Brands and Manufacturers

SKU: AF-4816 | Brand: Adafruit

The BMP390 from Bosch (also known as BMP390L) is a high-precision barometric pressure and temperature sensor, offering the best altitude accuracy in the Bosch pressure sensor lineup. With relative accuracy of ±3 Pasca...

SKU: AF-2264 | Brand: Adafruit

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, ...

SKU: AF-3013 | Brand: Adafruit

The Adafruit DS3231 Precision RTC is a highly accurate I2C real-time clock breakout with an integrated temperature-compensated crystal oscillator (TCXO). Unlike standard RTCs that rely on an external 32 kHz crystal, t...

SKU: AF-5440 | Brand: Adafruit

The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, trac...

SKU: AF-4931 | Brand: Adafruit

This thin silvery ribbon is an interesting sensor. It's made of 2mm wide by 600mm long piezoelectric film sandwich. Piezo film can be used to detect motion or vibration - when shifted around or touched, it create...

SKU: AF-395 | Brand: Adafruit

An 8-channel bidirectional logic level converter breakout based on the TXB0108 chip. This converter automatically detects signal direction, eliminating the need for direction control pins. It shifts between virtually ...

SKU: AF-5957 | Brand: Adafruit

The Adafruit DVI Sock is a compact DVI/HDMI output board designed to solder directly onto the end of a Raspberry Pi Pico or Pico W like a little PCB sock. Using the RP2040's PIO system, it enables your Pico to drive a...

SKU: AF-5628 | Brand: Adafruit

A compact, self-centering analogue thumbstick with a feel and size similar to Nintendo Joy-Con joysticks. It uses two 10kΩ potentiometers (one for each axis) to provide proportional X/Y analogue output, plus a centre-...

SKU: AF-5157 | Brand: Adafruit

The Adafruit NeoKey 5×6 Ortho is a snap-apart PCB grid of 30 mechanical key switch sockets, each with a reverse-mount NeoPixel LED. Break the grid along its scored tabs to create any rectangular layout you need — 2×3,...

SKU: AF-4836 | Brand: Adafruit

Turn a Wii Nunchuck into a versatile I2C controller for your next project with the Adafruit Wii Nunchuck Breakout Adapter. It fits snugly into the Wii connector and handles level shifting and power regulation, so you ...

SKU: AF-4471 | Brand: Adafruit

The Adafruit MCP2221A Breakout lets your computer talk directly to I2C devices, sensors, and GPIO — no microcontroller required. Drive an OLED display, read a colour sensor, flash LEDs, or read buttons straight from P...

SKU: AF-2349 | Brand: Adafruit

This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce IR off objects to determine their reflectivity. White &...

SKU: AF-6174 | Brand: Adafruit

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...

SKU: AF-5989 | Brand: Adafruit

The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...

SKU: AF-5947 | Brand: Adafruit

The Adafruit PiCowbell OV5640 Camera Breakout with 160° Wide-Angle Lens adds a 5-megapixel camera with an ultra-wide 160-degree field of view to your Raspberry Pi Pico or Pico W. The widest lens option in the PiCowbel...

SKU: AF-4534 | Brand: Adafruit

The Bonsai Buckaroo is a compact add-on board for micro:bit and Adafruit CLUE that turns your board into a plant care monitoring and watering system. Bolt it on with 5 screws to get a buzzer, motor driver, and soil mo...

SKU: AF-4881 | Brand: Adafruit

Here is a jolly cute, palm-sized, Bluetooth-enabled sensor to monitor your room's temperature and humidity. Only 43mm x 43mm, we dig its small form factor and minimal design. The shell is made of durable ABS&nbsp...

SKU: AF-1093 | Brand: Adafruit

Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatibles. It can be used by students, artists, athletes, makers, and game & m...

SKU: AF-789 | Brand: Adafruit

The Adafruit PN532 NFC/RFID Controller Shield brings 13.56 MHz NFC and RFID capabilities to your Arduino. Built around the PN532 chipset — the most widely used NFC controller, found in virtually every NFC-enabled phon...

SKU: AF-6260 | Brand: Adafruit

The Adafruit SHT45 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with Sensirion's highest-precision SHT45 temperature and humidity sensor, protected by a PTFE filter. Simply plug it into any...