Brands and Manufacturers

SKU: AF-574 | Brand: Adafruit

Put a current meter anywhere with this very handy display. This panel meter requires a DC voltage to run, and then has two thick gauge wires to measure current draw. A shunt is already on board so its very easy to hoo...

SKU: AF-3306 | Brand: Adafruit

Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic blue protective casing, and a diffused blue LED at the tip of the switch, this Blue LED Toggle Switch is s...

SKU: AF-3432 | Brand: Adafruit

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right in! That's right, you'll be button-mashing amidst a ...

SKU: AF-3431 | Brand: Adafruit

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right in! That's right, you'll be button-mashing amidst a ...

SKU: AF-3391 | Brand: Adafruit

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a log taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own...

SKU: AF-818 | Brand: Adafruit

Micro-switches are often found in arcade buttons and joysticks but they're also really handy in any kind of mechatronics project or when you need a basic sensor. They are always 'tactile' (clicky feeling), and 'moment...

SKU: AF-3536 | Brand: Adafruit

This silicone mat is made of 4mm thick rubber and can take just about anything you throw at it. It's stable, strong, non-slip, non-conductive and heat-resistant surface for your workstation. We love it here at Adafrui...

SKU: AF-3482 | Brand: Adafruit

This Panel Mount 10K Dual Logarithmic Potentiometer w/ On-Off Switch is a two-in-one; you get a dual-ganged potentiometer and an on-off switch. For the potentiometer-half, you've got a dual standard log-t...

SKU: AF-4631 | Brand: Adafruit

A pack of four magnetic mounting feet designed for RGB LED matrix panels. At 16.6 mm long, each magnet-screw slots into the standard 3 mm mounting bosses found on most RGB matrix panels, providing a quick and secure w...

SKU: AF-6308 | Brand: Adafruit

Perfect for a variety of small projects, these adhesive squares provide a strong bond to most surfaces and are an excellent way to attach heat sinks to a chip.Each tab is 0.5" (12.7mm) square and 1.25mm thick. You get...

SKU: AF-6261 | Brand: Adafruit

This 60mm square button is large, inviting, and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades. They're easy to mount on nearly any kind of enclosure. They're not water...

SKU: AF-6270 | Brand: Adafruit

This 51mm square button is cute, inviting, and ready for all sorts of pressing and pushing. We've seen these in some games of skill in arcades. They're easy to mount on nearly any kind of enclosure. They're not waterp...

SKU: AF-6274 | Brand: Adafruit

A large 44 mm square illuminated push button with a satisfying clicky micro-switch — commonly seen in arcade games of skill. The black plastic body is easy to mount on panels and enclosures, and the snap-in lamp holde...

SKU: AF-6120 | Brand: Adafruit

A 70mm USB-powered cooling fan that delivers reliable airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can be cut off to wire the...

SKU: AF-6054 | Brand: Adafruit

The Feather Mount for LEGO-Compatible Brick Systems lets you securely attach any standard-sized Feather or FeatherWing board (2" × 0.9" / 51 mm × 23 mm) to LEGO-compatible brick plates. No hot glue, epoxy, or tape nee...

SKU: AF-5972 | Brand: Adafruit

The Adafruit Switchable USB Type A to C Breakout Board lets you individually enable or disable each of the four USB wires (V+, D+, D−, GND) using an onboard 4-position DIP switch. This makes it a versatile tool for US...

SKU: AF-5929 | Brand: Adafruit

MAJOR KEY ALERT 🔑🔑🔑 we now stock 'Key Lock Switches'! These mechanical switches don't use a button, a lever, or a magnet to open and close the contacts. Instead, a literal key is used. This low-cost but effective key...

SKU: AF-5914 | Brand: Adafruit

The Adafruit LTC4316 I2C Address Translator solves one of I2C's most frustrating limitations: address conflicts. When two devices share the same fixed I2C address, this chip performs on-the-fly address translation — d...

SKU: AF-5905 | Brand: Adafruit

The Adafruit Proto Under Plate PiCowbell is a single-slot prototyping base for the Raspberry Pi Pico or Pico W. It provides a reset button, a STEMMA QT / Qwiic connector, a prototyping grid, and double-row socket head...

SKU: AF-5741 | Brand: Adafruit

A replacement slide knob made from conductive plastic, designed for potentiometers with capacitive touch detection on the slider. The 11 mm wide nubbin fits standard slide potentiometer tracks. The conductive materia...