Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Arcade Button with LED - 30mm Translucent Yellow
SKU: AF-3488 | Brand: Adafruit
This 30mm translucent yellow arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA fro...
Delivered by Tue 13 Oct
Adafruit Perma-Proto Quarter-sized Breadboard PCB - Single
SKU: AF-1608 | Brand: Adafruit
The Adafruit Perma-Proto Quarter-Sized Breadboard PCB mirrors the layout of a tiny solderless breadboard with power rails, making it simple to transfer small prototyped circuits to a permanent soldered board. The comp...
Delivered by Tue 13 Oct
Panel Mount 1K potentiometer (Breadboard Friendly) [1K Linear]
SKU: AF-1789 | Brand: Adafruit
This 1K potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 1K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will ...
Delivered by Tue 13 Oct
Replacement Tubes for Professional Silicone-Tip Solder Sucker [SS-02]
SKU: AF-2476 | Brand: Adafruit
Replacement silicone tubes for the Professional Silicone-Tip Solder Sucker. Cut to your desired length as needed — the elastic, heat-resistant silicone withstands temperatures up to 350°C, letting you get close to you...
Delivered by Wed 4 Nov
Panel Mount 100K potentiometer (Breadboard Friendly) [100KB]
SKU: AF-1831 | Brand: Adafruit
This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 100K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will...
Delivered by Tue 13 Oct
Adafruit Perma Proto Bonnet Mini Kit
SKU: AF-3203 | Brand: Adafruit
The Adafruit Perma-Proto Bonnet Mini Kit is a prototyping daughter board sized for the Raspberry Pi Zero. It plugs directly onto the Pi's 2×20 GPIO header and provides a grid of 0.1″ soldering holes connected in a fam...
Delivered by Tue 13 Oct
Panel Mount 10K Log Potentiometer w/ On-Off Switch [10K Log w/ Switch]
SKU: AF-3481 | Brand: Adafruit
A panel-mount 10 kΩ logarithmic potentiometer with an integrated on/off switch. The logarithmic taper is designed for audio volume control — resistance increases on a curve that matches how the human ear perceives lou...
Delivered by Wed 4 Nov
Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs
SKU: AF-5774 | Brand: Adafruit
The Adafruit Swirly Aluminum Mounting Grid provides a mechanical substrate for mounting small microcontroller boards, sensors, and Feathers that use STEMMA QT plug-and-play connections. When you're snapping boards tog...
Delivered by Tue 13 Oct
Anodized Aluminum Machined Knob - Red - 20mm Diameter
SKU: AF-5530 | Brand: Adafruit
This Anodised Aluminium Machined Knob in cherry red is a premium upgrade for any rotary encoder or potentiometer. Solid machined aluminium with knurled sides for a secure grip and a shiny anodised finish that looks ri...
Delivered by Wed 4 Nov
Line Laser Diode - 5mW 650nm Red
SKU: AF-1057 | Brand: Adafruit
You have some frickin' sharks at your lair, and you're thinking "it would be really great if I could attach some lasers to them" and then you see these little laser diode modules: what great timing! These encapsulated...
Delivered by Tue 13 Oct
Large Arcade Button with LED - 60mm Yellow
SKU: AF-1191 | Brand: Adafruit
BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. T...
Delivered by Tue 13 Oct
ITO (Indium Tin Oxide) Coated Glass - 50mm x 50mm
SKU: AF-1310 | Brand: Adafruit
A 50 × 50 mm glass sheet coated on one side with Indium Tin Oxide (ITO) — a transparent, electrically conductive film. The same material is used in LCD/OLED manufacturing and scientific research. Experiment with creat...
Delivered by Wed 4 Nov
Aluminum SMT Heat Sink - 0.25x0.25 square - 0.5 tall
SKU: AF-1493 | Brand: Adafruit
A compact aluminium heat sink designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Its small footprint and tall fin design provide effective thermal dissi...
Delivered by Tue 13 Oct
5mm Plastic Bevel LED Holder - Pack of 5
SKU: AF-2174 | Brand: Adafruit
Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a bevelled finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The bevelled ...
Delivered by Tue 13 Oct
Hand-Moldable Plastic - Low Temperature Thermoplastic [100g Bag]
SKU: AF-2504 | Brand: Adafruit
Low-temperature thermoplastic beads (also known as Polymorph, Instamorph, or Friendly Plastic) that become moldable when heated to approximately 60 °C (140 °F). Simply heat in hot water until the beads turn clear and ...
Delivered by Wed 4 Nov
Chip Quik Tack Flux 10cc Syringe with Plunger and Tip [SMD291]
SKU: AF-2667 | Brand: Adafruit
Chip Quik SMD291 tack flux in a convenient 10 cc syringe with plunger and dispensing tip. This synthetic no-clean flux is ideal for all rework, soldering, desoldering, and reflow applications — it stays where you appl...
Delivered by Wed 4 Nov
Mini Illuminated Momentary Pushbutton - Blue Power Symbol
SKU: AF-3105 | Brand: Adafruit
A compact, breadboard-friendly illuminated tactile switch featuring a blue LED that shines through a universal power symbol on top. Adds both a momentary pushbutton and a colourful indicator to your project in a singl...
Delivered by Wed 4 Nov
Large Modular Snap Box - SMD component storage [Orange]
SKU: AF-434 | Brand: Adafruit
For storing small parts (especially SMT/SMD components), these little modular boxes are ideal. They have individual clear pop-open covers so you can keep only the ones you want open - less risk of mixing up parts or h...
Delivered by Wed 4 Nov
Arcade Button - 30mm Translucent Red
SKU: AF-473 | Brand: Adafruit
This 30mm translucent red arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no st...
Delivered by Tue 13 Oct
Arcade Button - 30mm Translucent Blue
SKU: AF-476 | Brand: Adafruit
This 30mm translucent blue arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no s...
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared