Brands and Manufacturers

SKU: SF-PRT-17152 | Brand: SparkFun

These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated into a breadboard circuit or attach a shield on t...

SKU: DF-FIT0664 | Brand: DFRobot

This is a Micro-HDMI (M/F) adapter for Raspberry Pi 4B. It supports 4K high resolution, and provides efficient and stable signal transmission without attenuation and delay. Plug and play, easy to use. With this adapte...

SKU: SF-SEN-15901 | Brand: SparkFun

This Weather Meter Kit provides the three core sensors for a DIY weather station: an anemometer (wind speed), a wind vane (wind direction), and a rain gauge. All three sensors use passive magnetic reed switches rather...

SKU: AF-3960 | Brand: Adafruit

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO gl...

SKU: LB-LR0004 | Brand: Little Bird

Features Model: KY-038 Adopt LM393 main chip Electric condenser microphone Features Single channel signal output Low level output signal used for sound control light Great module for sound alarm system Working voltage...

SKU: AF-900 | Brand: Adafruit

A short USB 2.0 Type-A to Type-B cable, 150 mm (6") in length. Ideal for connecting Arduino boards, programmers, and other USB-B devices to a computer in compact setups where a full-length cable is unnecessary. Key F...

SKU: AF-1012 | Brand: Adafruit

Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to f...

SKU: LB-PTRT | Brand: Little Bird

A 100 cm USB A-to-B cable with a right-angle Type-B connector, ideal for tight spaces where a straight connector won't fit. Works with Arduino Uno, Mega, printers, and other devices that use the standard USB Type-B po...

SKU: EF-EF08200 | Brand: ElecFreaks

          ItemsParametersRemarksNamemicro:bit Experiment Box kitSKUEF08199/EF08200 The boardmicro:bit Coding languagemakecode\python\C++ Power supply2 x A...

SKU: LB-LR0214-4 | Brand: Little Bird

The D1 R2 is a mini wifi board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) A Micro USB connection A power jack, 9-...

SKU: AF-1192 | Brand: Adafruit

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. T...

SKU: AF-1188 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 16mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, how...

SKU: SF-PRT-15101 | Brand: SparkFun

This is a unique two-cell AAA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perf...

SKU: LB-LS0658 | Brand: Little Bird

This is the Raspberry Pi Cascaded plate GPIO Extension board, a board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to jumper wire friendly connectors. The Raspberry Pi Casc...

SKU: AF-1475 | Brand: Adafruit

The Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! However, for when you want better audio for music playback, a USB audio card can greatly i...

SKU: LB-LR0281-1 | Brand: Little Bird

This is our very own TrinityPixel product.....why the funny name....Maddy was in a silly mood! These are WS2812B 5050 RGB LED Strip 5M 60LEDS Waterproof strips of lights. There are 60 RGB LEDs per meter, and you ca...

SKU: AF-1739 | Brand: Adafruit

This large enclosed piezo element (30 mm diameter) converts vibration to voltage and voltage to vibration, making it useful both as a buzzer for generating tones and as a sensor for detecting knocks and impacts. The e...

SKU: SF-DEV-09350 | Brand: SparkFun

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each board are rated for 4 volts at 300mA, but will work at 5 volts with a re...

SKU: SF-DEV-08822 | Brand: SparkFun

A 20 mm coin cell battery holder designed for CR2032 batteries. The holder features a pop-in, pop-out mechanism for easy battery changes, and the mounting feet include small holes for sewing onto fabric — making it su...

SKU: DF-SEN0142 | Brand: DFRobot

A compact breakout board for the MPU-6050, combining a 3-axis gyroscope and 3-axis accelerometer with an onboard Digital Motion Processor (DMP) on a single chip. The integrated DMP handles complex motion fusion algori...