm is a compact zippered pouch designed for carrying small electronics on the go. It fits boards like the Raspberry Pi, micro:bit, Arduino Nano, and similar single-board computers or microcontrollers,...
Delivered by Thu 25 Jun
Little Bird Multi Tool
SKU: LB-MULTI-TOOL | Brand: Little Bird
The Little Bird Multi Tool is a compact, credit-card-sized tool that packs a surprising number of functions into a slim, portable design. Slip it into your wallet or toolbox and have the essentials on hand whenever yo...
Delivered by Thu 25 Jun
Octopus PIR Sensor Brick
SKU: EF-EF04055 | Brand: ElecFreaks
OCTOPUS PIR Sensor module is a type of electronic building block based on AM412 pyroelectric digital smart sensor. It can be used in sensing and detection of human or animal motion, sensing distance is about 4-5 me...
Delivered by Thu 25 Jun
Delivered by Thu 25 Jun
GPIO Ribbon Cable 2x8 IDC Cable - 16 pins 12 long
SKU: AF-4170 | Brand: Adafruit
A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable ...
Delivered by Thu 25 Jun
Kitronik Inventor's Kit for the BBC micro:bit
SKU: KI-5603 | Brand: Kitronik
The Kitronik Inventor's Kit is a comprehensive electronics starter kit designed for the BBC micro:bit. Includes everything you need to complete 12 hands-on experiments using LEDs, motors, LDRs, capacitors, a potentiom...
Delivered by Thu 25 Jun
Gravity: I2C LCD1602 Arduino LCD Display Module (Green)
SKU: DF-DFR0556 | Brand: DFRobot
A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD...
Delivered by Thu 25 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
