Brands and Manufacturers

SKU: AF-1676 | Brand: Adafruit

If you already have a 7" TFT that is about 165mm x 105mm in size (with a visible area equal to or smaller than 152mm x 91mm), you can put this glass resistive overlay over it to add a resistive touch screen. To us...

SKU: AF-1872 | Brand: Adafruit

This 8 MHz ceramic resonator is a breadboard-friendly oscillator with built-in load capacitors, making it a simple drop-in timing source for microcontrollers. With 0.5% accuracy, it's well suited for everyday electron...

SKU: AF-2175 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a flat finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The flat bezel si...

SKU: AF-2262 | Brand: Adafruit

The Adafruit GPIO Reference Card makes it easy to identify and connect wires to the Raspberry Pi's GPIO header. This ultra-thin (0.8 mm) card slides directly onto the 2×13 GPIO header, labelling each pin by function —...

SKU: AF-9 | Brand: Adafruit

Yow! These things are super powerful. 1/2" diameter, 3/16" thick discs, south side is marked with a red line. Great for use with your SpokePOV Kit. If you have an aluminium frame, use tape/foamstickytape to attach it.

SKU: AF-145 | Brand: Adafruit

If you want to make a kit you'll need some solder. This 100g (about 1/4 lb) spool is just the right amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). 0.031" diameter, ...

SKU: AF-3217 | Brand: Adafruit

Does your prototyping project require soldering? Are you looking for something other than your usual run-o'-the-mill solder wire? Look no further! This high quality, low cost, adorably packaged Lead-Free Prototyp...

SKU: AF-3218 | Brand: Adafruit

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure&nbs...

SKU: AF-491 | Brand: Adafruit

A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. It's similar in size to an arcade button (and will fit in holes drilled for 'standard' 30mm buttons) bu...

SKU: AF-2269 | Brand: Adafruit

Interested in learning how Bluetooth Low Energy works down to the packet level? Debugging your own BLE hardware, and trying to spot where something is going wrong? Or maybe you're writing a custom application for y...

SKU: AF-2018 | Brand: Adafruit

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 2x8 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to...

SKU: AF-3537 | Brand: Adafruit

Do you have a S-Video display, projector or monitor that is not compatible with your HDMI devices? Here's an adapter that will allow you to convert HDMI to S-Video, for older video devices that might not have an ...

SKU: AF-6271 | Brand: Adafruit

Here is a handy measurement data display to help you see in real time the load flowing into your devices as they charge via USB-C. You'll have immediate readings of voltages, amps, and watts along with their peaks.Thi...

SKU: AF-6045 | Brand: Adafruit

The FixHub Smart Soldering Iron is the portable soldering solution for your precision soldering work. With USB-C power, this 100W iron heats up in under 5 seconds, giving you full-size soldering performance in a compa...

SKU: AF-5927 | Brand: Adafruit

MAJOR KEY ALERT 🔑🔑🔑 we now stock 'Key Lock Switches'! These mechanical switches don't use a button, lever, or magnet to open and close the contacts. Instead, a literal key is used. This low-cost but effective key loc...

SKU: AF-5783 | Brand: Adafruit

The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your ...

SKU: AF-5533 | Brand: Adafruit

Have you found yourself in a maze of twisty-turny knobs, all alike? These micro potentiometer (or rotary encoder) knobs offer a rainbow burst of color to your synth or control panel. They are made of a hard plast...

SKU: AF-5531 | Brand: Adafruit

This Anodised Aluminium Machined Knob in gold is a premium upgrade for any rotary encoder or potentiometer. Solid machined aluminium with knurled sides for a secure grip and a shiny anodised finish that looks right at...

SKU: AF-5434 | Brand: Adafruit

The Pogo Pin Probe Clip with 2x5 0.05" pitch SWD spacing is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with an array of built-in sprin...

SKU: AF-5004 | Brand: Adafruit

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of lavender DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em o...