Brands and Manufacturers

SKU: AF-4288 | Brand: Adafruit

Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it d...

SKU: EF-EF09086 | Brand: ElecFreaks

SKU: AF-4170 | Brand: Adafruit

A 16-pin (2×8) IDC ribbon cable with keyed connectors on both ends, 305mm (12") long. The 0.05" pitch ribbon cable connects to standard 2×8 0.1" × 0.1" IDC headers. Pin 1 is marked with a white stripe along the cable ...

SKU: DF-DFR0556 | Brand: DFRobot

A 16×2 character LCD display module from DFRobot's Gravity series, connecting to your Arduino or microcontroller via a simple I²C interface — just two data wires instead of the many parallel connections a standard LCD...

SKU: AF-2783 | Brand: Adafruit

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 4.7K Ω Resistors. More specifically, they are carbon film,...

SKU: AF-1438 | Brand: Adafruit

The Adafruit Motor/Stepper/Servo Shield v2.3 is the upgraded successor to the original Motor Shield, delivering higher current, lower voltage drop, and a fully I2C-based design that frees up your Arduino's PWM pins. D...

SKU: AF-3211 | Brand: Adafruit

The Adafruit RGB Matrix Bonnet makes it easy to drive HUB75-type RGB LED matrices directly from your Raspberry Pi. Simply plug the bonnet onto any Pi with a 40-pin GPIO header, connect your matrix via the IDC cable, a...

SKU: DF-SEN0257 | Brand: DFRobot

The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...

SKU: AF-1597 | Brand: Adafruit

This professional-grade solder sucker features a machined aluminium body and a replaceable silicone rubber tip that won't melt on contact with hot solder joints. The smooth spring-loaded action provides reliable, powe...

SKU: SF-DEV-14495 | Brand: SparkFun

The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with you...

SKU: AF-1769 | Brand: Adafruit

This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...

SKU: AF-1683 | Brand: Adafruit

This latching pushbutton toggle switch provides a simple push on / push off action — press once to turn on, press again to turn off. It delivers a satisfying tactile click and can reliably handle up to 500 mA at up to...

SKU: AF-2217 | Brand: Adafruit

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire u...

SKU: DF-DFR0052 | Brand: DFRobot

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.So you can know the...

SKU: DF-SEN0101 | Brand: DFRobot

An RGB colour sensor breakout board based on the TAOS TCS3200 chip, with four built-in white LEDs for illumination. The TCS3200 can detect and measure a wide range of visible colours by converting light intensity to a...

SKU: DF-SEN0114 | Brand: DFRobot

A resistive soil moisture sensor that reads the water content of surrounding soil by measuring electrical resistance between its two probes. Wetter soil conducts more easily (lower resistance), while dry soil conducts...

SKU: AF-1089 | Brand: Adafruit

Program your own Raspberry Pi projects!An updated guide to programming your own Raspberry Pi projects. Learn to create inventive programs and fun games on your powerful Raspberry Pi--with no programming experience req...

SKU: DF-FIT0211 | Brand: DFRobot

Keep electronic components, screws, and small parts organised with this large parts box featuring up to 24 adjustable compartments. Twenty-one removable dividers let you customise the layout to suit different componen...

SKU: SF-TOL-08793 | Brand: SparkFun

Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long.

SKU: SF-COM-08642 | Brand: SparkFun

This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the ...