Brands and Manufacturers

SKU: WS-21176 | Brand: Waveshare

A premium aluminium enclosure for the Raspberry Pi 4, featuring a stripe-grooved design on both top and bottom halves that enlarges the heat dissipation area for effective passive cooling. Built-in heatsink pillars ma...

SKU: AF-5320 | Brand: Adafruit

This book will teach you Python programming and some basic electronics without assuming any prior knowledge of either subject. The book initially focuses on Python programming, building up a Morse Code example using t...

SKU: DF-FIT0701 | Brand: DFRobot

This product is a driver-free camera with 30W pixels and 640*480 resolution. The camera is well compatible with both Raspberry Pi and NVIDIA series mainboards. Just plug it in, and you’re good to go!The compact size o...

SKU: AF-4669 | Brand: Adafruit

Here's one of the easiest capture solutions for getting HDMI data into your computer or Raspberry Pi, really any system with a USB port. Use this capture device to convert a video signal from a camera (or another dev...

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...

SKU: EF-EF08209 | Brand: ElecFreaks

Documents Smart Cutebot kit

SKU: SF-PRT-14490 | Brand: SparkFun

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly...

SKU: SF-DEV-11791 | Brand: SparkFun

This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great...

SKU: SF-COM-11508 | Brand: SparkFun

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-fri...

SKU: AF-3297 | Brand: Adafruit

The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applic...

SKU: AF-592 | Brand: Adafruit

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

SKU: AF-3351 | Brand: Adafruit

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small...

SKU: DF-FIT0860 | Brand: DFRobot

This small portable USB isolator with USB2.0 compatibility provides complete isolation between devices.  Featuring a 12Mbps data transmission rate and 2500V isolation voltage, the industrial USB isolator can ...

SKU: EC-RAP40020P | Brand: Elecrow

GPIO Header adapter for the Raspberry Pi 400 computer.Specification: Size: 5.5 x 4.8 cm Weight: 18g Package List: 1 x Raspberry Pi 400 GPIO Header Adapter

SKU: AF-4853 | Brand: Adafruit

This simple Translucent Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, and battery. It's translucent plastic so you ...

SKU: DF-FIT0641 | Brand: DFRobot

This 1-metre USB-A to USB-C cable supports both data transfer and power delivery at up to 5V/3A (15W). It provides a reliable connection for charging and programming USB-C devices including the Raspberry Pi 4B, Jetson...

SKU: AF-4756 | Brand: Adafruit

The Adafruit LTC4311 Active Terminator solves a common I2C problem: running long cables. Standard I2C is designed for short PCB-level connections, but cable capacitance and resistance degrade signals over distance. Th...

SKU: DF-DFR0667 | Brand: DFRobot

This Charger - MicroUSB is designed for single-cell 3.7V lithium battery. With its tiny body, you can easily integrate it into your applications. The charger adopts TP4056X lithium battery charging IC, which guarantee...

SKU: AF-1189 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a  16mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does,...

SKU: AF-1185 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, how...