Brands and Manufacturers

SKU: SF-GPS-15712 | Brand: SparkFun

The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the ...

SKU: SF-GPS-16329 | Brand: SparkFun

The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. The module provides con...

SKU: SF-DEV-16790 | Brand: SparkFun

The SparkFun Qwiic Shield for Thing Plus adds four Qwiic connectors (two horizontal, two vertical) to any Thing Plus or Adafruit Feather-format development board. It breaks out the I²C bus (GND, 3.3 V, SDA, SCL) to st...

SKU: SF-PRT-16538 | Brand: SparkFun

Poke Home Connectors have been featured on a number of our boards over the last few years by providing a simple screw-terminal-type connector for easy wire connection purposes. Similar to screw terminals, Poke Home Co...

SKU: AF-4441 | Brand: Adafruit

The Garmin LIDAR-Lite V4 LED is a compact, low-power optical distance sensor that measures up to 10 metres using lensed LED light (not a laser, despite the name). Drawing only 85 mA during acquisition with measurement...

SKU: AF-4438 | Brand: Adafruit

The Adafruit LSM6DSOX is a high-quality 6 Degree of Freedom (6-DoF) IMU from ST, combining a triple-axis accelerometer and triple-axis gyroscope on a single chip. Beyond basic motion sensing, it includes built-in tap ...

SKU: DF-FIT0658 | Brand: DFRobot

This compact 5V inductive proximity switch detects metal objects at distances up to 4mm without physical contact. It features an NPN normally-open output, a fast response time under 1ms, and a 1,000Hz switching freque...

SKU: SF-DEV-16260 | Brand: SparkFun

The Leopard Imaging Camera is a wide-angle camera module designed specifically for the NVIDIA Jetson Nano Developer Kit. With a 136° field of view, Sony IMX219 8.08 MP colour sensor, and CSI-2 MIPI 2-lane interface, i...

SKU: DF-FIT0633 | Brand: DFRobot

Designed for multi-rotor wings, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and allowing full power...

SKU: EF-EF01003 | Brand: ElecFreaks

The Freaduino MEGA2560 is an Arduino MEGA 2560 compatible development board from ElecFreaks. It inherits the same pin layout, screw holes, and dimensions as the official Arduino MEGA 2560, so all existing shields, lib...

SKU: EF-EF04096 | Brand: ElecFreaks

Octopus 3V laser sensor is the laser emission electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the s...

SKU: DF-SEN0328 | Brand: DFRobot

The TF03 is an industrial-grade LiDAR sensor with a detection range of up to 100 m. Using pulsed time-of-flight (ToF) measurement, it delivers high accuracy in a compact 44 × 43 × 32 mm package weighing just 77 g. Its...

SKU: EF-EF02037 | Brand: ElecFreaks

CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BU...

SKU: EF-EF03090 | Brand: ElecFreaks

The Wireless Charging Module can be applied in electronic equipments in common use for close wireless charging or power supply. Consisted of a transmitter and insolation coil, it could serve as a replacement for th...

SKU: EF-EF03012 | Brand: ElecFreaks

A compact 16-channel relay module using HUIKE mini-relays, providing optocoupler-isolated control of up to 16 independent circuits. Despite having 16 channels, the board is close in size to a standard 8-channel relay ...

SKU: EF-EF01001 | Brand: ElecFreaks

Resources: Atmega 328 Datasheet Schematic v1.8 Schematic v2.2 Arduino IDE Arduino UNO Reference Freaduino UNO review,thanks Wilhelm, Mathias Please visit the ElecFreaks wiki page for more info about this product. ...

SKU: SF-PRT-15900 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-PRT-15899 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-PRT-15898 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 2-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: EF-EF03089 | Brand: ElecFreaks

A compact wireless charging module consisting of a transmitter and receiver coil pair, providing stable 5 V output with up to 600 mA current. Designed for close-range wireless power transfer in electronics projects wh...